Selective Oxidation of a CMnSi Steel during Heating to 1000 °C: Reversible SiO2 Oxidation
Source abstract
Abstract
Many multiphase cold-rolled high-strength steels require complex thermal processing, including a (partial) austenitization to reach the desired microstructure. However, of importance for their galvanizability, the selective oxidation of these steels in the austenitic region has not been studied extensively. The present work aims at characterizing the selective oxidation of a CMnSi steel during heating up to 1030 °C by X-ray photoelectron spectroscopy (XPS) surface analysis. A phenomenological description of the evolution of the surface composition during heating and soaking in a N2-5 pct H2 atmosphere with a dew point of −50 °C is presented. Four distinct stages of selective oxidation were identified during heating; manganese oxidation, SiO2 film growth, a transition stage, and a steady state with boron nitride (BN) passivation. During the transition stage, the previously formed SiO2 film disappears, resulting in increased iron concentration at the surface. Simultaneously, a BN film forms on the uncovered metallic iron, inhibiting any further oxidation of the surface. It is demonstrated that the SiO2 oxidation is reversible and temperature controlled.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. B. Schuhmacher, T. Heller, M. Steinhorst, and W. Warnecke: Proc. 7th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Osaka, Japan, 2007, Galvatech, pp. 397–402
2. M. Fujine: Proc. 7th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Osaka, Japan, 2007, Galvatech, pp. 374–79
3. A. Miyasaka: Proc. 7th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Osaka, Japan, 2007, Galvatech, pp. 345–50
4. J. Maki, J. Mahieu, B.C. De Cooman, S. Claessens: Mater. Sci. Technol., 2003, vol. 19, pp. 125–3110.1179/026708303225009300 ↗
5. J. Mahieu, S. Claessens, B.C. De Cooman: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2905–0810.1007/s11661-001-1042-5 ↗
6. J. Mahieu, S. Claessens, and B.C. De Cooman: Proc. 5th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Bruxelles, Belgium, 2001, Galvatech, pp. 644–51
7. J.M. Mataigne: Proc. 7th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Osaka, Japan, 2007, Galvatech, pp. 333–38
8. J. Mahieu, S. Claessens, B.C. De Cooman, and F. Goodwin: Proc. 6th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Chicago, IL, 2004, Galvatech, pp. 529–38
9. P. Drillet, Z. Zermout, D. Bouleau, J.M. Mataigne, and S. Claessens: Proc. 6th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Chicago, IL, 2004, Galvatech, pp. 1123–34
10. P. Drillet, Z. Zermout, D. Bouleau, and J.M. Mataigne: Proc. 5th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Bruxelles, Belgium, 2001, Galvatech, pp. 195–202
11. X. Vanden Eynde, J.P. Servais, M. Lamberigts: Surf. Interface Anal., 2002, vol. 33, pp. 322–2910.1002/sia.1198 ↗
12. I. Olefjord, W. Leijon, U. Jelvestam: Appl. Surf. Sci., 1980, vol. 6, pp. 241–5510.1016/0378-5963(80)90015-X ↗
13. I. Hertveldt, B.C. De Cooman, S. Claessens: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1225–3210.1007/s11661-000-0118-y ↗
