journal article·2010-09

Gigacycle Fatigue Properties of Hydrogen-Charged JIS-SCM440 Low-Alloy Steel Under Ultrasonic Fatigue Testing

Yoshiyuki Furuya, Hisashi Hirukawa, Masao Hayakawa

Publisher page

Abstract

Gigacycle fatigue tests were conducted on hydrogen-charged low-alloy steel. In this study, high- and low-strength specimens were prepared to investigate the effects of hydrogen on internal and surface fractures, respectively. The fatigue tests were conducted mainly by ultrasonic fatigue testing at 20 kHz and additionally by conventional servohydraulic fatigue testing at 50 Hz. All high-strength specimens revealed internal fractures. The fatigue strength of the hydrogen-charged specimens was much lower than that of the uncharged specimens. In the low-strength specimens, the uncharged specimens revealed surface fractures in the short-life regions in addition to internal fractures in the long-life regions. However, the hydrogen-charged specimens revealed internal fractures only that were combined with a much lower fatigue strength. The difference in fracture surfaces was small between the hydrogen-charged and the uncharged specimens, whereas the optically dark areas of the hydrogen-charged specimens seemed smaller than those of the uncharged specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Y. Murakami: Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions, Elsevier, London, UK, 2002.
2. P.H. Frith: J. Iron Steel Inst., 1955, vol. 180, p. 26.
3. H. Emura and K. Asami: Trans. JSME, 1989, vol. 55, pp. 45–50.10.1299/kikaia.55.45 ↗
4. Y. Murakami, M. Takada, and T. Toriyama: Int. J. Fatigue, 1998, vol. 16, pp. 661–67.10.1016/S0142-1123(98)00028-0 ↗
5. S. Nishijima and K. Kanazawa: Fatigue Fract. Eng. Mater. Struct., 1999, vol. 22, pp. 601–07.10.1046/j.1460-2695.1999.00206.x ↗
6. T. Sakai, M. Takeda, N. Tanaka, M. Kanemitsu, N. Oguma, and K. Shiozawa: Trans. JSME Ser. A, 2001, vol. 67, pp. 1805–12.10.1299/kikaia.67.1805 ↗
7. K. Shiozawa, L.T. Lu, and S. Ishihara: Fatigue Fract. Eng. Mater. Struct., 2001, vol. 24, pp. 781–90.10.1046/j.1460-2695.2001.00459.x ↗
8. K. Tanaka and Y. Akiniwa: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 775–84.10.1046/j.1460-2695.2002.00547.x ↗
9. Y. Ochi, T. Matsumura, K. Masaki, and S. Yoshida: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 823–30.10.1046/j.1460-2695.2002.00575.x ↗
10. T. Abe, Y. Furuya, and S. Matsuoka: Fatigue Fract. Eng. Mater. Struct., 2004, vol. 27, pp. 159–67.10.1111/j.1460-2695.2004.00737.x ↗
11. H. Mayer, W. Haydn, R. Schuller, S. Issler, and M. Bacher-Höchst: Int. J. Fatigue, 2009, vol. 31, pp. 1300–08.10.1016/j.ijfatigue.2009.02.038 ↗
12. Y. Murakami, T. Nomoto, and T. Ueda: Fatigue Fract. Eng. Mater. Struct., 1999, vol. 22, pp. 581–90.10.1046/j.1460-2695.1999.00187.x ↗
