High-Temperature Compression Behavior of Cast and Homogenized IN939 Superalloy
Source abstract
Abstract
Hot deformation behavior of IN-939 superalloy was investigated in this work. Hot compression experiments were performed at temperatures of 1273 K, 1323 K, 1373 K, and 1423 K (1000 °C, 1050 °C, 1100 °C, and 1150 °C) at strain rates of 0.001, 0.01, 0.1, and 1 s−1 up to a true strain of 0.8. Then variations in stress-strain curves as well as changes in microstructures of various hot-deformed samples were studied. At 1273 K to 1323 K (1000 °C to 1050 °C), dynamic recovery (DRV), and at 1373 K to 1423 K (1100 °C to 1150 °C), dynamic recrystallization (DRX), were recognized to be the main mechanisms of the alloy softening during hot compression tests. The relationships between flow stress, strain rate, and temperature were mathematically modeled with three well-known equations, and on the basis of those equations, the activation energy of hot deformation was calculated. For improvement of the proposed models, it was necessary to conduct the investigation at two temperature ranges: 1373 K to 1423 K (1100 °C to 1150 °C), in which DRX occurred, and 1273 K to 1323 K (1000 °C to 1050 °C), where DRV as well as γ′ precipitation happened. For each of the temperature ranges, a different value for activation energy was obtained, which in conjunction with the related model, can be used for simulating the deformation behavior of the alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. G.E. Dieter, H.A. Kuhn, and S.L. Semiatin: Handbook of Workability and Process Design, ASM INTERNATIONAL, Materials Park, OH, 2003, pp. 22–44.
2. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier Ltd., Oxford, U.K., 2004, pp. 415–50.10.1016/B978-008044164-1/50017-7 ↗
3. N. Srinivasan and Y.V.R.K. Prasad: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2275–84.10.1007/BF02652327 ↗
4. Y. Ning, Z. Yao, M.W. Fu, and H. Guo: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8065–70.10.1016/j.msea.2011.07.053 ↗
5. A.R. Mashreghi, H. Monajatizadeh, M. Jahazi, and S. Yue: Mater. Sci. Technol., 2004, vol. 20, pp. 161–66.10.1179/026708304225010343 ↗
6. S.C. Medeiros, Y.V.R.K. Prasad, W.G. Frazier, and R. Srinivasan: Mater. Sci. Eng. A, 2000, vol. 293, pp. 198–207.10.1016/S0921-5093(00)01053-4 ↗
7. S.L. Semiatin, D.S. Weaver, P.N. Fagin, M.G. Glavicic, R.L. Goetz, N.D. Frey, R.C. Kramb, and M.M. Anthony: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 679–93.10.1007/s11661-004-0379-y ↗
8. F. Kang, J. Sun, G. Zhang, and Z. Li: J. Mater. Sci. Technol., 2009, vol. 25, pp. 373–78.
9. S.P. Coryell, K.O. Findley, M.C. Mataya, and E. Brown: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 633–49.10.1007/s11661-011-0889-3 ↗
10. M.Q. Li, W.B. Ju, Y.Y. Lin, X.J. Wang, and Y. Niu: Mater. Sci. Technol., 2008, vol. 24, pp. 1195–98.10.1179/174328406X148769 ↗
11. J.B. Wahl and K. Harris: Can. Metall. Q., 2011, vol. 50, pp. 207–14.10.1179/1879139511Y.0000000010 ↗
12. G. Sjoberg, D. Imamovic, J. Gabel, O. Caballero, J.W. Brooks, J. Ferte, and A. Lugan: 10th Int. Symp. on Superalloys, TMS, Warrendale, PA, 2004, pp. 441–50.10.7449/2004/Superalloys_2004_441_450 ↗
13. R.W. Hatala and J.J. Schirra: 8th Int. Symp. on Superalloys, TMS, Warrendale, PA, 1996, pp. 137–43.10.7449/1996/Superalloys_1996_137_143 ↗
14. T.B. Gibbons and R. Stickler: High Temperature Alloys for Gas Turbines, D. Reidel Publishing Co., Dordrecht, 1982, pp. 369–94.10.1007/978-94-009-7907-9_15 ↗
15. M.T. Jovanovic, Z. Miskovic, and B. Lukic: Mater. Charact., 1998, vol. 40, pp. 261–68.10.1016/S1044-5803(98)00013-8 ↗
16. S.W.K. Shaw: 4th Int. Symp. on Superalloys, ASM, Metals Park, OH, 1980, pp. 275–84.10.7449/1980/Superalloys_1980_275_284 ↗
17. K.M. Delargy, S.W.K. Shaw, and G.D.W. Smith: Mater. Sci. Technol., 1986, vol. 2, pp. 1031–37.10.1179/026708386790328137 ↗
18. C.P. Cutler and S.W.K. Shaw: 5th Int. Conf. on the Strength of Metals and Alloys, Pergamon Press, New York, NY, 1979, pp. 1357–62.10.1016/B978-1-4832-8412-5.50224-1 ↗
19. T.B. Gibbons, S. Osgerby, F. Gabrielli, and V. Lupine: Mater. Sci. Technol., 1987, vol. 3, pp. 268–74.10.1179/026708387790122684 ↗
20. W. Hoffelner: Metall. Trans. A, 1982, vol. 13A, pp. 1245–55.10.1007/BF02645508 ↗
21. M.A. Gonzalez, D.I. Martinez, A. Perez, H. Guajardo, and A. Garza: Mater. Charact., 2011, vol. 62, pp. 1116–23.10.1016/j.matchar.2011.09.006 ↗
22. M.R. Jahangiri, H. Arabi, and S.M.A. Boutorabi: Mater. Sci. Technol., 2012, vol. 28, pp. 1470–78.10.1179/1743284712Y.0000000073 ↗
23. S.P. Coryell, K.O. Findley, and M.C. Mataya: Suppl. Proc.: Mater. Process. Prop., TMS, Seattle, WA, 2010, vol. 1, pp. 291–98.
