journal article·2018-02

Bulk Nanolaminated Nickel: Preparation, Microstructure, Mechanical Property, and Thermal Stability

Fan Liu, Hao Yuan, Sunkulp Goel, Ying Liu, Jing Tao Wang

Publisher page

Abstract

A bulk nanolaminated (NL) structure with distinctive fractions of low- and high-angle grain boundaries (f LAGBs and f HAGBs) is produced in pure nickel, through a two-step process of primary grain refinement by equal-channel angular pressing (ECAP), followed by a secondary geometrical refinement via liquid nitrogen rolling (LNR). The lamellar boundary spacings of 2N and 4N nickel are refined to ~ 40 and ~ 70 nm, respectively, and the yield strength of the NL structure in 2N nickel reaches ~ 1.5 GPa. The impacts of the deformation path, material purity, grain boundary (GB) misorientation, and energy on the microstructure, refinement ability, mechanical strength, and thermal stability are investigated to understand the inherent governing mechanisms. GB migration is the main restoration mechanism limiting the refinement of an NL structure in 4N nickel, while in 2N nickel, shear banding occurs and mediates one-fifth of the total true normal rolling strain at the mesoscale, restricting further refinement. Three typical structures [ultrafine grained (UFG), NL with low f LAGBs, and NL with high f LAGBs] obtained through three different combinations of ECAP and LNR were studied by isochronal annealing for 1 hour at temperatures ranging from 433 K to 973 K (160 °C to 700 °C). Higher thermal stability in the NL structure with high f LAGBs is shown by a 50 K (50 °C) delay in the initiation temperature of recrystallization. Based on calculations and analyses of the stored energies of deformed structures from strain distribution, as characterized by kernel average misorientation (KAM), and from GB misorientations, higher thermal stability is attributed to high f LAGBs in this type of NL structure. This is confirmed by a slower change in the microstructure, as revealed by characterizing its annealing kinetics using KAM maps.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Progr. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
2. Y. Huang and P.B. Prangnell: Acta Mater., 2008, vol. 56, pp. 1619–32.10.1016/j.actamat.2007.12.017 ↗
3. X.C. Liu, H.W. Zhang, and K. Lu: Science, 2013, vol. 342, pp. 337–40.10.1126/science.1242578 ↗
4. T. Konkova, S. Mironov, A. Korznikov, and S.L. Semiatin: Acta Mater., 2010, vol. 58, pp. 5262–73.10.1016/j.actamat.2010.05.056 ↗
5. H.W. Zhang, X. Huang, R. Pippan, and N. Hansen: Acta Mater., 2010, vol. 58, pp. 1698–1707.10.1016/j.actamat.2009.11.012 ↗
