On the Occurrence of Liquation During Linear Friction Welding of Ni-Based Superalloys
Source abstract
Abstract
A combination of experimental and analytical methods was used to study the possible occurrence of liquation during LFW of the newly developed AD730TM Ni-based superalloy. LFWed joints were produced using a semi-industrial size facility and the interfaces of the joints as well as the ejected flash were examined using optical and Field Emission Gun Scanning Electron Microscopy (FEG-SEM). Physical simulation of the LFW thermal cycle, using thermomechanical simulator Gleeble™ 3800, showed that incipient melting started from 1473 K (1200 °C). The analytical model, calibrated by experiments, predicted that the highest temperature of the interface was about 1523 K (1250 °C). The constitutive equations based on lattice and pipe diffusion models were developed to quantify the self-diffusivity of the elements and control the extent of liquation by considering the effect of LFW process parameters. Analytical results show that the application of compressive stresses during LFW results in 25 times increase in the diffusion of Ni atoms at the weld interface. Therefore, no presence of re-solidified phases, i.e., occurrence of liquation, was observed in the microstructure of the weld zone or the flash in the present study. Based on the obtained results, a methodology was developed for designing the optimum pressure above which no liquation, and hence cracking, will be observable.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. A. Devaux, B. Picque, M.F. Gervais, E .Georges, T. Poulain, P. Heritier, TMS Superalloys, 2012, pp. 911–19.10.1002/9781118516430.ch100 ↗
2. [2] C. Mary, M. Jahazi, Adv. Mater. Research, 2007, vol. 15-17, pp. 357-62.10.4028/www.scientific.net/AMR.15-17.357 ↗
3. [3] I. Bhamji, M. Preuss, P.L. Threadgill, A.C. Addison, Mater. Sci. Tech., 2011, vol. 27(1), pp. 2-12.10.1179/026708310X520510 ↗
4. [4] M.B. Uday, M.N. Ahmad Fauzi, H. Zuhailawati, A.B. Ismail, Sci. Technol. Weld. Joi. 2010, vol. 15(7), pp. 534-58.10.1179/136217110X12785889550064 ↗
5. [5] A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue, Mater. Design, 2012, vol. 36, pp. 113-22.10.1016/j.matdes.2011.11.007 ↗
6. [6] O.T. Ola, O.A. Ojo, P. Wangara, M.C. Chaturvedi, Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3761-77.10.1007/s11661-011-0774-0 ↗
7. [7] O.A. Ojo, N.L. Richards, M.C. Chaturvedi, Scr. Mater., 2004, vol. 50, pp. 641-46.10.1016/j.scriptamat.2003.11.025 ↗
8. [8] S.M. Mousavizade, F.M. Ghaini, M.J. Torkamany, J. Sabbaghzadehb, A. Abdollah-zadeh, Scr. Mater., 2009, vol. 60(4), pp. 244-47.10.1016/j.scriptamat.2008.10.021 ↗
9. [9] H.R. Zhang, O.A. Ojo, M.C. Chaturvedi, Scr. Mater., 2008, vol. 58, pp. 167-70.10.1016/j.scriptamat.2007.09.049 ↗
10. [10] D. Dye, O. Hunziker, R.C. Reed, Acta Mater., 2001, vol. 49, pp. 683-97.10.1016/S1359-6454(00)00361-X ↗
11. [11] R. Nakkalil, N.L. Richards, M.C. Chaturvedi, Scr. Metall. Mater., 1992, vol. 26, pp. 1599-04.10.1016/0956-716X(92)90263-E ↗
12. [12] Y. Danis, C. Arvieu, E. Lacoste, T. Larrouy, Mater. Design, 2010, vol. 31(1), pp. 402-16.10.1016/j.matdes.2009.05.041 ↗
13. [13] A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue, Metall. Mater. Trans. A, 2011, vol. 42A, pp. 729-44.10.1007/s11661-010-0457-2 ↗
14. [14] A. Vairis, M. Frost, Mat. Sci. Eng. A, 2000, vol. 292, pp. 8-17.10.1016/S0921-5093(00)01036-4 ↗
15. [15] W.Y. Li, T.J. Ma, J.L. Li, Mater. Design, 2010, vol. 32, pp. 1497-07.10.1016/j.matdes.2009.08.023 ↗
16. [16] B.S. Yilbas, A.Z. Sahin, Friction Welding: Thermal and Metallurgical Characteristics. NewYork, Springer, 2014, pp. 48-53.10.1007/978-3-642-54607-5 ↗
17. [17] W. Li, A. Vairis, M. Preuss, T. Ma, Int. Mater. Rev., 2016, vol. 61(2), pp. 71-100.10.1080/09506608.2015.1109214 ↗
18. T. Shinoda, Y. Mizuno, J. Li, T. Saito, Weld. Int. 2000, vol. 14(6), pp. 425-30.10.1080/09507110009549206 ↗
19. M. SoucailI, A. Moal, L. Naze, E. Massoni, C. Levaillant, Y. Bienvenu, TMS Superalloys, 1992, pp. 847–56.10.7449/1992/Superalloys_1992_847_856 ↗
20. [20] J.T. Xiong, J.L. Li, Y.N. Wei, F.S. Zhang, W.D. Huang, Acta Mater., 2013, vol. 61, pp. 1662-75.10.1016/j.actamat.2012.11.042 ↗
21. T.L. Bergman, A.S. Lavine, F.P. Incropera, D.P. Dewitt, Fundamentals of Heat and Mass Transfer, New Jersey, Wiley, Hoboken, 2011, pp. 378-17.
