journal article·2016-06Open access

Characteristics of Reactive Ni3Sn4 Formation and Growth in Ni-Sn Interlayer Systems

Adrian Lis, Christoph Kenel, Christian Leinenbach

Abstract

The near-isothermal growth and formation of Ni3Sn4 intermetallic compounds (IMC) in Ni-Sn interlayer systems was studied in the solid state at 473 K (200 °C) and under solid–liquid conditions at 523 and 573 K (250 °C and 300 °C) from an initial state of a few seconds. Scalloped solid-state IMC formation was mainly driven by grain boundary diffusion of Ni through the IMC layer combined with the grain coarsening of the IMC layer. Under solid–liquid conditions, the formation of faceted and needle-shaped Ni3Sn4 grains as well as an atypical IMC growth behavior with similar parabolic growth constants for 523 K and 573 K (250 °C and 300 °C) was observed within the first 180 seconds of the holding time, and IMC growth occurred as an isothermal solidification from the Ni-saturated Sn melt. Due to the progressive densification of the IMC layer and the diffusion-controlled growth, the kinetics slowed down by approximately one order of magnitude after 180 seconds of annealing. The final stage was characterized by the formation of IMC islands ahead of the interfacial Ni3Sn4 layer. Needle-like IMC growth was effectively suppressed under combined solid-state and solid–liquid conditions. Textured Ni3Sn4 IMC formation at the Ni-Sn interface was approved with pole figure measurements. The activation energy Q for solid–liquid IMC formation was calculated as 43.3 kJ/mol, and processing maps for IMC growth and Sn consumption were derived as functions of temperature and time, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. K. Sakuma, P.S. Andry, C.K. Tsang, S.L. Wright, B. Dang, C.S. Patel, B.C. Webb, J. Maria, E.J. Sprogis, S.K. Kang, R.J. Polastre, R.R. Horton and J.U. Knickerbocker: IBM J. Res. Dev., 2008, vol. 52, pp. 611-622.10.1147/JRD.2008.5388567 ↗
2. G.O. Cook III and C.D. Sorensen: J. Mater. Sci., 2011, vol. 46, pp. 5305-5323.10.1007/s10853-011-5561-1 ↗
3. H. Okamoto: J. Phase Equilib. Diff., 2008, vol. 29, pp. 297-298.10.1007/s11669-008-9313-0 ↗
4. D.Q. Yu, C.M.L. Wu, C.M.T. Law, L. Wang and J.K.L. Lai: J. Alloy. Compd., 2005, vol. 392, pp. 192-199.10.1016/j.jallcom.2004.09.023 ↗
5. J. Liang, N. Dariavach, P. Callahan and D. Shangguam: Mater. Trans. JIM, 2006, vol. 47, pp. 317-325.10.2320/matertrans.47.317 ↗
6. J.F. Li, S.H. Mannan, M.P. Clode, D.C. Whalley and D.A. Hutt: Acta Mater., 2006, vol. 54, pp. 2907-2922.10.1016/j.actamat.2006.02.030 ↗
7. J. Shen, Y.C. Chan and S.Y. Liu: Acta Mater., 2009, vol. 57, pp. 5196-5206.10.1016/j.actamat.2009.07.021 ↗
8. Y. Tian, J. Chow, X. Liu, Y.P. Wu and S.K. Sitaraman: J. Electron Mater., 2013, vol. 42, pp. 230-239.10.1007/s11664-012-2302-4 ↗