6. X.C. Liu, H.W. Zhang, and K. Lu: Acta Mater., 2015, vol. 96, pp. 24–36.10.1016/j.actamat.2015.06.014 ↗
7. R. Pippan, S. Scheriau, A. Taylor, M. Hafok, A. Hohenwarter, and A. Bachmaier: Ann. Rev. Mater. Res., 2010, vol. 40, pp. 319–43.10.1146/annurev-matsci-070909-104445 ↗
8. A.P. Zhilyaev, S. Swaminathan, A.I. Pshenichnyuk, T.G. Langdon, and T.R. McNelley: J. Mater. Sci., 2013, vol. 48, pp. 4626–36.10.1007/s10853-013-7254-4 ↗
9. F. Liu, H. Yuan, J. Yin, and J.T. Wang: Mater. Sci. Eng., A, 2016, vol. 662, pp. 578–87.10.1016/j.msea.2016.03.022 ↗
10. F.A. Mohamed: Acta Mater., 2003, vol. 51, pp. 4107–19.10.1016/S1359-6454(03)00230-1 ↗
11. O. Renk, A. Hohenwarter, S. Wurster, and R. Pippan: Acta Mater., 2014, vol. 77, pp. 401–10.10.1016/j.actamat.2014.06.010 ↗
12. T. Yu, N. Hansen, X. Huang, and A. Godfrey: Mater. Res. Lett., 2014, vol. 2, pp. 160–65.10.1080/21663831.2014.886308 ↗
13. Y.S. Li, N.R. Tao, and K. Lu: Acta Mater., 2008, vol. 56, pp. 230–41.10.1016/j.actamat.2007.09.020 ↗
14. E.V. Naidenkin, K.V. Ivanov, and E.V. Golosov: Russ. Metall., 2014, vol. 2014, pp. 303–07.10.1134/S0036029514040107 ↗
15. K. Edalati, J.M. Cubero-Sesin, A. Alhamidi, I.F. Mohamed, and Z. Horita: Mater. Sci. Eng., A, 2014, vol. 613, pp. 103–10.10.1016/j.msea.2014.06.084 ↗
16. T.R. Lee, C.P. Chang, and P.W. Kao: Mater. Sci. Eng., A, 2005, vol. 408, pp. 131–35.10.1016/j.msea.2005.07.045 ↗
17. G.B. Rathmayr and R. Pippan: Acta Mater., 2011, vol. 59, pp. 7228–40.10.1016/j.actamat.2011.08.023 ↗
18. N.D. Stepanov, A.V. Kuznetsov, G.A. Salishchev, G.I. Raab, and R.Z. Valiev: Mater. Sci. Eng., A, 2012, vol. 554, pp. 105–15.10.1016/j.msea.2012.06.022 ↗
19. A.P. Zhilyaev, B.K. Kim, J.A. Szpunar, M.D. Bar, and T.G. Langdon: Mater. Sci. Eng., A, 2005, vol. 391, pp. 377–89.10.1016/j.msea.2004.09.030 ↗
20. S. Hazra, A. Gazder, A. Carman, and E. Pereloma: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1334–48.10.1007/s11661-010-0535-5 ↗
21. G.P. Dinda, H. Rösner, and G. Wilde: Scripta Mater., 2005, vol. 52, pp. 577–82.10.1016/j.scriptamat.2004.11.034 ↗
22. D.A. Hughes and N. Hansen: Phys. Rev. Lett., 2014, vol. 112, p. 135504.10.1103/PhysRevLett.112.135504 ↗
23. K. Wang, N.R. Tao, G. Liu, J. Lu, and K. Lu: Acta Mater., 2006, vol. 54, pp. 5281–91.10.1016/j.actamat.2006.07.013 ↗
24. X.C. Liu, H.W. Zhang, and K. Lu: Scripta Mater., 2015, vol. 95, pp. 54–57.10.1016/j.scriptamat.2014.10.003 ↗
25. Y.B. Zhang, O.V. Mishin, N. Kamikawa, A. Godfrey, W. Liu, and Q. Liu: Mater. Sci. Eng., A, 2013, vol. 576, pp. 160–66.10.1016/j.msea.2013.04.002 ↗
