Evolution of Intermetallic Phases in Soldering of the Die Casting of Aluminum Alloys
Source abstract
Abstract
Most die failures are resulted from chemical reactions of dies and molten aluminum in the die casting of aluminum. The formation of intermetallic phases between a steel die and molten aluminum is investigated by stationary immersion tests and compared to a real die casting process. Three intermetallic phases are identified in the stationary immersion tests: a composite layer and two compact layers. The composite layer is a mixture of α bcc, Al, and Si phases. The α bcc phase changes in morphology from rod-like to spherical shape, while the growth rate of the layer changes from parabolic to linear pattern with immersion time. The first compact layer forms rapidly after immersion and maintains a relatively constant thickness. The second compact layer forms after 4 hours of immersion and exhibits parabolic growth with immersion time. In comparison, only a composite layer and the first compact layer are observed in a real die casting process. The fresh molten aluminum of high growth rate washes away the second intermetallic layer easily.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. [1] Z.W. Chen, D.T. Fraser, M.Z. Jahedi, Mater. Sci. Eng., A, 260 (1999) 188-196.10.1016/S0921-5093(98)00963-0 ↗
2. [2] K.A. Nazari, S.G. Shabestari, J. Alloys Compd., 478 (2009) 523-530.10.1016/j.jallcom.2008.11.127 ↗
3. [3] T.-S. Shih, S.-H. Tu, Mater. Sci. Eng., A, 454–455 (2007) 349-356.10.1016/j.msea.2006.11.017 ↗
4. [4] A. Bouayad, C. Gerometta, A. Belkebir, A. Ambari, Mat Sci Eng a-Struct, 363 (2003) 53-61.10.1016/S0921-5093(03)00469-6 ↗
5. [5] K. Bouche, F. Barbier, A. Coulet, Mat Sci Eng a-Struct, 249 (1998) 167-175.10.1016/S0921-5093(98)00573-5 ↗
6. [6] S. Kobayashi, T. Yakou, Mater. Sci. Eng., A, 338 (2002) 44-53.10.1016/S0921-5093(02)00053-9 ↗
7. [7] Y. Tanaka, M. Kajihara, Mater Trans, 50 (2009) 2212-2220.10.2320/matertrans.M2009128 ↗
8. [8] V.N. Yeremenko, Y.V. Natanzon, V.I. Dybkov, J Mater Sci, 16 (1981) 1748-1756.10.1007/BF00540620 ↗
9. [9] W.J. Cheng, C.J. Wang, Surf Coat Tech, 204 (2009) 824-828.10.1016/j.surfcoat.2009.09.061 ↗
10. [10] A. Coulet, K. Bouche, F. Marinelli, F. Barbier, J Appl Phys, 82 (1997) 6001-6007.10.1063/1.366465 ↗
11. [11] V.I. Dybkov, J Mater Sci, 21 (1986) 3085-3090.10.1007/BF00553340 ↗
12. [12] V.I. Dybkov, J Mater Sci, 21 (1986) 3078-3084.10.1007/BF00553339 ↗
13. [13] G. Eggeler, W. Auer, H. Kaesche, J Mater Sci, 21 (1986) 3348-3350.10.1007/BF00553379 ↗
14. [14] G.V. Kidson, J Nucl Mater, 3 (1961) 21-29.10.1016/0022-3115(61)90175-1 ↗
15. [15] J.E. Nicholls, Anti-Corrosion Methods and Materials, 11 (1964) 16-21.10.1108/eb020226 ↗
16. [16] G. Pasche, M. Scheel, R. Schäublin, C. Hébert, M. Rappaz, A. Hessler-Wyser, Metall and Mat Trans A, 44 (2013) 4119-23.10.1007/s11661-013-1788-6 ↗
17. [17] S.R. Shatynski, J.P. Hirth, R.A. Rapp, Acta Metallurgica, 24 (1976) 1071-1078.10.1016/0001-6160(76)90023-7 ↗
18. [18] S. Shankar, D. Apelian, Metall Mater Trans B, 33 (2002) 465-76.10.1007/s11663-002-0057-7 ↗
19. [19] J. Song, T. DenOuden, Q. Han, Metall and Mat Trans A, 43 (2012) 415-421.10.1007/s11661-011-0865-y ↗
20. [20] S. Shankar, D. Apelian, JOM, 54 (2002) 47-54.10.1007/BF02711867 ↗