13. Y. Murakami, N.N. Yokoyama, and J. Nagata: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 735–46.10.1046/j.1460-2695.2002.00576.x ↗
14. H.L. Wilson and M. Baskes: J. Nucl. Mater., 1978, vol. 76, pp. 291–97.10.1016/0022-3115(78)90160-5 ↗
15. W.Y. Choo and J.Y. Lee: Metall. Trans. A, 1982, vol. 13A, pp. 135–40.10.1007/BF02642424 ↗
16. M. Nagumo, K. Ohta, and H. Saitoh: Scripta Mater., 1999, vol. 40, pp. 313–19.10.1016/S1359-6462(98)00436-9 ↗
17. H.H. Johnson, J.G. Morlet, and A.R. Troiano: Trans. TMS AIME, 1958, vol. 212, pp. 528–36.
18. Y. Kimura, Y. Sakai, T. Hara, A. Belyakov, and K. Tsuzaki: Scripta Mater., 2003, vol. 49, pp. 1111–16.10.1016/j.scriptamat.2003.08.006 ↗
19. M. Wang, E. Akiyama, and K. Tsuzaki: Mater. Sci. Eng. A, 2005, vol. 398, pp. 37–46.10.1016/j.msea.2005.03.008 ↗
20. N. Yasumaru, K. Tsuchida, E. Saji, and T. Ibe: Mater. Trans., 1993, vol. 34, pp. 696–702.10.2320/matertrans1989.34.696 ↗
21. H.J.C. Voorwald, R. Padiha, M.Y.P. Costa, W.L. Pigatin, and M.O.H. Cioffi: Int. J. Fatigue, 2007, vol. 29, pp. 695–704.10.1016/j.ijfatigue.2006.07.004 ↗
22. W.P. Mason: J. Acoust. Soc. Am., 1956, vol. 28, pp. 1207–18.10.1121/1.1908595 ↗
23. H. Kuhn and D. Medlin: ASM Handbook, Vol. 8, Mechanical Testing and Evaluation, ASM INTERNATIONAL, Materials Park, OH, 2000, pp. 717–29.10.31399/asm.hb.v08.a0003315 ↗
24. H. Mayer: Int. Mater. Rev., 1999, vol. 44, pp. 1–34.10.1179/imr.1999.44.1.1 ↗
25. H. Ishii, T. Yagasaki, and H. Akagi: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 831–35.10.1046/j.1460-2695.2002.00561.x ↗
26. C. Bathias and P.C. Paris: Gigacycle Fatigue in Mechanical Practice, Marcel Decker, New York, NY, 2004.10.1201/9780203020609 ↗
27. Y. Furuya, S. Matsuoka, T. Abe, and K. Yamaguchi: Scripta Mater., 2002, vol. 46, pp. 157–62.10.1016/S1359-6462(01)01213-1 ↗
28. Y. Furuya, T. Abe, and S. Matsuoka: Fatigue Fract. Eng. Mater. Struct., 2003, vol. 26, pp. 641–45.10.1046/j.1460-2695.2003.00661.x ↗
29. Y. Furuya: Scripta Mater., 2008, vol. 58, pp. 1014–17.10.1016/j.scriptamat.2008.01.039 ↗
30. E. Takeuchi, Y. Furuya, N. Nagashima, and S. Matsuoka: Fatigue Fract. Eng. Mater. Struct., 2008, vol. 31, pp. 599–605.10.1111/j.1460-2695.2008.01257.x ↗
31. Y. Murakami and J. Nagata: Trans. JSME Ser. A, 2004, vol. 70, pp. 1093–101.10.1299/kikaia.70.1093 ↗
32. Y. Murakami and J. Nagata: J. Soc. Mater. Sci. Jpn., 2005, vol. 54, pp. 420–27.10.2472/jsms.54.420 ↗
33. T.B. Mclaren and A.W. Thompson: Mater. Sci. Eng., 1983, vol. 57, pp. L21–25.10.1016/0025-5416(83)90222-7 ↗
34. H. Ouchi, J. Kobayashi, T. Ishikawa, H. Takezawa, R. Ebara, and Y. Yamada: Tetsu-to-Hagane, 1994, vol. 80, pp. 475–80. In Japanese.10.2355/tetsutohagane1955.80.6_475 ↗
35. J.H. Chuang, L.W. Tsay, and C. Chen: Int. J. Fatigue, 1998, vol. 20, pp. 531–36.10.1016/S0142-1123(98)00019-X ↗