Effect of Strain Rate on the Yield Stress of Ferritic Stainless Steels
Source abstract
Abstract
The effect of strain rate on the yield stress of ferritic stainless steel sheet was experimentally determined and a previously developed model was applied to the data. Five ferritic stainless steel alloys, including one in two thicknesses, were mechanically tested at room temperature in uniaxial tension at strain rates ranging from 0.001 to 300 s−1, and low-strain-rate tests were selectively performed at nonambient temperatures. The hypothesis that ferritic stainless steels react similarly to strain rate as mild steels was investigated by the application of a widely accepted strengthening model, based on body-centered-cubic (bcc) crystal lattice deformation mechanisms, to the experimental data.[1] Yield stresses were compared to model predictions and good agreement was found. The results allow for the prediction of yield stresses for these materials over strain rate ranges of 0.001 to 300 s−1, and as a function of test temperature. Model parameters for the ferritic stainless steels were reasonable relative to those previously reported for pure bcc ferritic iron.[1] A correlation between the effect of alloying additions on solid solution strengthening and the athermal component of shear stress is also suggested. The results allow prediction of yield stress of ferritic stainless steels over a wide range of strain rates and temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and Mechanical Properties of Steels · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. D. Brunner, J. Diehl: Phys. Status Solidi A, 1991, vol. 124, pp. 155–7010.1002/pssa.2211240114 ↗
2. C.W. Kovach: High-Performance Stainless Steels, Nickel Institute, Toronto, ON, Canada, 2000, pp. 25–27
3. The Catalyst, Armco Publication, Middletown, OH, 1997, Issue No. 3, p. 4
4. A. Seeger and P. Schiller: in Physical Acoustics, W.P. Mason, ed., Academic Press, New York, NY, 1966, vol. IIIA, pp. 361–491
5. D. Brunner and J. Diehl: Strength of Materials, ICSMA 10, Japan Institute of Metals, Sendai, Japan, Aug. 22–26, 1994, pp. 141–44
6. D. Brunner, J. Diehl: Phys. Status Solidi A, 1987, vol. 104, pp. 145–5510.1002/pssa.2211040110 ↗
7. D. Brunner, J. Diehl: Phys. Status Solidi A, 1991, vol. 124, pp. 455–6410.1002/pssa.2211240210 ↗
8. D. Brunner, J. Diehl: Phys. Status Solidi A, 1991, vol. 125, pp. 203–1610.1002/pssa.2211250117 ↗
9. D. Brunner, J. Diehl: Z. Metallkd., 1992, vol. 12 (83), pp. 828–34
10. D. Brunner, J. Diehl, and A. Seeger: Conf. Structure and Properties of Crystal Defects, Liblice, Czechoslovakia, Elsevier Science Ltd., Oxford, UK, 1984, pp. 175–83.
11. W.A. Spitzig, A.S. Keh: Metall. Trans., 1970, vol. 1, pp. 2751–5710.1007/BF03037811 ↗
12. W.C. Leslie: Metall. Trans., 1972, vol. 3, pp. 5–2610.1007/BF02680580 ↗
13. W.C. Leslie: The Physical Metallurgy of Steels, Hemisphere Publishing, India, 1981, pp. 37–38, 118–19, 127, and 197
14. T.Z. Blazynski: Materials at High Strain Rates, Elsevier Applied Science, New York, NY, 1987, pp. 133–48
15. A. Seeger: Conference Dislocations 1984 in Aussois, France, 8–17 March 1984, Editions du Centre National de la Rechereche Scientifique, Paris, France, 1984.
16. F. Ackermann, H. Mughrabi, A. Seeger: Acta Metall., 1983, vol. 31 (9), pp. 1353–6610.1016/0001-6160(83)90006-8 ↗
17. A. Seeger: Z. Metallkd., 1981, vol. 72, pp. 369–80
18. G.E. Dieter: Mechanical Metallurgy, 3rd. ed., McGraw-Hill, Inc., New York, NY, 1986, pp. 189–90
19. K.D. Clarke: Master’s Thesis, T-5635, Colorado School of Mines, Golden, CO, July, 2002
20. K.D. Clarke, R.J. Comstock, Jr., M.C. Mataya, D.K. Matlock, J.G. Speer, and G.P. Martins: Technical Paper No. 2003-01-0526, Society of Automotive Engineers, Warrendale, PA, 2003
21. D.M. Bruce: Ph.D. Thesis, T-5780, Colorado School of Mines, Golden, CO, July 2003
22. D.M. Bruce, J.G. Speer, D.K. Matlock, and A. De: Technical Paper No. 2004-01-0507, Society of Automotive Engineers, Warrendale, PA, 2004
23. I.D. Choi, D.M. Bruce, S.J. Kim, C.G. Lee, S.H. Park, D.K. Matlock, J.G. Speer: ISIJ Int., 2002, vol. 42 (12), pp. 1483–8910.2355/isijinternational.42.1483 ↗
24. R.E. Reed-Hill, R. Abbaschian: Physical Metallurgy Principles, 2nd ed., PWS Publishing Company, Boston, MA, 1973, p. 268
25. W.C. Leslie, R.J. Sober, S.G. Babcock, S.J. Green: Trans. ASM, 1969, vol. 62, pp. 690–710
26. M.A. Meyers, K.K. Chawla: Mechanical Behavior of Materials, Prentice-Hall, Upper Saddle River, NJ, 1999, pp. 270–72
27. T.H. Courtney: Mechanical Behavior of Materials, McGraw-Hill, New York, NY, 1990, pp. 169–73