journal article·2002-05

An integrated computer model with applications for austenite-to-ferrite transformation during hot deformation of Nb-microalloyed steels

Janusz Majta, Maciej Pietrzyk, Anna K. Zurek, Mark Cola, Pat Hochanadel

Publisher page

Abstract

This work presents an austenite decomposition model, based on the thermodynamics of the system and diffusion-controlled nucleation theory, to predict the evolution of microstructure during hot working of niobium-microalloyed steels. The differences in microstructural development of hotdeformed microalloyed steel in the single-phase austenite and two-phase (austenite + ferrite) regions have been effectively described using an integrated computer modeling process. The complete model presented here takes into account the kinetics of recrystallization, recrystallized austenite grain size, precipitation, phase transformation, and the resulting ferrite structure. After considering existing austenite decomposition models, we decided that the method adopted in the present work relies on isothermal transformation kinetics and the principle-of-additivity rule. The thermomechanical part of the modeling process was carried out using the finite-element method. Experimental results at different temperatures, strain rates, and strain levels were obtained using a Gleeble thermomechanical simulator. A comparison of results of the model with experiments shows good agreement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. C.M. Sellars and J.H. Beynon: in High Strength Low Alloy Steels, D.P. Dunne and T. Chandra, eds., University of Wollongong, Wollongong, NSW, 1984, pp. 142–50.
2. P.C. Campbell, E.B. Hawbolt, and J.K. Brimacombe: Metall. Trans. A, 1991, vol. 22A, pp. 2791–2805.10.1007/BF02851373 ↗
3. J.S. Kirkaldy: Metall. Trans., 1973, vol. 4, pp. 2327–33.10.1007/BF02669371 ↗
4. M. Suehiro, H. Yada, T. Senuma, and K. Sato: Proc. Int. Conf. Mathematical Modeling of Hot Rolling of Steel, S. Yue, ed., CIMM, Hamilton, 1990, pp. 128–37.
5. M. Suehiro, T. Senuma, and H. Yada: Tetsu-to-Hagane, 1987, vol. 73, pp. 1026–32.10.2355/tetsutohagane1955.73.8_1026 ↗
6. T. Senuma, M. Suehiro, and H. Yada: Iron Steel Inst. Jpn. Int., 1992, vol. 32 (3), pp. 423–32.10.2355/isijinternational.32.423 ↗
7. S. Torizuka, N. Ohkouchi, T. Minote, M. Niikura, and C. Ouchi: Thermomechanical Processing in Theory, Modelling & Practice, B. Hutchinson, M. Andersson, G. Engberg, B. Karlsson, and T. Siwecki, eds., Sweden, 1996, pp. 227–39.
8. Yoshie, M. Fujioka, Y. Watanabe, K. Nishioka, and H. Morikawa: Iron Steel Inst. Jpn. Int., 1992, vol. 32 (3), pp. 395–404.10.2355/isijinternational.32.395 ↗
9. P. Choquet, P. Fareque, J. Giusti, B. Chamont, J.N. Pezant, and F. Blanchet: Mathematical Modeling of Hot Rolling of Steel, S. Yue, ed., CIMM, Hamilton, Canada, 1990, pp. 34–44.
10. S. Kamamoto, T. Nishimori, and S. Kinoshita: Mater. Sci. Technol., 1985, vol. 1, pp. 798–804.10.1179/mst.1985.1.10.798 ↗
11. I. Boyadjiev, P.F. Thomson, and Y.C. Lam: THERMEC 97, T. Chandra and T. Sakai, eds., TMS, Warrendale, PA, 1997, pp. 2023–29.
12. I. Boyadjiev, P.F. Thomson, and Y.C. Lam: Iron Steel Inst. Jpn. Int., 1996, vol. 36 (11), pp. 1413–19.10.2355/isijinternational.36.1413 ↗
13. M. Umemoto, A. Hiramatsu, A. Moriya, T. Watanabe, S. Nanba, N. Nakajjima, G. Anan, and Y. Higo: Iron Steel Inst. Jpn. Int., 1992, vol. 32 (3), pp. 306–15.10.2355/isijinternational.32.306 ↗
14. M. Umemoto: Proc. Int. Symp. Mathematical Modeling of Hot Rolling of Steel, S. Yue, ed., CIMM, Hamilton, 1990, pp. 404–12.
15. M. Umemoto, N. Komatsubara, and I. Tamura: J. Heat Treating, vol. 1, 1980, pp. 57–64.10.1007/BF02833039 ↗
16. C. Ouchi, T. Sampei, and I. Kozasu: Trans. Iron Steel Inst. Jpn., 1982, vol. 22, pp. 214–22.10.2355/isijinternational1966.22.214 ↗