14. X. Vanden Eynde, J.P. Servais, and M. Lamberigts: Proc. 6th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Chicago, IL, 2004, Galvatech, pp. 361–72
15. D. Huin, H. Saint-Raymond, D. Loison, F. Bertrand, and M. Cornu: Proc. 6th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Chicago, IL, 2004, Galvatech, pp. 1135–44
16. X.S. Li, S.-I. Baek, C.-S. Oh, S.-J. Kim, Y.-W. Kim: Scripta Mater., 2007, vol. 57, pp. 113–1610.1016/j.scriptamat.2007.03.040 ↗
17. T. Van De Putte, Z. Zermout, D. Loison, S. Claessens, J. Penning: Adv. Mater. Res., 2007, vols. 15–17, pp. 129–3410.4028/www.scientific.net/AMR.15-17.129 ↗
18. T. Van De Putte, D. Loison, S. Claessens, Z. Zermout, and J. Penning: Proc. 7th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Osaka, Japan, 2007, Galvatech, pp. 415–20
19. T. Van De Putte, D. Borissov, D. Loison, J. Penning, M. Rohwerder, and S. Claessens: Proc. Int. Conf. on New Development in AHSS, Orlando, FL, June 2008, pp. 69–80
20. B. Bhargava, I. Gouzman, C.M. Chun, T.A. Ramanarayanan, S.L. Bernasek: Appl. Surf. Sci., 2007, vol. 253, pp. 4322–2910.1016/j.apsusc.2006.09.047 ↗
21. A.P. Grosvenor, B.A. Kobe, N.S. McIntyre: Surf. Sci., 2004, vol. 565, pp. 151–6210.1016/j.susc.2004.06.210 ↗
22. M. Lamberigts, J.P. Servais: Appl. Surf. Sci., 1999, vols. 144–145, pp. 334–3810.1016/S0169-4332(98)00822-8 ↗
23. V. Papaefthimiou, A. Siokou, S. Kennou: Thin Solid Films, 2004, vol. 459, pp. 32–3610.1016/j.tsf.2003.12.089 ↗
24. S. Iwata, A. Ishizaka: J. Appl. Phys., 1996, vol. 79, pp. 6653–71310.1063/1.362676 ↗
25. F.J. Grunthaner, P.J. Grunthaner, R.P. Vasques, B.F. Lewis, J. Maserjian: Phys. Rev. Lett., 1979, vol. 43 (22), pp. 1683–8610.1103/PhysRevLett.43.1683 ↗
26. P. Humbert, M. Essouni, A. Mosser: Surf. Interface Anal., 1988, vol. 12, pp. 218–2210.1002/sia.740120308 ↗
27. J.F. Moulder, W.F. Stickle, P.E. Sobol, K.E. Bomben: Handbook of X-ray Photoelectron Spectroscopy, J. Chastian, R.C. King Jr., eds., Physical Electronics, Eden Prairie, MN, 1995
28. I. Parezanovic, M. Spiegel: Steel Res. Int., 2005, vol. 76 (11), pp. 832–3910.1002/srin.200506102 ↗
29. I. Cvijovic, I. Parezanovic, M. Spiegel: Corros. Sci., 2006, vol. 48, pp. 980–9310.1016/j.corsci.2005.02.022 ↗
30. H.J. Grabke, V. Leroy, H. Viefhaus: ISIJ Int., 1995, vol. 35 (2), pp. 95–11310.2355/isijinternational.35.95 ↗
31. I. Parezanovic and M Spiegel: Proc. 6th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Chicago, IL, 2004, Galvatech, pp. 401–10
32. C.A. Long, H.J. Grabke: Appl. Surf. Sci., 1992, vol. 59, pp. 207–1710.1016/0169-4332(92)90120-M ↗
33. A. Itakura, M Tosa, S. Ikeda: Vacuum, 1996, vol. 47 (6–8), pp. 697–70010.1016/0042-207X(96)00050-4 ↗
34. K. Mitsuishi and M. Song: J. Electron Microsc., 2002, vol. 51, pp. S41–S4410.1093/jmicro/51.Supplement.S41 ↗
35. E.A. Gulbransen, S.A. Jansson: Oxidation of Metals and Alloys, ASM, Metals Park, OH, 1970, pp. 64–75
36. E.J. Opila, J.L. Smialek, R. Robinson, D. Fox, N. Jacobson: J. Am. Ceram. Soc., 1999, vol. 82 (7), pp. 1826–3410.1111/j.1151-2916.1999.tb02005.x ↗
37. J.D. Fast, H. Bruning: Z. Elektrochem., 1959, vol. 63 (7), pp. 765–70