Kinetics of Uniaxial Tensile Flow and Work Hardening Behavior of Type 316L(N) Austenitic Stainless Steel in the Framework of Two-Internal-Variable Approach
Source abstract
Abstract
Uniaxial tensile flow and work hardening behavior of type 316L(N) austenitic stainless steel have been examined in the framework of two-internal-variable approach based on the evolution of forest dislocation density and mean free path with plastic strain in the temperature range from 300 K to 1023 K (27 °C to 750 °C) and strain rates ranging from 3.16 × 10−5 to 3.16 × 10−3 s−1. The steel exhibited three-stage work hardening behavior in the variations of θσ d with σ d, where θσ d is the product of instantaneous work hardening rate, θ (θ = dσ d/de p) and flow stress contribution from dislocation (σ d), and e p is the true plastic strain. The three-stage work hardening was characterized by a gradual increase in θσ d at low stresses (transient stage) followed by a linear increase in θσ d in stage-II and inverted parabolic hardening at high σ d in stage-III. At all the strain rate and temperature conditions, the flow and work hardening behavior was appropriately described by the two-internal-variable model. The work hardening parameters such as dynamic recovery parameter and final mean free path, and the predicted forest, mobile, and total dislocation densities at uniform plastic strain exhibited three distinct temperature regimes. Anomalous variations in the work hardening parameters with respect to temperature and strain rate observed at intermediate temperatures have been ascribed to the occurrence of dynamic strain aging. At high temperatures, dominance of dynamic recovery has been observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. S.L. Mannan, S.C. Chetal, B. Raj, and S.B. Bhoje: Trans. Indian Inst. Met., 2003, vol. 56, pp. 155-78.
2. L.A. Norstrom: Metal Sci., 1997, vol. 11, pp. 208-212.10.1179/msc.1977.11.6.208 ↗
3. W.S. Ryu, D.W. Kim, W.G. Kim, and H.H. Kuk: Trans. 15th International Conference on Structural Mechanics in Reactor Technology (SMIRT-15), Seoul, Korea, 1999, pp. X-275-82.
4. V. Ganesan, M.D. Mathew, and K.B.S. Rao: Mater. Sci. Technol., 2009, vol. 25, pp. 614-18.10.1179/174328408X317066 ↗
5. M.D. Mathew, K. Laha, and V. Ganeshan: Mater. Sci. Eng. A, 1012, vol. 535, pp. 76–83.10.1016/j.msea.2011.12.044 ↗
6. K. Farrell and T.S. Byun: J. Nucl. Mater., 2001, vol. 296, pp. 129-38.10.1016/S0022-3115(01)00515-3 ↗
7. T.S. Byun, K. Farrell, E.H. Lee, L.K. Mansur, S.A. Maloy, M.R. James, and W.R. Johnson: J. Nucl. Mater., 2002, vol. 303, pp. 34-43.10.1016/S0022-3115(02)00806-1 ↗
8. P. Ludwik: Elements der technologischen Mechanik, Springer, Leipzig, 1909.10.1007/978-3-662-40293-1 ↗
9. J.H. Hollomon: Trans. AIME, 1945, vol. 162, pp. 268-90.
10. E. Voce: J. Inst. Met., 1948, vol. 74, pp. 537-62.
11. H.W. Swift: J. Mech. Phys. Solids, 1952, vol. 1, pp. 1-18.10.1016/0022-5096(52)90002-1 ↗
12. E. Voce: Metallurgia, 1955, vol. 51, pp. 219-26.
13. D.C. Ludwigson: Metall. Trans., 1971, vol. 2, pp. 2825-8.10.1007/BF02813258 ↗
14. U.F. Kocks: J. Eng. Mater. Technol., 1976, vol. 98, pp. 76-85.10.1115/1.3443340 ↗
15. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865-77.10.1016/0001-6160(81)90112-7 ↗
16. Y. Estrin and H. Mecking: Acta Metall., 1984, vol. 32, pp. 57-70.10.1016/0001-6160(84)90202-5 ↗
17. U.F. Kocks and H. Mecking: Prog. Mater. Sci., 2003, vol. 48, pp. 171-273.10.1016/S0079-6425(02)00003-8 ↗
18. Y. Estrin and L.P. Kubin: Acta Metall., 1986, vol. 34, pp. 2455-64.10.1016/0001-6160(86)90148-3 ↗
19. Y. Estrin: in Unified Constitutive Laws of Plastic deformation, A.S. Krausz and K. Krausz, eds., Academic Press, San Diego, 1996, pp. 69–106.10.1016/B978-012425970-6/50003-5 ↗
20. Y. Estrin, H. Braasch, and Y. Brechet: J. Eng. Mater. Technol., 1986, vol. 118, pp. 441-7.10.1115/1.2805940 ↗
21. F. Barlat, M.V. Glazov, J.C. Brem, and D.J. Lege: Int. J. Plasticity, 2002, vol. 18, pp. 919-39.10.1016/S0749-6419(01)00015-8 ↗
22. W. Roberts and Y. Bergstrom: Acta Metall., 1973, vol. 21, pp. 457-69.10.1016/0001-6160(73)90203-4 ↗
23. C.S. Pande: Mater. Sci. Eng. A, 2001, vol. 309-310, pp. 328-30.10.1016/S0921-5093(00)01707-X ↗
24. F. Roters, D. Raabe, and G. Gottstein: Acta Mater., 2000, vol. 48, pp. 4181-9.10.1016/S1359-6454(00)00289-5 ↗
25. D.J. Michel, J. Moteff, and A.J. Lovell: Acta Metall., 1973, vol. 21, pp. 1269-77.10.1016/0001-6160(73)90168-5 ↗
26. B.P. Kashyap, K. McTaggart, and K. Tangri: Philos. Mag. A, 1988, vol. 57, pp. 97-114.10.1080/01418618808204501 ↗
27. B.P. Kashyap: Acta Mater., 2002, vol. 50, pp. 2413-27.10.1016/S1359-6454(02)00073-3 ↗
28. B.K. Choudhary: Metall. Mater. Trans. A, 2014, vol. 45, pp. 302-16.10.1007/s11661-013-1978-2 ↗
29. ASTM E 21-09: “Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials”. ASTM Standards, West Conshohocken, PA, 2009.