22. H. Bateman, Partial differential equations of mathematical physics, Cambridge University Press and The Macmillan Co., New York, 1944, pp. 118–25, 218–21, 338–45.
23. [23] F. Masoumi, M. Jahazi, D. Shahriari, J. Cormier, J. Alloys Compd., 2016, vol. 658, pp. 981-95.10.1016/j.jallcom.2015.11.002 ↗
24. [24] X. Yang, W. Li, J. Li, B. Xiao, T. Ma, Z. Huang, J. Guo, Mater. Design, 2015, vol. 87, pp. 215-30.10.1016/j.matdes.2015.08.036 ↗
25. [25] Y. Wang, W.Z. Shao, L. Zhen, B.Y. Zhang, Mater. Sci. Eng. A, 2011, vol. 528, pp. 3218-27.10.1016/j.msea.2011.01.013 ↗
26. [26] G.B. Viswanathan, R. Shi, A. Genc, V.A. Vorontsov, L. Kovarik, C.M.F. Rae, M.J. Mills, Scr. Mater., 2015, vol. 94, pp. 5-8.10.1016/j.scriptamat.2014.06.032 ↗
27. [27] O.T. Ola, O.A. Ojo, M.C. Chaturvedi, Mater. Sci. Eng. A, 2013, vol. 585, pp. 319-25.10.1016/j.msea.2013.06.088 ↗
28. [28] D. Shahriari, M.H. Sadeghi, A . Akbarzadeh, M. Cheraghzadeh, Int. J. Adv. Manuf. Technol., 2009, vol. 45(9–10), pp. 841-50.10.1007/s00170-009-2036-5 ↗
29. [29] J. Cormier, X. Milhet, J. Mendez, Acta Mater., 2007, vol. 55, pp. 6250-59.10.1016/j.actamat.2007.07.048 ↗
30. [30] R. Giraud, Z. Hervier, J. Cormier, G. St Martin, F. Hamon, X. Milhet, J. Mendez, Metall. Mater. Trans. A, 2013, vol. 44A, pp. 131-46.10.1007/s11661-012-1397-9 ↗
31. D. A. Porter, K. E. Easterling, Phase transformation in metals and alloys, London, UK, Chapman & Hall, London, 1996, pp. 100-78.
32. [32] I. Bhamji, M. Preuss, P.L. Threadgill, A.C. Addison, Mater. Sci. Technol., 2011, vol. 27(1), pp. 2-12.10.1179/026708310X520510 ↗
33. [33] A. Chamanfar, M. Jahazi, J. Cormier, Metall. Mater. Trans A, 2015, vol. 46 (4), pp. 1639-69.10.1007/s11661-015-2752-4 ↗
34. [34] C. Mary, M. Jahazi, Adv. Eng. Mater., 2008, vol. 10(6), pp. 573-78.10.1002/adem.200700361 ↗
35. [35] M. Soucail, Y. Bienvenu, Mater. Sci. Eng. A, 1996, vol. 220, pp. 215-22.10.1016/S0921-5093(97)80011-1 ↗
36. [36] J. Cormier, X. Milhet, J. Mendez, J. Mat. Sci., 2007, vol. 42, pp. 7780-86.10.1007/s10853-007-1645-3 ↗
37. [37] X. Milhet, M. Arnoux, V. Pelosin, J. Colin, Metall. Mater. Trans A, 2013, vol. 44A(5), pp. 2031-2040.10.1007/s11661-012-1575-9 ↗
38. [38] G. Wang, D.S. Xu, N. Ma, N. Zhou, E.J. Payton, R.Yang, M.J. Mills, Y. Wang, Acta Mater., 2009, vol. 57, pp. 316-25.10.1016/j.actamat.2008.09.010 ↗
39. F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, A. Devaux, Sci. Rep., 2016, 6, 28650. doi:10.1038/srep2865010.1038/srep28650 ↗
40. [40] T. Altan, G. Ngaile, G. Shen, Cold and hot forging: fundamentals and applications, Ohio, ASM International, 2005, pp. 176-181.10.31399/asm.tb.chffa.9781627083003 ↗
41. [41] T. Xu, Philos. Mag., 2003, vol. 83 (7), pp. 889-99.10.1080/0141861021000049247 ↗
42. [42] D.R. Lesuer, C.K. Syn, J.D. Whittenberger, M. Carsi, O.A. Ruano, O.D. Sherby, Mater. Sci. Eng. A, 2001, vol. 317, pp.101-07.10.1016/S0921-5093(01)01167-4 ↗