26. J.Q. Duan, M.Z. Quadir, and M. Ferry: Metall. Mater. Trans. A, 2015, vol. 47A, pp. 471–78.
27. T. Nizolek, N.A. Mara, I.J. Beyerlein, J.T. Avallone, J.E. Scott, and T.M. Pollock: Metallogr. Microstr. Analy., 2014, vol. 3, pp. 470–76.10.1007/s13632-014-0172-2 ↗
28. I.J. Beyerlein, N.A. Mara, J. Wang, J.S. Carpenter, S.J. Zheng, W.Z. Han, R.F. Zhang, K. Kang, T. Nizolek, and T.M. Pollock: JOM, 2012, vol. 64, pp. 1192–1207.10.1007/s11837-012-0431-0 ↗
29. Y.F. Sun, N. Tsuji, H. Fujii, and F.S. Li: J. Alloys Compd., 2010, vol. 504, pp. S443–S447.10.1016/j.jallcom.2010.02.201 ↗
30. R.Z. Valiev and T.G. Langdon: Progr. Mater. Sci., 2006, vol. 51, pp. 881–981.10.1016/j.pmatsci.2006.02.003 ↗
31. S. Li, X. Li, and L. Yang: Acta Mater., 2013, vol. 61, pp. 4398–4413.10.1016/j.actamat.2013.04.010 ↗
32. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Acta Mater., 1998, vol. 46, pp. 3317–31.10.1016/S1359-6454(97)00494-1 ↗
33. P.B. Prangnell, J.R. Bowen, and P.J. Apps: Mater. Sci. Eng., A, 2004, vols. 375–377, pp. 178–85.10.1016/j.msea.2003.10.170 ↗
34. L. Dupuy and E.F. Rauch: Mater. Sci. Eng., A, 2002, vol. 337, pp. 241–47.10.1016/S0921-5093(02)00027-8 ↗
35. F. Liu, Y. Liu, and J.T. Wang: Mater. Sci. Forum, 2016, vol. 850, pp. 419–25.10.4028/www.scientific.net/MSF.850.419 ↗
36. R.R. Keller and R.H. Geiss: J. Microsc., 2012, vol. 245, pp. 245–51.10.1111/j.1365-2818.2011.03566.x ↗
37. P.W. Trimby, Y. Cao, Z. Chen, S. Han, K.J. Hemker, J. Lian, X. Liao, P. Rottmann, S. Samudrala, J. Sun, J.T. Wang, J. Wheeler, and J.M. Cairney: Acta Mater., 2014, vol. 62, pp. 69–80.10.1016/j.actamat.2013.09.026 ↗
38. K.S. Raju, M.G. Krishna, K.A. Padmanabhan, K. Muraleedharan, N.P. Gurao, and G. Wilde: Mater. Sci. Eng., A, 2008, vol. 491, pp. 1–7.10.1016/j.msea.2007.11.072 ↗
39. Y.T. Zhu and T.C. Lowe: Mater. Sci. Eng., A, 2000, vol. 291, pp. 46–53.10.1016/S0921-5093(00)00978-3 ↗
40. S.I. Wright, M.M. Nowell, and D.P. Field: Microsc. Microanal., 2011, vol. 17, pp. 316–29.10.1017/S1431927611000055 ↗
41. S. Li, I.J. Beyerlein, D.J. Alexander, and S.C. Vogel: Acta Mater., 2005, vol. 53, pp. 2111–25.10.1016/j.actamat.2005.01.023 ↗
42. T. Yu, D.A. Hughes, N. Hansen, and X. Huang: Acta Mater., 2015, vol. 86, pp. 269–78.10.1016/j.actamat.2014.12.014 ↗
43. J. Hirsch and K. Lücke: Acta Metall., 1988, vol. 36, pp. 2863–82.10.1016/0001-6160(88)90172-1 ↗
44. N. Krasilnikov, W. Lojkowski, M. Cabibbo, and R. Valiev: Mater. Sci. Eng., A, 2005, vol. 397, pp. 330–37.10.1016/j.msea.2005.03.001 ↗
45. H.W. Zhang, X. Huang, and N. Hansen: Acta Mater., 2008, vol. 56, pp. 5451–65.10.1016/j.actamat.2008.07.040 ↗
46. W. Wang, F. Yuan, and X. Wu: Comput. Mater. Sci., 2015, vol. 110, pp. 83–90.10.1016/j.commatsci.2015.08.001 ↗
47. H. Jazaeri and F.J. Humphreys: Acta Mater., 2004, vol. 52, pp. 3239–50.10.1016/j.actamat.2004.03.030 ↗
