Assessment of the origin of porosity in electron-beam-welded TA6V plates
Source abstract
Abstract
Experimental and theoretical analysis of the origin of porosity in electron-beam (EB) welding is detailed. The experiments are run with several surface treatments and reasonable welding parameters. The plate faces are characterized before welding with a number of methods, such as scanning electron microscope observation, X-ray photoemission spectroscopy (XPS) and, more significantly, secondary ion mass spectroscopy (SIMS) analysis, elastic-recoil detection analysis (ERDA) for hydrogen analysis, and surface roughness measurement. After welding, pores are sought with X-ray detection, phased-array ultrasonic (US) detection, and destructive control. An original comparison between ERDA and refined SIMS measurements allows a quantitative evaluation of surface pollution with hydrogen, oxygen, and carbon. The theoretical analysis is based on the literature concept that the cavities are nucleated from the adjacent plate faces in the solid state, just before melting. A less classical development is proposed in term of the evolution of bubbles in the weld pool. Once in the liquid, the cavities become bubbles. Their radius oscillates, according to Rayleigh-Plesset equations of bubbles, due to temperature and pressure driving forces. Solidification freezes them as they are, thus, forming pores. The extreme values of the oscillation give a good idea of the range of the size of pores in the weld joint, as the comparison between experiments and prediction states. A criterion of surface cleanliness is set, relating the surface pollution and the surface roughness. Above the criterion, the bubbles remain small during their oscillation. Below the criterion they tend to grow large. All the degraded-surface treatments are in dirty situation (large pores), and the reference surface treatment lies around the criterion for cleanliness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. A.K. Shah and S.D. Kulkarni: Welding J., Welding Res. Suppl., 1995, Sept., pp. 297–304.
2. J.L. Waisman, G. Sines, and L.B. Robinson: Metall. Trans., 1973, vol. 4, pp. 291–302.10.1007/BF02649629 ↗
3. W.A. Baeslack, W.R. Davis, and C.E. Cross: ASM Handbook, ASM INTERNATIONAL, Meterials Park, OH, vol. 6, 2001, pp. 507–23.
4. K. Keshava Murthy and S. Sundaresan: Welding Res. Suppl., 1997, Feb., pp. 81–91.
5. T. Khaled: J. Mater. Eng. Performance, 1994, vol. 3, pp. 21–36.10.1007/BF02654496 ↗
6. G.W. Kuhlman and A.K. Chakrabarti: in Microstructure Fracture Toughness and Fatigue Crack Growth Rate in Ti Alloys, A.K. Chakrabarti and J.C. Chesnutt, eds., Seattle, 1987, pp. 3–15.
7. G. Thomas, V. Ramachandra, R. Ganeshan, and R. Vasudesan: J. Mater. Sci., 1993, vol. 28, pp. 4892–99.10.1007/BF00361152 ↗
8. C.M. Banas: NASA CR-132386, NASA, Arlington, VA, Mar. 1974.
9. F.E. Tret’Yakov and A.I. Gorshkov: Welding Production, 1963, vol. 16 (9), pp. 32–37.
10. V.N. Zamkov and A.D. Shevelev: Avt. Svarka, 1979, No. 12, pp. 50–54 and 57.
11. A.I. Gorshkov: Welding Production, 1965, vol. 12 (4), pp. 47–53.
12. A.N. Khatuntsev: Welding Production, 1968, No. 7, pp. 19–21.
13. F.R. Kulikov: Svar. Proiz., 1975, No. 11, pp. 26–31.10.1002/pssa.2210310102 ↗
14. G.L. Petrov and A.N. Khanutsev: Svar. Proiz., 1975, No. 8, pp. 57–58.
15. A.D. Ivannikova and A.A. Erokhin: Svar. Proiz., 1968, No. 2, pp. 9–11.
16. D.R. Mitchell: Welding J., Welding Res. Suppl., 1965, Apr., pp. 157–67.
17. V.I. Marav’ev, S.P. Mazur, B.N. Mar’in, B.I. Dolotov, Y. Livanov, and KA. Maravov: Welding Int., 1998, vol. 12 (5), pp. 410–16.10.1080/09507119809448509 ↗
18. A.N. Senin and A.P. Sukhorukov: Welding Production, 1963, vol. 16 (12), pp. 42–47.
19. F.E. Tret’Yakov and A.I. Gorshkov: Welding Production, 1963, vol. 10 (4), pp. 42–48.
20. A.I. Gorshkov: Svar. Proizvod., 1968, No. 7, pp. 21–23.10.1063/1.3034816 ↗
21. V.V. Redchits: Welding Int., 1997, vol. 42 (3), pp. 722–728.10.1080/09507119709448951 ↗
22. V.I. Lakomskii and N.N. Kalyniuk: Avt. Svarka, 1963, No. 9, pp. 31–35.10.1108/eb033679 ↗
23. J. Philibert, A. Vignes, Y. Bréchet, and P. Combrade: Métallurgie, du Mineari au Métal, Masson, Paris, 1997.
24. P. Waldner and G. Eriksson: CALPHAD, 1999, vol. 23 (2), pp. 189–218.10.1016/S0364-5916(99)00025-5 ↗
25. H.A. Friedrichs, L.W. Ronkow, and P. Vermot: Steel Res., 1995, vol. 66 (12), pp. 509–15.10.1002/srin.199501163 ↗
26. E. Ollivier and R. Charles: EADS internal Report No. DCR/M 1999-65066/01, 2000.
27. H. Guégan: “Detection et Dosage de l’Hydrogène dans les Solides par l’Analyse des Noyaux de Recul,” Document No. ARCANE-ADERA.
28. G. Revel and J.-P. Duraud: Techniques de l’Ingénieur, 2000, vol. P2563, pp. 1–17.
29. G.E. Lozeev, A.I. Chernitsyn, and V.V. Frolov: Avt. Svarka, 1977, No. 2, pp. 25–30.
30. V.V. Redchits: Svar. Proizvod., 1981, No. 6, pp. 41–44.
31. V.V. Redchits: Avtom. Svarka, 1991, No. 6, pp. 31–34.
32. V.V. Redchits and V.A. Frolov: Svar. Proizvod., 1995, No. 8, pp. 24–26.
33. V.V. Redchits: Svar. Proizvod., 1995, No. 7, pp. 35–38.
34. Access at MCWASP 2000.
35. C. Avare: Ph.D. Thesis, EPM-MADYLAM, Institut National Polytechnique de Grenoble, Grenoble, 1995.
36. R.J. Wasilewski and G.L. Kehl: Metallurgia, 1954, Nov., pp. 225–30.
37. Z. Liu and G. Welsch: Metall. Trans. A, 1991, vol. 22A, pp. 946–48.10.1007/BF02659006 ↗
38. Z. Liu and G. Welsch, F.R. Young: Cavitation, McGraw-Hill, New York, NY, 1989.
39. J. Szekely and N.J. Themelis: Rate Phenomena in Process Metallurgy, Wiley Interscience, New York, NY, 1970.
40. R. Clift, J.R. Grace, and M.E. Weber: Bubbles, Drops and Particles, Academic Press, New York, NY, 1978.
41. N. Gouret: Ph.D. Thesis, CROMeP-Ecole des Mines d’Albi-Carmaux, Ecole des Mines de Paris, Paris, 2001.