43. [43] D. Samantaray, C. Phaniraj, S. Mandal, A.K. Bhaduri, Mater. Sci. Eng. A, 2011, vol. 528, pp. 1071-77.10.1016/j.msea.2010.10.036 ↗
44. [44] S. Matsumoto, T. Tokunaga, H. Ohtani, M. Hasebe, Mater. T. JIM. 2005, vol. 46(12), pp. 2920-30.10.2320/matertrans.46.2920 ↗
45. B.G. Choi, I.S. Kim, D.H. Kim, S.M. Seo, C.Y. Jo, TMS Superalloys, 2004, pp. 163–71.10.7449/2004/Superalloys_2004_163_171 ↗
46. G. K. Bouse, TMS Superalloys, 1996, pp. 163–72.10.7449/1996/Superalloys_1996_163_172 ↗
47. F. Masoumi, M. Jahazi, J. Cormier, D. Shahriari, MATEC Web of Conferences, 2014, vol. 14, 13005- pp. 1–6.10.1051/matecconf/20141413005 ↗
48. [48] D. Shahriari, M.H. Sadeghi, A. Akbarzadeh, Mater. Manuf. Processes, 2009, vol. 24, pp. 559-63.10.1080/10426910902746820 ↗
49. [49] R.C.Reed, The Superalloys: Fundamentals and Applications. New York, Cambridge University Press, 2006, pp. 53-55.10.1017/CBO9780511541285 ↗
50. [50] Matthew J. Donachie, Stephen J. Donachie, Superalloys A Technical Guide, Ohio, ASM International, Metals Park, 2002, pp. 1-39.10.31399/asm.tb.stg2.9781627082679 ↗
51. [51] S.L. Robinson, O.D. Sherby, Acta Met., 1969, vol. 17, pp. 109-25.10.1016/0001-6160(69)90132-1 ↗
52. [52] A.S. Argon, Scr. Metall. Mater., 1970, vol. 4, pp. 1001-04.10.1016/0036-9748(70)90048-7 ↗
53. [53] H. Frost, M. Ashby, Deformation-mechanism maps, The plasticity and creep of metals and ceramics, Oxford, Pergamon Press, 1982, chapter 7.
54. M.F. Ashby, R.A. Verrall, Philos. Trans. R. Soc. Lond., 1978, vol. 288, pp. 59-95.10.1098/rsta.1978.0006 ↗
55. [55] B. Grant, M. Preuss, P.J. Withers, G. Baxter, M. Rowlson, Mater. Sci. Eng. A, 2009, vol. 513-514, pp. 366-75.10.1016/j.msea.2009.02.005 ↗
56. [56] X.Y. Wang, W.Y. Li, T.J. Ma, A. Vairis, Mater. Design, 2017, vol. 116, pp. 115-26.10.1016/j.matdes.2016.12.005 ↗
57. [57] A. Vairis, M. Frost, Mater. Sci. Eng. A, 1999, vol. 271, pp. 477-84.10.1016/S0921-5093(99)00449-9 ↗
58. [58] A. Vairis, M. Frost, Wear 1998, vol. 217, pp. 117-31.10.1016/S0043-1648(98)00145-8 ↗
59. [59] R. Turner, J.C. Gebelin, R.M. Ward, R.C. Reed, Acta Mater, 2011, vol. 59, pp. 3792-03.10.1016/j.actamat.2011.02.028 ↗
60. [60] L. Jing, R.D. Fu, Y.J. Li, Y. Shi, J. Wang, D.X. Du, Sci. Technol. Weld. Joi., 2015, vol. 20(4), pp. 286-90.10.1179/1362171815Y.0000000007 ↗
61. [61] H. Jiang, J. Dong, M. Zhang, Z. Yao, Metall. Mater. Trans A, 2016, vol. 47A, pp. 5071-87.10.1007/s11661-016-3664-7 ↗
62. [62] Y. Liu, R. Hu, J. Li, H. Kou, H. Li, H. Chang, H. Fu, Mater. Sci. Eng. A, 2008, vol. 497, pp. 283-89.10.1016/j.msea.2008.07.052 ↗
63. [63] S. Guo, D. Li, Q. Guo, Z. Wu, H. Peng, J. Hu, J. Mater. Sci., 2012, vol. 47, pp. 5867-78.10.1007/s10853-012-6488-x ↗
64. [64] K.M. Oluwasegun, J.O. Olawale, O.O. Ige, M.D. Shittu, A.A. Adeleke, B.O. Malomo, J. Mater. Eng. Perform., 2014, vol. 23(8), pp. 2834-46.10.1007/s11665-014-1067-8 ↗
65. [65] D. Zhao, J. Mater. Process. Tech., 1993, vol. 36, pp. 467-71.10.1016/0924-0136(93)90058-E ↗