24. I. Gutierrez-Urrutia and D. Raabe: Acta Mater., 2012, vol. 60, pp. 5791–5802.10.1016/j.actamat.2012.07.018 ↗
25. R.L. Goetz and S.L. Semiatin: J. Mater. Eng. Perform., 2001, vol. 10, pp. 710–17.10.1361/105994901770344593 ↗
26. D. Shahriari, M.H. Sadeghi, A. Akbarzadeh, and M. Cheraghzadeh: Int. J. Adv. Manufact. Technol., 2009, vol. 45, pp. 841–50.10.1007/s00170-009-2036-5 ↗
27. Y. Liu, R. Hu, J. Li, H. Kou, H. Li, H. Chang, and H. Fu: Mater. Sci. Eng. A, 2009, vol. 508, pp. 141–47.10.1016/j.msea.2008.12.032 ↗
28. H. Monajati, M. Jahazi, S. Yue, and A.K. Taheri: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 895–905.10.1007/s11661-005-0284-z ↗
29. M.J. Luton and C.M. Sellars: Acta Metall., 1969, vol. 17, pp. 1033–43.10.1016/0001-6160(69)90049-2 ↗
30. T. Sakai and J.J. Jonas: Acta Metall., 1984, vol. 32, pp. 189–209.10.1016/0001-6160(84)90049-X ↗
31. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
32. M. Ueki, S. Horie, and T. Nakamura: Mater. Sci. Technol., 1987, vol. 3, pp. 329–37.10.1179/026708387790122585 ↗
33. H.J. McQueen and C.A.C. Imbert: J. Alloy Compd., 2004, vol. 378, pp. 35–43.10.1016/j.jallcom.2003.10.067 ↗
34. M. Mataya, E. Nilsson, E. Brown, and G. Krauss: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 3021–41.10.1007/s11661-003-0201-2 ↗
35. C. Cui, Y. Gu, H. Harada, and A. Sato: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2921–27.
36. Y. Liu, R. Hu, J. Li, H. Kou, H. Li, H. Chang, and H. Fu: Mater. Sci. Eng. A, 2008, vol. 497, pp. 283–89.10.1016/j.msea.2008.07.052 ↗
37. A.A. Guimaraes and J.J. Jonas: Metall. Trans. A, 1981, vol. 12A, pp. 1655–66.10.1007/BF02643571 ↗
38. A. Nowotnik: J. Achiev. Mater. Manufact. Eng., 2008, vol. 27, pp. 115–22.
39. Y. Liu, R. Hu, J. Li, H. Kou, H. Li, H. Chang, and H. Fu: J. Mater. Process. Technol., 2009, vol. 209, pp. 4020–26.10.1016/j.jmatprotec.2008.09.024 ↗
40. M.C. Somani, K. Muraleedharan, Y.V.R.K. Prasad, and V. Singh: Mater. Sci. Eng. A, 1998, vol. 245, pp. 88–99.10.1016/S0921-5093(97)00698-9 ↗
41. K. Gopinath, A.K. Gogia, S.V. Kamat, R. Balamuralikrishnan, and U. Ramamurty: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2340–49.10.1007/s11661-008-9585-3 ↗
42. C.M. Sellars and W.J. McTegart: Acta Metall., 1966, vol. 14, pp. 1136–38.10.1016/0001-6160(66)90207-0 ↗
43. N.D. Ryan, H.J. McQueen, and E. Evangelista: Mater. Sci. Eng., 1986, vol. 81, pp. 259–72.10.1016/0025-5416(86)90267-3 ↗
44. Z. Bi, M. Zhang, J. Dong, K. Luo, and J. Wang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4373–82.10.1016/j.msea.2010.03.075 ↗
45. N.D. Ryan and H.J. McQueen: J. Mech. Work. Technol., 1986, vol. 12, pp. 279–96.10.1016/0378-3804(86)90001-X ↗
46. M.R. Jahangiri, S.M.A. Boutorabi, and H. Arabi: Mater. Sci. Technol., 2012, vol. 28, pp. 1402–13.10.1179/1743284712Y.0000000090 ↗
47. M.R. Jahangiri, H. Arabi, and S.M.A. Boutorabi: Int. J. Min. Metall. Mater., in press.
48. Y. Yuan, Y. Gu, C. Cui, T. Osada, T. Yokokawa, and H. Harada: Adv. Eng. Mater., 2011, vol. 13, pp. 296–300.10.1002/adem.201000232 ↗
49. D. Li, Q. Guo, S. Guo, H. Peng, and Z. Wu: Mater. Des., 2011, vol. 32, pp. 696–705.10.1016/j.matdes.2010.07.040 ↗
50. L. Wang, S. Wang, Y. Liu, and G. Zhao: Mater. Sci. Forum, 2010, vols. 638–642, pp. 2357–62.10.4028/www.scientific.net/MSF.638-642.2357 ↗
51. M. Aghaie-Khafri and N. Golarzi: J. Mater. Sci., 2008, vol. 43, pp. 3717–24.10.1007/s10853-008-2604-3 ↗
52. B. Lopez and J.J. Urcola: Mater. Sci. Technol., 1996, vol. 12, pp. 673–78.10.1179/026708396790122440 ↗
53. C. Sun, J. Liu, R. Li, Q. Zhang, and J. Dong: Rare Met., 2011, vol. 30, pp. 81–86.10.1007/s12598-011-0202-z ↗