30. ASTM E8/E8M -13a: “Standard Test Methods for Tension Testing of Metallic Materials”. ASTM Standards, West Conshohocken, PA, 2013.
31. ASTM E 1012-12: “Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application”. ASTM Standards, West Conshohocken, PA, 2013.
32. E. Pink and A. Grinberg: Mater. Sci. Eng., 1981, vol. 51, pp. 1-8.10.1016/0025-5416(81)90099-9 ↗
33. P. Rodriguez: Bull. Mater. Sci., 1984, vol. 6, pp. 653-63.10.1007/BF02743993 ↗
34. J. Nocedal and S.J. Wright: Numerical Optimization, Springer Series in Operations Research. Springer, New York, 2006.
35. Y. Bergström and H. Hallén: Mater. Sci. Eng., 1982, vol. 55, pp. 49-61.10.1016/0025-5416(82)90083-0 ↗
36. H. Hallén: Mater. Sci. Eng., 1985, vol. 72, pp. 119-23.10.1016/0025-5416(85)90150-8 ↗
37. J Christopher and B K Choudhary: Philos. Mag. 2014, vol. 94, pp. 2992-3016.10.1080/14786435.2014.944608 ↗
38. H.J. Frost and M.F. Ashby: In Deformation Mechanism Maps, Pergamon Press, Oxford, 1982, p. 62.
39. B.K. Choudhary: Mater. Sci. Eng. A, 2014, vol. 603, pp. 160-8.10.1016/j.msea.2014.02.083 ↗
40. X. Feaugas: Acta Mater., 1999, vol. 47, pp. 3617-32.10.1016/S1359-6454(99)00222-0 ↗
41. C. Keller, E. Hug, and X. Feaugas: Int. J. Plasticity, 2011, vol. 27, pp. 635-54.10.1016/j.ijplas.2010.08.002 ↗
42. P. Franciosi, M. Berveiller, and A. Zaoui: Acta Metall., 1980, vol. 28, pp. 273-83.10.1016/0001-6160(80)90162-5 ↗
43. P. Franciosi: Acta Metall., 1985, vol. 33, pp. 1601-12.10.1016/0001-6160(85)90154-3 ↗
44. L.P. Kubin and Y. Estrin: Revue. Phys. Appl., 1988, vol. 23, pp. 573-83.10.1051/rphysap:01988002304057300 ↗
45. L.P. Kubin and Y. Estrin: Acta Metall. Mater., 1990, vol. 38, pp. 697-708.10.1016/0956-7151(90)90021-8 ↗
46. G. Ananthakrishna: Phys. Rep., 2007, vol. 440, pp. 113–259.10.1016/j.physrep.2006.10.003 ↗
47. R.E. Stoltz and J.B. Vander Sande: Metall. Trans. A, 1980, vol. 11, pp. 1033-7.10.1007/BF02654717 ↗
48. P. Mullner, C. Solenthaler, P. Uggowitzer, and M.O. Speidel: Mater. Sci. Eng. A, 1993, vol. 164, pp. 164-169.10.1016/0921-5093(93)90655-X ↗
49. Y. Kaneko, K. Kaneko, A. Nohara, and H. Saka: Philos. Mag. A, 1995, vol. 71, pp. 399-407.10.1080/01418619508244364 ↗
50. G.W. Han, I.P. Jones, and R.E. Smallman: Acta Mater., 2003, vol. 51, pp. 2731-42.10.1016/S1359-6454(02)00359-2 ↗
51. M. Fujita, Y. Kaneko, A. Nohara, H. Saka, R. Zauter, and H. Mughrabi: ISIJ Int., 1994, vol. 34, pp. 697-703.10.2355/isijinternational.34.697 ↗
52. O.D. Sherby, R.A. Anderson, and J.E. Dorn: J. Metals, 1951, vol. 3, pp. 643-52.
53. J.G. Morris: Mater. Sci. Eng., 1974, vol. 13, pp. 101-8.10.1016/0025-5416(74)90177-3 ↗
54. W. Karlsen, M. Ivanchenko, U. Ehrnsten, Y. Yagodzinskyy, and H. Hanninen: J. Nucl. Mater., 2009, vol. 395, pp. 156-61.10.1016/j.jnucmat.2009.10.047 ↗
55. A.K. Roy, J. Pal, and C. Mukhopadhyay: Mater. Sci. Eng. A, 2008, vol. 474, pp. 363-70.10.1016/j.msea.2007.05.056 ↗
56. A.K. Roy, P. Kumar, and D. Maitra: Mater. Sci. Eng. A, 2009, vol. 499, pp. 379-86.10.1016/j.msea.2008.08.027 ↗
57. B.K. Choudhary and J. Christopher: Metall. Mater. Trans. A, 2013, vol. 44, pp. 4968-78.10.1007/s11661-013-1873-x ↗
58. K.D. Challenger and J. Moteff: Scripta Metall., 1972, vol. 6, pp. 155-60.10.1016/0036-9748(72)90268-2 ↗