48. D. Prokoshkina, V.A. Esin, G. Wilde, and S.V. Divinski: Acta Mater., 2013, vol. 61, pp. 5188–97.10.1016/j.actamat.2013.05.010 ↗
49. S.V. Divinski, G. Reglitz, and G. Wilde: Acta Mater., 2010, vol. 58, pp. 386–95.10.1016/j.actamat.2009.09.015 ↗
50. O.V. Mishin, A. Godfrey, D. Juul Jensen, and N. Hansen: Acta Mater., 2013, vol. 61, pp. 5354–64.10.1016/j.actamat.2013.05.024 ↗
51. K. Edalati, D. Akama, A. Nishio, S. Lee, Y. Yonenaga, J.M. Cubero-Sesin, and Z. Horita: Acta Mater., 2014, vol. 69, pp. 68–77.10.1016/j.actamat.2014.01.036 ↗
52. C.C. Koch, R.O. Scattergood, K.A. Darling, and J.E. Semones: J. Mater. Sci., 2008, vol. 43, pp. 7264–72.10.1007/s10853-008-2870-0 ↗
53. V.V. Popov, E.N. Popova, V.P. Pilyugin, D.D. Kuznetsov, and A.V. Stolbovsky: IOP Conf. Ser.: Mater. Sci. Eng., 2014, vol. 63, p. 012096.10.1088/1757-899X/63/1/012096 ↗
54. M.A. Meyers, A. Mishra, and D.J. Benson: Progr. Mater. Sci., 2006, vol. 51, pp. 427–556.10.1016/j.pmatsci.2005.08.003 ↗
55. P.J. Apps, J.R. Bowen, and P.B. Prangnell: Acta Mater., 2003, vol. 51, pp. 2811–22.10.1016/S1359-6454(03)00086-7 ↗
56. J.L. Sun, P.W. Trimby, F.K. Yan, X.Z. Liao, N.R. Tao, and J.T. Wang: Acta Mater., 2014, vol. 79, pp. 47–58.10.1016/j.actamat.2014.07.011 ↗
57. C.X. Huang, K. Wang, S.D. Wu, Z.F. Zhang, G.Y. Li, and S.X. Li: Acta Mater., 2006, vol. 54, pp. 655–65.10.1016/j.actamat.2005.10.002 ↗
58. K. Xia and J. Wang: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2639–47.10.1007/s11661-001-0054-5 ↗
59. M. Calcagnotto, D. Ponge, E. Demir, and D. Raabe: Mater. Sci. Eng., A, 2010, vol. 527, pp. 2738–46.10.1016/j.msea.2010.01.004 ↗
60. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Oxford, United Kingdom, 2004.
61. Y. Ateba Betanda, A.-L. Helbert, F. Brisset, M.-H. Mathon, T. Waeckerlé, and T. Baudin: Mater. Sci. Eng., A, 2014, vol. 614, pp. 193–98.10.1016/j.msea.2014.07.037 ↗
62. W.T. Read and W. Shockly: Phys. Rev. A, 1950, vol. 78, pp. 275–89.10.1103/PhysRev.78.275 ↗
63. T. Knudsen, W.Q. Cao, A. Godfrey, Q. Liu, and N. Hansen: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 430–40.10.1007/s11661-007-9421-1 ↗
64. R.A. Vandermeer and N. Hansen: Acta Mater., 2008, vol. 56, pp. 5719–27.10.1016/j.actamat.2008.07.038 ↗
65. W.Q. Cao, A. Godfrey, W. Liu, and Q. Liu: Mater. Lett., 2003, vol. 57, pp. 3767–74.10.1016/S0167-577X(03)00176-9 ↗
66. G.H. Zahid, Y. Huang, and P.B. Prangnell: Acta Mater., 2009, vol. 57, pp. 3509–21.10.1016/j.actamat.2009.04.010 ↗
67. D. Terada, H. Houda, and N. Tsuji: J. Mater. Sci., 2008, vol. 43, pp. 7331–37.10.1007/s10853-008-2809-5 ↗
68. E.I. Galindo-Nava and P.E.J. Rivera-Díaz-del-Castillo: Acta Mater., 2012, vol. 60, pp. 4370–78.10.1016/j.actamat.2012.05.003 ↗
69. Y. Huang and F.J. Humphreys: Acta Mater., 2000, vol. 48, pp. 2017–30.10.1016/S1359-6454(99)00418-8 ↗