Effect of Phosphorus on the Grain Boundary Cohesion and γ′ Precipitation in IN706 alloy
Source abstract
Abstract
The present paper explored the effect of P content and cooling rate on the microstructure and mechanical properties of IN706 alloy, which was related to the grain boundary cohesion and the γ′ precipitation. It was found that P was mainly dissolved in the γ matrix of IN706 alloy when solutioned at 1463 K (1190 °C), and diffused toward and segregated at grain boundaries with the drop of temperature. When dissolved in the γ matrix, P did not influence the microhardness, tensile properties, and impact toughness of IN706 alloy. When aged after 1463 K (1190 °C) solution, P increased the room-temperature yield and ultimate strength, and reduced the elongation of IN706 alloy. The results suggested that the segregation of P at the grain boundaries did not reduce the grain boundary cohesion of IN706 alloy. In addition, P facilitated the γ′ phase precipitation by reducing the mismatch lattice between γ and γ′ phases. As a result, the strength and microhardness of IN706 alloy were enhanced when the P content was increased and the cooling rate from high temperature became smaller.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. R.T. Holt and W. Wallace: Int. Met. Rev., 1976, vol. 21, pp. 1-24.10.1179/imr.1976.21.1.1 ↗
2. J.R. Rice and J.S. Wang: Mater. Sci. Eng. A, 1989, vol. 107, pp. 23-40.10.1016/0921-5093(89)90372-9 ↗
3. G.S. Was and R.M. Kruger: Acta Metall., 1985, vol. 33 (5), pp. 841-54.10.1016/0001-6160(85)90108-7 ↗
4. J.K. Sung and G.S. Was: Corrosion, 1991, vol. 47 (11), pp. 824-34.10.5006/1.3585194 ↗
5. G.S. Was, J.K. Sung, and T.M. Angeliu: Metall. Trans. A, 1992, vol. 23A (12), pp. 3343-59.10.1007/BF02663444 ↗
6. W.R. Sun: Master Dissertation, Institute of Metal Research, Chines Academy of Sciences, 1993.
7. W.R. Sun: Doctor Dissertation, Institute of Metal Research, Chines Academy of Sciences, 1996.
8. W.R. Sun, S.R. Guo, D.Z. Lu, and Z.Q. Hu: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 649-54.10.1007/s11661-997-0050-5 ↗
9. W.D. Cao and R.L. Kennedy: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, 1994, pp. 463–77.10.7449/1994/Superalloys_1994_463_477 ↗
10. W.R. Sun, S.R. Guo, J.H. Lee, N.K. Park, Y.S. Yoo, S.J. Choe and Z.Q. Hu: Mater. Sci. Eng. A, 1998, vol. 247, pp. 173-79.10.1016/S0921-5093(97)00753-3 ↗
11. X.B. Liu, J.X. Dong, B. Tang, Y.H. Hu, and X.S. Xie: Mater. Sci. Eng. A, 1999, vol. 270, pp. 190-96.10.1016/S0921-5093(99)00153-7 ↗
12. M.Q. Wang, J.H. Du, Q. Deng, Z.L. Tian, and J. Zhu: Mater. Sci. Eng. A, 2015, vol. 626, pp. 382-89.10.1016/j.msea.2014.12.094 ↗
13. E.D. Hondros and M.P. Seah: Int. Met. Rev., 1977, vol. 22, pp. 262-301.10.1179/imr.1977.22.1.262 ↗
14. L. Zheng, T.D. Xu, Q. Deng, and J.X. Dong: Mater. Lett., 2008, vol. 62, pp. 54-56.10.1016/j.matlet.2007.04.082 ↗
15. J.X. Dong, M.C. Zhang, X.S. Xie, and R.G. Thompson: Mater. Sci. Eng. A, 2003, vol. 328, pp. 8-13.10.1016/S0921-5093(01)01491-5 ↗
16. [16] R. Ding: Mate. Sci. Tech., 2010, vol. 26 (1), pp. 36-40.10.1179/174328408X385836 ↗
17. M.P. Seah: Surf. Sci., 1975, vol. 53, pp. 168-212.10.1016/0039-6028(75)90124-7 ↗
18. R.A. Mulford, C.J. Mcmahon, D.P. Pope, and H.C. Feng: Metall. Trans. A, 1976, vol. 7A, pp. 1183-95.10.1007/BF02656602 ↗
19. M.P. Seah: Proc. R. Soc. Lond. A, 1976, vol. 349, pp. 535-54.10.1098/rspa.1976.0088 ↗
20. S.H. Song, J. Wu, L.Q. Weng, and Z.X. Yuan: Mater. Sci. Eng. A, 2008, vol. 497, pp. 524-27.10.1016/j.msea.2008.07.036 ↗
21. W.D. Cao and R.L. Kennedy: Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetal, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, 1996, pp. 589–97.10.7449/1996/Superalloys_1996_589_597 ↗
22. P.W. Schilke, J.J. Pepe, and R.C. Schwant: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, 1994, pp. 1–12.10.7449/1994/Superalloys_1994_1_12 ↗
23. J.P. Fesland and P. Petit: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, 1994, pp. 229–38.10.7449/1994/Superalloys_1994_229_238 ↗
24. V. Kindrachuk, N. Wanderka, J. Banhart, D. Mukherji, D. Del Genovese, and J. Rösler: Acta Mater., 2008, vol. 56, pp. 1609-18.10.1016/j.actamat.2007.12.010 ↗
25. D. Mukherji, P. Strunz, D. DelGenovese, R. Gilles, J. Rösler, and A. Wiedenmann: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2781-92.10.1007/s11661-003-0179-9 ↗
26. D. Mukherji, R. Gilles, B. Barbier, D. DelGenovese, B. Hasse, P. Strunz, T. Wroblewski, H. Fuess, and J. Rösler: Scripta Mater., 2003, vol. 48, pp. 333-39.10.1016/S1359-6462(02)00456-6 ↗
27. J. Rösler, S. Müller, D. Del Genovese, and M. Götting: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, 2001, pp. 523–34.10.7449/2001/Superalloys_2001_523_534 ↗
28. K.A. Heck: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, 1994, pp. 393–404.10.7449/1994/Superalloys_1994_393_404 ↗
29. X. Xin: Doctor Dissertation, Northeastern University, 2010.
30. X.L. Song, Z.X. Yuan, J. Jia, D. Wang and L.X. Fan: Scripta Mater., 2010, vol. 63, pp. 446-48.10.1016/j.scriptamat.2010.05.001 ↗
31. V.K. Pecharsky and P.Y. Zavalij: Fundamentals of Powder Diffraction and Structural Characterization of Materials, 2st ed., p. 144, Springer Science+Business Media, Inc., USA, 2004.
32. R. Vincent: Acta Metall., 1985, vol. 33, pp. 1205-16.10.1016/0001-6160(85)90231-7 ↗
33. R. Nakkalil, N.L. Richards, and M.C. Chaturvedi: Mater. Sci. Eng. A, 1992, vol. 157, pp. 89-100.10.1016/0921-5093(92)90102-7 ↗
34. C.T. Liu, C.L. White, and J.A. Horton: Acta Metall., 1985, vol. 33, pp. 213-29.10.1016/0001-6160(85)90139-7 ↗
35. W.G. Liu, C.L. Ren, H. Han, J. Tan, Y. Zou, X.T. Zhou, P. Huai, and H.J. Xu: J. Appl. Phys, 2014, vol. 115, pp. 043706.10.1063/1.4863181 ↗