journal article·2010-12

Analysis of Deformation Kinetics in Seven Body-Centered-Cubic Pure Metals Using a Two-Obstacle Model

Paul S. Follansbee

Publisher page

Abstract

Published temperature and strain-rate-dependent yield stress data in seven nominally pure bcc metals are analyzed according to a two-obstacle model. A strong intrinsic lattice resistance such as a Peierls barrier and a weaker obstacle representing the collective effects of impurity constituents are combined in a single expression and fit to the individual data sets. Sensitivity of the model fits to selected model parameters is assessed. The activation volume for each obstacle is evaluated and examined to validate the underlying model assumptions. Application of the model demonstrates a consistent Peierls barrier in all seven metals and a reasonable carbon-content dependence in iron of the strength of the impurity obstacle.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. J.W. Christian: The Theory of Transformations in Metals and Alloys, 2nd ed., Pergamon Press, Oxford, United Kingdom, 1975, p. 278.
2. R.W.K. Honeycombe: The Plastic Deformation of Metals, 2nd ed., Edward Arnold Publishers, Victoria, Australia, 1984, p. 108.
3. H. Conrad and W.D. Robertson: Trans. AIME, 1957, vol. 209, pp. 503–11.
4. J.W. Christian: Metall. Trans. A, 1983, vol. 14A, pp. 1237–56.10.1007/BF02664806 ↗
5. P.B. Hirsch: Trans. JIM, 1968, vol. 9, Suppl.
6. V. Vitek and M.S. Duesbery: in Mechanical Properties of Bcc Metals, M. Meshii, ed., TMS-AIME, Warrendale, PA, 1982, pp. 3–11.
7. D.F. Stein, J.R. Low, Jr., and A.U. Seybolt: Acta Metall., 1963, vol. 11, pp. 1253–62.10.1016/0001-6160(63)90114-7 ↗
8. J.O. Ratka, V.K. Sethi, and R. Gibala: in Mechanical Properties of Bcc Metals, M. Meshii, ed., TMS-AIME, Warrendale, PA, 1982, pp. 103–09.
9. D.F. Stein: Can. J. Phys., 1967, vol. 45, pp. 1063–74.10.1139/p67-078 ↗
10. J.D. Campbell and T.L. Briggs: “The Effect of Strain Rate and Temperature on the Yield and Flow of Polycrystalline Niobium and Molybdenum,” Department of Engineering Science Report No. 1091, University of Oxford, Oxford, United Kingdom, 1969.
11. S.R. Chen, P.J. Maudlin, and G.T. Gray III: “Mechanical Properties and Constitutive Relations for Molybdenum under High-Strain-Rate Deformation,” Los Alamos National Laboratory Report No. LA-UR-98-1870, Symposium on Molybdenum and Molybdenum Alloys, TMS Annual Meeting, San Antonio, TX, TMS, Warrendale, PA, 1998.10.2172/674989 ↗
12. Abdell-Salam M. Eleiche: “A Literature Survey of the Combined Effects of Strain Rate and Elevated Temperature on the Mechanical Properties of Metals,” AFML-TR-72-125, Air Force Materials Laboratory, Dayton, OH, 1972.
13. G.T. Gray III and S-R. Chen: Los Alamos National Laboratory, Los Alamos, NM, unpublished research, 1993.
14. S. Nemat-Nasser and W. Guo: Mater. Sci. Eng., 2000, vol. A284, pp. 202–10.10.1016/S0921-5093(00)00740-1 ↗
15. S.-R. Chen and G.T. Gray III: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2994–3006.10.1007/BF02663849 ↗
16. K.G. Hoge and A.K. Mukherjee: J. Mater. Sci., 1977, vol. 12, pp. 1666–72.10.1007/BF00542818 ↗
17. S.-R. Chen and G.T. Gray III: 2nd Int. Conf. on Tungsten and Refractory Metals, Metal Powder Industries Federation, A. Bose and R.J. Dowding, eds., Princeton, NJ, 1995, pp. 489–98.
18. D. Brunner and V. Glebovsky: Mater. Lett., 2000, vol. 44, pp. 144–52.10.1016/S0167-577X(00)00017-3 ↗
