Influence of PWHT on Toughness of High Chromium and Nickel Containing Martensitic Stainless Steel Weld Metals
Source abstract
Abstract
Commonly used 12.5Cr-5Ni consumable specified for welding of martensitic stainless steels is compared with newly designed 14.5Cr-5Ni consumable in terms of their suitability for repair welding of 410 and 414 stainless steels by gas tungsten arc welding process. Changes in microstructure and austenite evolution were investigated using optical, scanning electron microscopy, X-ray diffraction techniques and Thermo-Calc studies. Microstructure of as-welded 12.5Cr-5Ni weld metal revealed only lath martensite, whereas as-welded 14.5Cr-5Ni weld metal revealed delta-ferrite, retained austenite, and lath martensite. Toughness value of as-welded 12.5Cr-5Ni weld metal is found to be significantly higher (216 J) than that of the 14.5Cr-5Ni weld metal (15 J). The welds were subjected to different PWHTs: one at 923 K (650 °C) for 1, 2, 4 hours (single-stage PWHT) and another one at 923 K (650 °C)/4 h followed by 873 K (600 °C)/2 h or 873 K (600 °C)/4 h (two-stage heat treatment). Hardness and impact toughness of the weld metals were measured for these weld metals and correlated with the microstructure. The study demonstrates the importance of avoiding formation of delta-ferrite in the weld metal.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. P.D. Bilmes, C.L. Llorente, C.M. Mendez and C.A. Gervasi, Corro. Sci. 51 (2009) 876–881.10.1016/j.corsci.2009.01.018 ↗
2. P.D. Bilmes, Solari and C.l. Llorente, Materials characterization. 46 (2001) 285–296.10.1016/S1044-5803(00)00099-1 ↗
3. Seo-Jae Lee, Yong-Min, Park and Young-Kook Lee, Mater. Sci. Eng. A 515 (2009) 32–37.10.1016/j.msea.2009.02.010 ↗
4. P. Wang, S.P. Lu, N.M. Xiao, D.Z. Li, Y.Y. Li Materials Science and Engineering A 527 (2010) 3210–3216.10.1016/j.msea.2010.01.085 ↗
5. T.G. Gooch, Weld. J., 1995, vol. 74, 213s–23s.
6. C.R. Das, S.K. Albert, A.K. Bhaduri, G. Srinivasan, and V. Ramasubbu. Science and technology of welding and Joining. 13 (2008) 159–166.10.1179/174329308X271814 ↗
7. C.H. Hsu and H.Y. Teng, Jr. Nucl. Mater. 340 (2005) 1–11.10.1016/j.jnucmat.2004.10.004 ↗
8. J.C. Lippold, D.J. Kotecki: Welding Metallurgy and Weldability of Stainless Steels, John Wiley & Sons, Inc., Hoboken, NJ, 2005.
9. J.E. Ramirez, Welding Journal, 86 (2007) 125s–134s.
10. Y.Y. Song, D.H. Ping, F.X. Yin, X.Y. Li and Y.Y. Li, Mater. Sci. Eng A, 527 (2010) 614–618.10.1016/j.msea.2009.08.022 ↗
11. A.W. Marshall, J.C.M. Farrar, Welding In The World. 45 (2001) 19–40.
12. M.C.Balmforth, J.C.Lippold. Welding Research Supplement. 77 (1998)1s.
13. A. L. Schaeffler, Metal Progress. 56(11)(1949) 680–680B.
14. J. Onoro, Journal of Materials Processing Technology. 180 (2006) 137–142.10.1016/j.jmatprotec.2006.05.014 ↗
15. L. Schäfer, J. Nucl. Mater. 262 (1998) 1336–1339.10.1016/S0022-3115(98)00200-1 ↗
16. K. Anderko, L. Schafer and E.Materna-Morris, J. Nucl. Mater. 179–181 (1991) 492–495.10.1016/0022-3115(91)90132-Q ↗
17. F. Abe, M. Igarashi, N. Fujitsuna, K. Kimura, and S. Muneki: Conference Proceeding Advanced Heat Resistant Steel for Power Generation, San Sebastian, Spain, University Press, Cambridge, 1998, pp. 84–87.
18. R.J. Castro and J.J. Cadenet: Welding Metallurgy of Stainless and Heat-Resisting Steels, Cambridge University Press, London, 1968.
19. S.A. Bashu, K. Singh, and M.S. Rawat: Mater. Sci. Eng. A, 1990, vol. 127, pp. 7–15.10.1016/0921-5093(90)90184-5 ↗
20. D. Carrouge, H.K.D.H. Bhadeshia, and P. Woollin: Sci. Eng. A, 2010, vol. 527, pp. 3210–16.10.1016/j.msea.2010.01.085 ↗
21. G. Alkan, D. Chae and S. –J. Kim, Mater. Sci. Eng. A 585 (2013) 39–46.10.1016/j.msea.2013.07.015 ↗
22. H. Klug and L.E. Alexander, X-ray Diffraction Procedures, 2nd ed. John Wiley and Sons, New York. 1974.
23. http://www.msm.cam.ac.uk/map/crystal/tar/xrdcalc.tar. Accessed 3 June 2012.
24. Thermo-Calc Software AB, Stockholm, Sweden.
25. M. Tamura, Y. Haruguchi, M. Yamashtia, Y. Nagaoka, K. Ohinata, K. Ohnishi, H. Ito, K. Shinozuka and H. Esaka, ISIJ Int., 46(2006) 1693–1702.10.2355/isijinternational.46.1693 ↗
26. D. Carrouge, H.K.D.H. Bhadeshia and P. Woollin, Sci. Technol. Weld. Join. 9(2004)377–389.10.1179/136217104225021823 ↗
27. T.C. Totemeier, J.A. Simpson and H. Tian, Mater. Sci. Eng. A 426 (2006) 323–331.10.1016/j.msea.2006.04.023 ↗
28. C.R. Das, H.C. Dey, G. Srinivasan, S.K. Albert, A.K. Bhaduri and A. Dasgupta, Sci. Tech. Welding and Joining 11(2006) 502–508.10.1179/174329306X148147 ↗
29. C.R. Das, A.K. Bhaduri and S.K. Albert, A. Dasgupta, Int. J. Nucl. Sci. Technol. 4 (2009) 355–365.10.1504/IJNEST.2009.028601 ↗
30. F. Abe, Mater. Sci. Eng. A 387–389 (2004) 565–569.10.1016/j.msea.2004.01.057 ↗
31. J.C. M. Li, Acta Metall. 8(1960) 563–573.10.1016/0001-6160(60)90111-5 ↗
32. K. Hirano, M. Cohen and B.L. Averbach, Acta. Matter. 9(1961)440–445.10.1016/0001-6160(61)90138-9 ↗