Displacive Phase Transformation and Surface Effects Associated with Confocal Laser Scanning Microscopy
Source abstract
Abstract
The influence of the free surface on martensitic transformation was examined by comparing the highest temperature at which martensite forms (MS), as measured using dilatometry, with surface observations using confocal laser scanning microscopy. It is found that the proximity of the surface during confocal microscopy permits martensitic transformation to occur at a higher temperature with a reduced free energy change. This is because the strain energy from the shape deformation accompanying the growth of martensite is reduced at a free surface. The second observation is that plates of martensite tend to coalesce as they approach the free surface where there is reduced constraint. The general observations are backed by calculating the strain energy caused by a subsurface edge dislocation as a function of the orientation of its Burgers vector relative to the free surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Y. Komizo, H. Terasaki, and T. Osuki: Weld. World, 2008, vol. 52, pp. 56–63.10.1007/BF03266641 ↗
2. H.K.D.H. Bhadeshia: Bainite in Steels, 2nd ed., Institute of Materials, London, U.K., 2001.
3. J.W. Christian: Acta Metall., 1958, vol. 6, pp. 377–79.10.1016/0001-6160(58)90077-4 ↗
4. J.W. Christian: Int. Conf. Martensitic Transform. ICOMAT ’79, G.B. Olson and M. Cohen, eds., 1979, pp. 220–34.
5. D. Zhang, H. Terasaki, and Y. Komizo: Microsc. Res. Tech.., 2010, vol. 73, pp. 67–70.10.1002/jemt.20836 ↗
6. T. Shirane, S. Tsukamoto, K. Tsuzaki, Y. Adachi, T. Hanamura, M. Shimizu, and F. Abe: Sci. Technol. Weld. Joi., 2009, vol. 14, pp. 698–707.10.1179/136217109X12505932584853 ↗
7. K.K. Wakasa and C.M. Wayman: Scripta Metall., 1979, vol. 13, pp. 1163–66.10.1016/0036-9748(79)90275-8 ↗
8. J.A. Klostermann and W.G. Burgers: Acta Metall., 1964, vol. 12, pp. 355–60.10.1016/0001-6160(64)90004-5 ↗
9. B.C. Odegard: Metallography, 1974, vol. 7, pp. 129–35.10.1016/0026-0800(74)90002-0 ↗
10. J.H. Pak, H.K.D.H. Bhadeshia, L. Karlsson, and E. Keehan: Sci. Technol. Weld. Joi., 2008, vol. 13, pp. 593–97.10.1179/136217108X338926 ↗
11. H. Chikama, H. Shibata, T. Emi, and M. Suzuki: Mater. T. JIM, 1996, vol. 37, pp. 620–26.10.2320/matertrans1989.37.620 ↗
12. H.-S. Yang and H.K.D.H. Bhadeshia: Mater. Sci. Tech., 2007, vol. 23, pp. 556–60.10.1179/174328407X176857 ↗
13. T. Okumura: MAP STEEL MTTTDATA, http://www.msm.cam.ac.uk/map/steel/programs/MTTTDATA.html.
14. NPL: MTDATA Software, National Physical Laboratory, Teddington, U.K., 2006.
15. A.K. Head: P. Phys. Soc., 1953, vol. 66B, pp. 793–801.10.1088/0370-1301/66/9/309 ↗
16. J.P. Hirth and J. Lothe: Theory of Dislocations, Krieger Publishing Company, New York, 1992.
17. F.R.N. Nabarro: Dislocations in Solids: Dislocations in Crystals, North Holland, The Netherlands, 1979.
18. H.K.D.H. Bhadeshia and R.W.K. Honeycombe: Steels: Microstructure and Properties, 3rd ed., Butterworth-Heinemann, London, U.K., 2006.