Improvement of Interfacial Strength with the Addition of Ni in Al/Cu Dissimilar Joints Produced via Laser Brazing
Source abstract
Abstract
Dissimilar metal joining between Al and Cu is effective to reduce the cost and weight of electrical components. In this study, dissimilar laser lap brazing of Al containing Ni to pure Cu was conducted, and the effect of the addition of Ni on the joint strength and microstructure at the dissimilar interface was examined. The addition of Ni higher than 2.8 at. pct improved the joint strength effectively, even though the thickness of the IMC layer at the dissimilar interface increased. The addition of Ni additionally produced not only (Ni,Cu)Al particles in θ-Al2Cu but also a (Ni,Cu)Al layer at the θ-Al2Cu/γ1-Al4Cu9 interface. This study implied that the addition of Ni to Al resulted in the formation of a (Ni,Cu)Al layer at the weakest interface between θ-Al2Cu and γ1-Al4Cu9, drastically increasing the strength of the Al/Cu dissimilar joint.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. J.P. Immarigeon, R.P. Holt, A.K. Koul, L. Zhao, W. Wallace, and J.C. Beddoes: Mater. Charact., 1995, vol. 35, pp. 41–67.10.1016/1044-5803(95)00066-6 ↗
2. R. Uscinowicz: Compos. Part B, 2013, vol. 44, pp. 344–56.10.1016/j.compositesb.2012.04.073 ↗
3. Y. Funamizu and K. Watanabe: Trans. Jpn. Inst. Met., 1971, vol. 12, pp. 147–52.10.2320/matertrans1960.12.147 ↗
4. T.M. Wang, F. Cao, P. Zhou, H.J. Kang, Z.N. Chen, Y.N. Fu, T.Q. Xiao, W.X. Huang, and Q.X. Yuan: J. Alloys Compd., 2014, vol. 616, pp. 550–55.10.1016/j.jallcom.2014.07.172 ↗
5. S. Tavassoli, M. Abbasi, and R. Tahavvori: Mater. Des., 2016, vol. 108, pp. 343–53.10.1016/j.matdes.2016.06.076 ↗
6. C.Y. Chen and W.S. Hwang: Mater. Trans., 2007, vol. 48, pp. 1938–47.10.2320/matertrans.MER2006371 ↗
7. A. Gueydan, B. Domengès, and E. Hug: Intermetallics, 2014, vol. 50, pp. 34–42.10.1016/j.intermet.2014.02.007 ↗
8. M. Abbasi, A. Karimi Taheri, and M.T. Salehi: J. Alloys Compd., 2001, vol. 319, pp. 233–41.10.1016/S0925-8388(01)00872-6 ↗
9. W.B. Lee, K.S. Bang, and S.B Jung: J. Alloys Compd., 2005, vol. 390, pp. 212–19.10.1016/j.jallcom.2004.07.057 ↗
10. P. Xue, B.L. Xiao, and Z.Y. Ma: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 3091–3103.10.1007/s11661-015-2909-1 ↗
11. J.C. Feng, Y.B. Liu, Q.J. Sun, J.P. Liu, and L.J. Wu: Adv. Eng. Mater., 2015, vol. 17, pp. 1480–85.10.1002/adem.201400573 ↗
12. Z.P. Cai, B.Q. Ai, R. Cao, Q. Lin, and J.H. Chen: J. Mater. Res., 2016, vol. 31, pp. 2876–87.10.1557/jmr.2016.295 ↗
13. X.L. Zhou, G. Zhang, Y. Shi, M. Zhu, and F.Q. Yang: Mater. Sci. Eng. A, 2017, vol. 705, pp. 105–13.10.1016/j.msea.2017.08.056 ↗