19. Rare Metals Handbook, 2nd ed., D.A. Hampel, ed., Chapman and Hall, New York, NY, 1961.
20. A. Buch: Pure Metals Properties, A Scientific-Technical Handbook, ASM INTERNATIONAL, Materials Park, OH, 1999, p. 54.
21. S. Nemat-Nasser and W. Guo: Mech. Mater., 2000, vol. 32, pp. 243–60.10.1016/S0167-6636(99)00056-3 ↗
22. H.L. Wain, F. Henderson, S.T.M. Johnston, and N. Louat: J. Inst. Met., 1957, vol. 86, pp. 281–88.
23. J.M. Krafft, A.M. Sullivan, and C.F. Tipper: Proc. R. Soc. A, 1953, vol. 221, pp. 114–27.10.1098/rspa.1954.0009 ↗
24. R.W. Armstrong and J.D. Campbell: Proc. 3rd Int. Conf. on the Strength of Metals and Alloys, Institute of Metals, Cambridge, United Kingdom, 1973, pp. 529–33.
25. T. Nojima: in Impact Loading and Dynamic Behaviour of Materials, C.Y. Chiem, H.-D Kunze, and L.W. Meyer, eds., Informationgesellschaft, Verlag, Bremen, Germany, 1988, pp. 357–64.
26. L.R. Veeser, G.T. Gray III, J.E. Vorthman, P.J. Rodriquez, and R.S. Hixson: Shock Compression of Condensed Matter—1999, AIP Conf. Proc., M.D. Furnish, L.C. Chhabildas, and R.S. Hixson, eds., American Institute of Physics Press, Woodbury, NY, 2000, pp. 73–76.
27. G.T. Gray III, D.B. Hayes, and R.S. Hixson: J. Phys. IV, 2000, vol. 10, pp. 755–60.10.1051/jp4:20009125 ↗
28. T. Muller: Acta Metall., 1971, vol. 19, pp. 691–99.10.1016/0001-6160(71)90024-1 ↗
29. D.L. Davidson, U.S. Lindholm, and L.M. Yeakley: Acta Metall., 1966, vol. 14, pp. 703–10.10.1016/0001-6160(66)90117-9 ↗
30. H.L.D. Pugh and S.S. Chang: Philos. Mag., 1963, vol. 8, pp. 753–68.10.1080/14786436308211127 ↗
31. J.S. Erickson and J.R. Low, Jr.: Acta Metall., 1957, vol. 5, pp. 405–06.10.1016/0001-6160(57)90011-1 ↗
32. P.S. Follansbee, J.P. Ledesma, and S. Starrett: University of California at San Diego, San Diego, CA, unpublished research, 1988.
33. N. Nagata, S. Yoshida, and Y. Sekino: Trans. ISIJ, 1970, vol. 10, pp. 173–80.10.2355/isijinternational1966.10.173 ↗
34. T.E. Mitchell, P. Peralta, and J.P. Hirth: Acta Mater., 1999, vol. 47, pp. 3687–94.10.1016/S1359-6454(99)00207-4 ↗
35. T.E. Mitchell, J.P. Hirth, and P. Peralta: in Advanced Materials for the 21st Century, Y.-W. Chung, D.C. Dunand, P.K. Liaw, and G.B. Olson, eds., TMS, Warrendale, PA, 1999, pp. 137–47.
36. P.S. Follansbee and U.F. Kocks: Acta Metall., 1988, vol. 36, pp. 81–93.10.1016/0001-6160(88)90030-2 ↗
37. P.S. Follansbee and G.T. Gray III: Metall. Trans. A, 1989, vol. 20A, pp. 863–74.10.1007/BF02651653 ↗
38. P.S. Follansbee, J.C. Huang, and G.T. Gray III: Acta Metall., 1990, vol. 38, pp. 1241–54.10.1016/0956-7151(90)90195-M ↗
39. G. Regazzoni, U.F. Kocks, and P.S. Follansbee: Acta Metall., 1987, vol. 35, pp. 2865–75.10.1016/0001-6160(87)90285-9 ↗
40. U.F. Kocks, A.S. Argon, and M.F. Ashby: Progress in Materials Science V, Pergamon Press, Oxford, United Kingdom, 1975, vol. 19, p. 142.
41. Y.P. Varshni: Phys. Rev. B, 1970, vol. 2 (10), pp. 3952–58.10.1103/PhysRevB.2.3952 ↗
42. R. Gröger, A.G. Vailey, and V. Vitek: Acta Mater., 2008, vol. 56, pp. 5401–11.10.1016/j.actamat.2008.07.018 ↗
43. R. Gröger and V. Vitek: Acta Mater., 2008, vol. 56, pp. 5426–39.10.1016/j.actamat.2008.07.027 ↗
44. J.W. Christian: in Strengthening Methods in Crystals, A. Kelly and R.B. Nicholson, eds., John Wiley & Sons, New York, NY, 1971, p. 286.
45. D.F. Stein and J.R. Low, Jr.: Acta Metall., 1966, vol. 14, pp. 1183–94.10.1016/0001-6160(66)90236-7 ↗