17. M. Piette and C. Perdrix: Mater. Sci. Forum, 1998, vol. 284–86, 361–68.10.4028/www.scientific.net/MSF.284-286.361 ↗
18. J. Majta, A.K. Zurek, and M. Pietrzyk: Recrystallization ’99, JIMIS-10, Tsukuba Science City, Japan, 1999, pp. 691–96.
19. T. Tanaka: Int. Met. Rev., 1981, vol. 4, pp. 185–212.
20. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, 1997.
21. J.L. Lee, C.C. Yang, and I.C. Hsuan: THERMEC 97, T. Chandra and T. Sakai, eds., TMS, Warrendale, PA, 1997, pp. 451–57.
22. M. Militzer, W.P. Sun, W.J. Poole, and P. Purtscher: THERMEC 97, T. Chandra and T. Sakai, eds., TMS, Warrendale, PA, 1997, pp. 2093–99.
23. T. Tanaka and N. Tabata: Tetsu-to-Hagane, 1978, vol. 64, pp. 1353–62.10.2355/tetsutohagane1955.64.9_1353 ↗
24. J. Majta, A.K. Zurek, and M. Pietrzyk: J. Phys. IV France, 1997, vol. 7 (C3), pp. 397–402.10.1051/jp4:1997369 ↗
25. A.K. Zurek and J. Majta: 7th Int. Symp. on Plasticity and Current Applications, Cancun, Mexico, 1999, pp. 659–62.
26. M. Umemoto, N. Komatsubara, and I. Tamura: J. Heat Treating, 1980, vol. 1 (3), pp. 57–64.10.1007/BF02833039 ↗
27. M. Umemoto, K. Horiuchi, and I. Tamura: Trans. Iron Steel Inst. Jpn., 1982, vol. 22, pp. 854–61.10.2355/isijinternational1966.22.854 ↗
28. J.W. Cahn and W.C. Hagel: Acta Metall., 1963, vol. 11, p. 561.10.1016/0001-6160(63)90090-7 ↗
29. I. Tamura: Trans. Iron Steel Inst. Jpn., 1987, vol. 27, pp. 763–79.10.2355/isijinternational1966.27.763 ↗
30. P.C. Campbell, E.B. Hawbolt, and J.K. Brimacombe: Metall. Trans. A, 1991, vol. 22A, pp. 2791–805.10.1007/BF02851373 ↗
31. P.C. Campbell, E.B. Hawbolt, and J.K. Brimacombe: Metall. Trans. A, 1991, vol. 22A, pp. 2779–90.10.1007/BF02851372 ↗
32. M.B. Kuban, R. Jayaraman, E.B. Hawbolt, and J.K. Brimacombe: Metall. Trans. A, 1986, vol. 17A, pp. 1493–1503.10.1007/BF02650085 ↗
33. E.B. Hawbolt, B. Chau, and J.K. Brimacombe: Metall. Trans. A, 1985, vol. 16A, pp. 565–78.10.1007/BF02814230 ↗
34. J.W. Christian: The Theory of Transformations in Metals and Alloys, Pergamon Press, Oxford, United Kingdom, 1965, vol. 21, pp. 471–95.
35. J. Majta, J.G. Lenard, and M. Pietrzyk: Metall. Foundry Eng., 1995, vol. 21, pp. 9–37.
36. J. Majta, J.G. Lenard, and M. Pietrzyk: Mater. Sci. Eng., 1996, vol. 208, pp. 249–59.10.1016/0921-5093(95)10050-4 ↗
37. I.A. Wierszyllowski: Metall. Trans. A, 1991, vol. 22A, pp. 993–99.10.1007/BF02661092 ↗
38. C. Zener: Trans. AIME, 1946, vol. 167, pp. 550–95.
39. J.J. Eber and W. Bleck: Proc. Modeling of Metal Rolling Processes, J.H. Beynon, P. Ingham, H. Teichert, and K. Waterson, eds., The Institute of Materials, London, 1996, pp. 185–90.
40. G.P. Krielaart, C.M. Brakman, and S. Van der Zwaag: J. Mater. Sci., 1996, vol. 31, pp. 1501–08.10.1007/BF00357859 ↗
41. C.H. Lee and S. Kobayashi: ASME, J. Eng. Ind., 1973, vol. 95, pp. 63–78.
42. M. Pietrzyk and J.G. Lenard: Thermal Mechanical Modeling of the Flat Rolling Process, Springer-Verlag, Berlin, 1991.10.1007/978-3-642-84325-9 ↗
43. J. Majta, R. Kuziak, and M. Pietrzyk: J. Mater. Processing Technol., 1998, vol. 80–81, 524–30.10.1016/S0924-0136(98)00156-3 ↗
44. A.K. Zurek, J. Majta, and M. Pietryzk: 39th Mechanical Working and Steel Processing Conf., Conf. Proc. ISS, (ISS, Indianapolis, IN, 1998), vol. XXXV, pp. 577–82.
45. J. Majta, M. Pietrzyk, J.G. Lenard, and J. Jansen: 37th Mechanical Working and Steel Processing Conf., ISS, Hamilton, Canada, 1995, vol. XXXIII, pp. 89–99.
46. J. Majta, P. Munther, J.G. Lenard, Z. Kedzierski, and M. Pietrzyk: 5th ICTP, Columbus, Ohio, USA, 1996, pp. 19–22.
47. K.J. Lee, K.B. Kang, J.K. Lee, O. Kwon, and R.W. Chang: Proc. Int. Symp. Mathematical Modeling of Hot Rolling of Steel, S. Yue, ed., CIMM, Hamilton, Canada, 1990, pp. 435–43.