14. T.A. Mai and A.C. Spowage: Mater. Sci. Eng. A, 2004, vol. 374, pp. 224–33.10.1016/j.msea.2004.02.025 ↗
15. T. Solchenbach and P. Plapper: Opt. Laser Technol., 2013, vol. 54, pp. 249–56.10.1016/j.optlastec.2013.06.003 ↗
16. P. Schmalen and P. Plapper: Phys. Proc., 2016, vol. 83, pp. 506–14.10.1016/j.phpro.2016.08.052 ↗
17. Y.N. Wei, J.L. Li, J.T. Xiong, and F.S. Zhang: J. Eng. Sci. Technol., 2016, vol. 19, pp. 90–95.
18. W.Y. Li, Q. Wen, X.W. Yang, Y.S. Wang, D.L. Gao, and W.B. Wang: Mater. Des., 2017, vol. 134, pp. 383–93.10.1016/j.matdes.2017.08.065 ↗
19. P. Xue, B.L. Xiao, D.R. Ni, and Z.Y. Ma: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5723–27.10.1016/j.msea.2010.05.061 ↗
20. M.F.X. Muthu and V. Jayabalan: J. Mater. Process. Technol., 2015, vol. 217, pp. 105–13.10.1016/j.jmatprotec.2014.11.007 ↗
21. K.P. Mehta and V.J. Badheka: J. Mater. Process. Technol., 2017, vol. 239, pp. 336–4510.1016/j.jmatprotec.2016.08.037 ↗
22. S.I. Matsuaka and H. Imai: J. Mater. Process. Technol., 2009, vol. 209, pp. 954–60.10.1016/j.jmatprotec.2008.03.006 ↗
23. Y.Y. Zhao, D. Li, and Y.S. Zhang: Sci. Technol. Weld. Join., 2013, vol. 18, pp. 354–60.10.1179/1362171813Y.0000000114 ↗
24. J.W. Yang, B. Cao, X.C. He, and H.S. Luo: Sci. Technol. Weld. Join., 2014, vol. 19, pp. 500–04.10.1179/1362171814Y.0000000218 ↗
25. M. Braunovic and N. Alexandrov: IEEE Trans. Compon. Packag. Manuf. Technol. A, 1994, vol. 17, pp. 78–85.10.1109/95.296372 ↗
26. C.Z. Xia, Y.J. Li, U.A. Puchkov, S.A. Gerasimov, and J. Wang: Vacuum, 2008, vol. 82, pp. 799–804.10.1016/j.vacuum.2007.11.007 ↗
27. A. Esmaeili, H.R.Z. Rajani, M. Sharbati, M.K.B. Givi, and M. Shamanian: Intermetallics, 2011, vol. 19, pp. 1711–19.10.1016/j.intermet.2011.07.006 ↗
28. F. Ji, S. Xue, and W. Dai: Mater. Des., 2012, vol. 42, pp. 156–63.10.1016/j.matdes.2012.05.028 ↗
29. L. Zhou, L.Y. Luo, C.W. Tan, Z.Y. Li, X.G. Song, H.Y. Zhao, Y.X. Huang, and J.C. Feng: Opt. Laser Technol., 2018, vol. 98, pp. 234–46.10.1016/j.optlastec.2017.08.004 ↗
30. H.S. Furuya, Y.T Sato, Y.S Sato, H. Kokawa, and Y. Tatsumi: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 527–36.10.1007/s11661-017-4442-x ↗
31. J.L. Murraym: Int. Met. Rev., 1985, vol. 30, pp. 211–33.
32. H. Jacobi and H.J. Engell: Acta Metall., 1971, vol. 19, pp. 701–11.10.1016/0001-6160(71)90025-3 ↗
33. A. Prince: Light Met. Syst. Part 2, 2005, pp. 1–23.
34. J.A. Rayne, M.P. Shearer, and C.L. Bauer: Thin Solid Films, 1980, vol. 65, pp. 381–91.10.1016/0040-6090(80)90248-5 ↗
35. E.R. Wallach and G.J. Davies: Met. Technol., 1997, vol. 4, pp. 183–90.10.1179/030716977803292024 ↗
36. L. Pan, P. Li, X. Hao, J. Zhou, and H. Dong: J. Mater. Process. Technol., 2018, vol. 255, pp. 308–18.10.1016/j.jmatprotec.2017.12.027 ↗