Effect of plastic anisotropy on the creep strength of single crystals of a nickel-based superalloy
Source abstract
Abstract
The effect of plastic anisotropy, which is caused by the arrangement of slip systems, on the creep strength of notched specimens of Ni-based superalloy single crystals, is described. It was revealed that the creep strength of the notched specimens was affected by the crystallographic orientation, not only in the tensile direction, but also in the thickness direction. The creep strength was superior in the notched specimen with the [011] tensile and [100] plate-normal orientation, whereas the notched specimen with [011] tensile and [100] plate-normal orientation exhibited extremely poor creep strength. In the case of specimens whose tensile orientation was [011], results of the creep-rupture tests at 973 K were in agreement with the assumption of the operation of {111}〈112〉 slip systems. The creep strength in the notched specimen with [001] tensile and [100] plate-normal orientations was superior to that in the notched specimen with [001] tensile and [011] plate-normal orientations. When the tensile orientation was [001], the results of the creep-rupture tests were in agreement with the assumption of the operation of {111}〈112〉 slip systems during primary creep region and {111}〈101〉 slip systems during secondary creep region.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. M.B. Henderson and J.W. Martin: Acta Metall. Mater., 1996, vol. 44, pp. 111–26.10.1016/1359-6454(95)00147-9 ↗
2. V. Sass, U. Glatzel, and M. Feller-Kniepmeier: Acta Metall. Mater., 1996, vol. 44, pp. 1967–77.10.1016/1359-6454(95)00315-0 ↗
3. V. Sass, U. Glatzel, and M. Feller-Kniepmeier: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS-AIME, Warrendale, PA, 1996, pp. 283–90.
4. P. Caron, Y. Ohta, Y.G. Nakagawa, and T. Khan: in Superalloys 1988, D.N. Duhl, G. Maurer, S. Antolovich, C. Lund, and S. Reichman, eds., TMS-AIME, Warrendale, PA, 1988, pp. 215–24.
5. K. Sugimoto, T. Sakaki, T. Horie, K. Kuramoto, and O. Miyagawa: Metall. Trans. A, 1985, 16A, pp. 1457–66.10.1007/BF02658678 ↗
6. K. Kakehi: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1249–59.10.1007/s11661-999-0274-7 ↗
7. G.R. Leverant and B.H. Kear: Metall. Trans., 1970, vol. 1, pp. 491–98.10.1007/BF02811560 ↗
8. R.A. MacKay and R.D. Maier: Metall. Trans. A, 1982, vol. 13A, pp. 1747–54.10.1007/BF02647830 ↗
9. P. Caron and T. Khan: Strength of Metals and Alloys, Pergamon Press, Elmsford, NY, 1989, pp. 893–98.10.1016/B978-0-08-034804-9.50140-6 ↗
10. T. Khan and P. Caron: Mater. Sci. Technol., 1986, vol. 2, pp. 486–92.10.1179/mst.1986.2.5.486 ↗
11. B.H. Kear: in Order-Disorder Transformations in Alloys, H. Warlimont, ed., Springer-Verlag, Berlin, pp. 440–74.
12. G.R. Leverant, B.H. Kear, and J.M. Oblak: Metall. Trans., 1973, vol. 4, pp. 355–62.10.1007/BF02649637 ↗
13. T. Link and M. Feller-Kniepmeier: Metall. Trans. A., 1992, vol. 23A, pp. 99–105.10.1007/BF02660857 ↗
14. G.T. Hahn and A.R. Rosenfield: Acta Metall., 1965, vol. 13, pp. 293–306.10.1016/0001-6160(65)90206-3 ↗
15. T.M. Pollock and A.S. Argon: Acta Metall. Mater., 1992, vol. 40, pp. 1–30.10.1016/0956-7151(92)90195-K ↗