Influence of Chemical Composition of Mg Alloys on Surface Alloying by Diffusion Coating
Source abstract
Abstract
A recently developed technique of surface alloying by diffusion-coating has been used to produce coatings on Mg alloys with various Al and Zn contents. The experimental results show that both Al and Zn solutes in the alloy promote the diffusion of alloying elements through grain refinement of the substrate alloys and through reduction of diffusion active energy because of the reduction of melting temperature of the alloys. Therefore, the efficiency of surface alloying increases by diffusion coating. Thick, dense, uniform, and continuous layers of intermetallic compounds, which consist of a τ-phase layer and a β-phase layer, can be produced on the surface of various Mg alloys. The intermetallic compound layers not only have microhardness values that are 4 to 6 times higher than the substrate but also provide effective protection of the Mg alloys from corrosion in 5 pct NaCl solution at room temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. M.K. Kulekci: Int. J. Adv. Manuf. Technol., 2008, vol. 39, p. 851.10.1007/s00170-007-1279-2 ↗
2. Z.-H. Chen and J.-H. Chen: Front. Mater. Sci. China, 2008, vol. 2, p. 1.10.1007/s11706-008-0001-0 ↗
3. X. Liu: Surf. Coat. Technol., 2000, vol. 131, p. 261.10.1016/S0257-8972(00)00791-X ↗
4. J.E. Gray and B. Luan: J. Alloys Compd., 2002, vol. 336, p. 88.10.1016/S0925-8388(01)01899-0 ↗
5. Y. Xin, K. Huo, T. Hu, G. Tang, and P.K. Chu: Thin Solid Films, 2009, vol. 517, p. 5357.10.1016/j.tsf.2009.03.101 ↗
6. Z. Yong, J. Zhu, C. Qiu, and Y. Liu: Appl. Surf. Sci., 2008, vol. 255, p. 1672.10.1016/j.apsusc.2008.04.095 ↗
7. H.-Y. Hsiao and W.-T. Tsai: Surf. Coat. Technol., 2005, vol. 190, p. 299.10.1016/j.surfcoat.2004.03.010 ↗
8. Z. Liu and W. Gao: Surf. Coat. Technol., 2006, vol. 200, p. 5087.10.1016/j.surfcoat.2005.05.023 ↗
9. Y. Gao, C. Wang, H. Pang, H. Liu, and M. Yao: Appl. Surf. Sci., 2007, vol. 253, p. 4917.10.1016/j.apsusc.2006.10.075 ↗
10. H. Huo, Y. Li, and F. Wang: Corros. Sci., 2004, vol. 46, p. 1467.10.1016/j.corsci.2003.09.023 ↗
11. H. Luo, Q. Cai, J. He, and B. Wei: Current Appl. Phys., 2009, vol. 9, p. 1341.10.1016/j.cap.2009.02.017 ↗
12. Y.-L. Gao, C.S. Wang, M. Yao, and H.-B. Liu: Appl. Surf. Sci., 2007, vol. 253, p. 5306.10.1016/j.apsusc.2006.12.001 ↗
13. Y.W. Song, D.Y. Shan, and E.H. Han: Electrochim. Acta, 2008, vol. 53, p. 2135.10.1016/j.electacta.2007.09.026 ↗
14. J. Hirmke, M.-X. Zhang, and D.H. St John: Surf. Coat. Technol., 2011, vol. 206, nos. 2,3, pp. 425–33.10.1016/j.surfcoat.2011.07.050 ↗
15. H. Yang, X. Guo, G. Wu, J. Ding, and N. Birbilis: Corros. Sci., 2011, vol. 53, p. 381.10.1016/j.corsci.2010.09.047 ↗
16. M. He, L. Liu, Y. Wu, Z. Tang, and W. Hu: J. Coat. Technol. Res., 2009, vol. 6, p. 407.10.1007/s11998-008-9132-6 ↗
17. M.-X. Zhang, H. Huang, K. Spencer, and Y.-N. Shi: Surf. Coat. Technol., 2010, vol. 204, p. 2118.10.1016/j.surfcoat.2009.11.031 ↗
18. H.Q. Sun, Y.N. Shi, M.-X. Zhang, and K. Lu: Surf. Coat. Technol., 2008, vol. 202, p. 3947.10.1016/j.surfcoat.2008.02.010 ↗
19. N. Pebere, C. Riera, and F. Dabosi: Electrochim. Acta, 1990, vol. 35, p. 555.10.1016/0013-4686(90)87043-2 ↗
20. G.L. Song and A. Atrens: Adv. Eng. Mater., 1999, vol. 1, p. 11.10.1002/(SICI)1527-2648(199909)1:1<11::AID-ADEM11>3.0.CO;2-N ↗
21. I. Shigematsu, M. Nakamura, N. Saitou, and K. Shimojima: J. Mater. Sci. Lett., 2000, vol. 19, p. 473.10.1023/A:1006737200466 ↗
22. H. Huo, F. Wang, Y. Li, and J. Xu: Corr. Sci. Prot. Technol., 2001, vol. 13, p. 484.
23. Y. Ma, W. Wen, P. Liu, and X. He: Surf. Eng., 2004, vol. 20, p. 108.10.1179/026708404225014898 ↗
24. Y. Ma, K. Xu, W. Wen, X. He, and P. Liu: Surf. Coat. Technol., 2005, vol. 190, p. 165.10.1016/j.surfcoat.2004.08.214 ↗
25. F. Liu, W. Liang, X. Li, X. Zhao, Y. Zhang, and H. Wang: J. Alloys Compd., 2008, vol. 461, p. 399.10.1016/j.jallcom.2007.06.097 ↗
26. M.-X. Zhang, and P.M. Kelly: J. Mater. Res., 2002, vol. 17, p. 2477.10.1557/JMR.2002.0360 ↗
27. L. Zhu and G. Song: Surf. Coat. Technol., 2006, vol. 200, p. 2834.10.1016/j.surfcoat.2004.11.042 ↗
28. M.-X. Zhang, Y.-N. Shi, H.Q. Sun, and P.M. Kelly: J. Nanosci. Nanotechnol., 2007, vol. 8, p. 1.
29. D.H. St. John, M. Qian, M.A. Easton, P. Cao, and Z. Hildebrand: Metall. Mater. Trans. A, 2005, vol. 36A, p. 1669.10.1007/s11661-005-0030-6 ↗
30. A.K. Dahle, Y.C. Lee, M.D. Nave, P.L. Schffer, and D.H. St John: J. Light Met., 2001, vol. 1, p. 61.10.1016/S1471-5317(00)00007-9 ↗
31. P. Liang, T. Tarfa, J.A. Robinson, S. Wagner, P. Ochin, M.G. Harmelin, H.J. Seifert, H.L. Lukas, and F. Aldinger: Thermochim. Acta, 1998, vol. 314, p. 87.10.1016/S0040-6031(97)00458-9 ↗
32. P. Donnadieu, A. Quivy, T. Tarfa, P. Ochin, A. Dezellus, M.G. Harmelin, P. Liang, H.L. Lukas, H.J. Seifert, F. Aldinger, and G. Effenberg: Z. Metall., 1997, vol. 188, p. 911.
33. R. Abbaschian, L. Abbaschian, and R.E. Reed-Hill: Physical Metallurgy Principle, 4th ed., Cengage Learning, Stamford, CT, 2009, pp. 372-80.