9. R.W. Yang, Y.W. Chang, W.C. Sung and C. Chen: Mater. Chem. Phys., 2012, vol. 134, pp. 340-344.10.1016/j.matchemphys.2012.02.074 ↗
10. M.N. Islam, Y.C. Chan, A. Sharif and M.O. Alam: Microelectron. Reliab., 2003, vol. 43, pp. 2031-2037.10.1016/S0026-2714(03)00190-2 ↗
11. M. Schaefer, R. Fournelle and J. Liang: J. Electron. Mater., 1998, vol. 27, pp. 1167-1176.10.1007/s11664-998-0066-7 ↗
12. Y.W. Lin and K.L. Lin: J. Appl. Phys., 2010, vol. 108, pp. 063536-1–063536-4.
13. H.Y. Chen and C. Chen: J. Mater. Res., 2012, vol. 27, pp. 1169-1177.10.1557/jmr.2012.22 ↗
14. R. Labie, W. Ruythooren and J. Van Humbeck: Intermetallics, 2007, vol. 15, pp. 396-403.10.1016/j.intermet.2006.08.003 ↗
15. W. Tang, A. He, Q. Liu and D.G. Ivey: Int. J. Min: Met. Mater., 2010, vol. 17, pp. 459-463.
16. M. Mita, M. Kajihara, N. Kurokawa and K. Sakamoto: Mater. Sci. Eng. A, 2005, vol. 403, pp. 269-275.10.1016/j.msea.2005.05.012 ↗
17. J.O. Suh, K.N. Tu, A.T. Wu and N. Tamura: J. Appl. Phys., 2011, vol. 109, pp. 123513-1–5.10.1063/1.3592184 ↗
18. V.I. Dybkov: Solid State Phenom., 2008, vol. 138, pp. 153-158.10.4028/www.scientific.net/SSP.138.153 ↗
19. D. Gur and M. Bamberger: Acta Metall. Mater., 1998, vol. 46, pp. 4917-4923.10.1016/S1359-6454(98)00192-X ↗
20. J. Görlich, D. Baither and G. Schmitz: Acta Mater., 2010, vol. 58, pp. 3187-3197.10.1016/j.actamat.2010.01.027 ↗
21. S. Bader, W. Gust and H. Hieber: Acta Metall. Mater., 1995, vol. 43, pp. 329-337.
22. W.K. Choi, S.Y. Jang, J.H. Kim, K.W. Paik and H.M. Lee: J. Mater. Res., 2002, vol. 17, pp. 597-599.10.1557/JMR.2002.0084 ↗
23. J.H. Kim, S.W. Jeong and H.M. Lee: Mater. Trans. JIM, 2004, vol. 45, pp. 710-713.10.2320/matertrans.45.710 ↗
24. K.A. Jackson, D.R. Uhlmann and J.D. Hunt: J. Cryst. Growth, 1967, vol. 1, pp. 1-36.10.1016/0022-0248(67)90003-6 ↗
25. A. Lis, M.S. Park, R. Arroyave and C. Leinenbach: J. Alloy. Compd., 2014, vol. 617, pp. 763-773.10.1016/j.jallcom.2014.08.082 ↗
26. M.S. Park and R. Arroyave: J. Electron. Mater., 2009, vol. 38, pp. 2525-2533.10.1007/s11664-009-0849-5 ↗
27. C.H. Ma and R.A. Swalin, Acta Metall. Mater., 1960, vol. 8, pp. 388-395.10.1016/0001-6160(60)90008-0 ↗
28. J.A. van Beek, S.S. Stolk, F.J.J. van Loo: Zeitschrift fuer Metallkunde, 1982, vol. 73, pp. 439-444.
29. A.M. Gusak and K.N. Tu: Phys. Rev. B, 2002, vol. 66, pp. 115403 1-14.10.1103/PhysRevB.66.115403 ↗
30. H. Flandorfer, U. Saeed, C. Luef, A. Sabbar and H. Ipser: Thermochim. Acta, 2007, vol. 459, pp. 34-39.10.1016/j.tca.2007.04.004 ↗
31. Y. Wang, S.H. Chae, J. Im and P.S. Ho: IEEE 63rd Electronic Components and Technology Conference (ECTC), Las Vegas, 28–31 May 2013, DOI: 10.1109/ECTC.2013.6575845, pp. 1953–1958.10.1109/ECTC.2013.6575845 ↗
32. J.W. Chan, W.B. Hillig, G.W. Sears: Acta Metall., 1964, vol. 12, pp. 1421-1439.10.1016/0001-6160(64)90130-0 ↗