journal article·2014-02

Transformation Characteristics of Ferrite/Carbide Aggregate in Continuously Cooled, Low Carbon-Manganese Steels

S. F. Di Martino, G. Thewlis

Publisher page

Abstract

Transformation characteristics and morphological features of ferrite/carbide aggregate (FCA) in low carbon-manganese steels have been investigated. Work shows that FCA has neither the lamellae structure of pearlite nor the lath structure of bainite and martensite. It consists of a fine dispersion of cementite particles in a smooth ferrite matrix. Carbide morphologies range from arrays of globular particles or short fibers to extended, branched, and densely interconnected fibers. Work demonstrates that FCA forms over similar cooling rate ranges to Widmanstatten ferrite. Rapid transformation of both phases occurs at temperatures between 798 K and 973 K (525 °C and 700 °C). FCA reaction is not simultaneous with Widmanstatten ferrite but occurs at temperatures intermediate between Widmanstatten ferrite and bainite. Austenite carbon content calculations verify that cementite precipitation is thermodynamically possible at FCA reaction temperatures without bainite formation. The pattern of precipitation is confirmed to be discontinuous. CCT diagrams have been constructed that incorporate FCA. At low steel manganese content, Widmanstatten ferrite and bainite bay sizes are significantly reduced so that large amounts of FCA are formed over a wide range of cooling rates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. C.A. Dubé, H.I. Aaronson and R.F. Mehl: Rev. Met., 1958, 55, p201.10.1051/metal/195855030201 ↗
2. H.I. Aaronson: ‘Decomposition of Austenite by Diffusional Processes’, AIME, Philadelphia, 1960, p389.
3. International Institute of Welding: Compendium of Weld Metal Microstructures and Properties, Woodhead Publishing, Abington, 1985.
4. E. Anelli and P.E. Di-Nunzio: Classification of Microstructures of Low Carbon Steels: Preparation of a Set of Standard Micrographs, ECSC Agreement No. 7210-EC/405 (94-D3.02a), CSM, June 1996.
5. G. Thewlis: Mater. Sci. Technol., 2004, 20,143-160.10.1179/026708304225010325 ↗
6. Lemaire E, Copreaux J, Roch F: Scripta Materialia, 1996, 35, (1), 83-89.10.1016/1359-6462(96)00082-6 ↗
7. E. Keehan, L. Karlsson, H.O. Andren, and H.K.D.H. Bhadeshia: Proc. Int. Conf. Trends Weld. Res., ASM International, 2005, pp. 969–74.
8. J.H. Pak, H.K.D.H. Bhaseshia, L. Karlsson and E. Keehan: Science and Technology of Welding and Joining, 2008, Vol. 13, No. 7, 593-597.10.1179/136217108X338926 ↗
9. P.L. Harrison: PhD Thesis, University of Southampton, UK, 1982.
10. T. Furuharat, T. Moritani, K. Sakamoto and T. Maki: Mater. Sci. Forum, 2007, Vol. 539-43 (5), pp 4832-4837.10.4028/www.scientific.net/MSF.539-543.4832 ↗
11. C.M. Bae, C.S. Lee and W.J. Nam: Mater. Sci. Technol., 2002, 18, 1317.10.1179/026708302225007556 ↗
12. F.H. Samuel: Trans. Iron Steel Inst. Japan, 1983, Vol. 23, No 5, 403-409.10.2355/isijinternational1966.23.403 ↗
13. Materials Algorithms Project Program Library: Department of Materials Science and Metallurgy, Cambridge University, at http://www.msm.cam.ac.uk/map/.
14. R.H. Davies, A.T. Dinsdale, J.A. Gisby, J.A.J. Robinson, S.M. Martin, CALPHAD, 2002, 26(2), pp. 229-271.10.1016/S0364-5916(02)00036-6 ↗
15. H.K.D.H. Bhadeshia: ‘Bainite in steels’, 1st edn; 1992, London, The Institute of Materials.
16. M. Takahashi and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1990, vol. 6, p. 592.10.1179/026708390790191521 ↗
17. J.W. Christian: Theory of Transformations in Metals and Alloys Part 1, 2nd ed., Pergamon Press, Oxford, 1975.