On the Micromechanism of Fatigue Damage in an Interstitial-Free Steel Sheet
Source abstract
Abstract
The micromechanism of fatigue damage in an interstitial-free (IF) steel sheet has been studied using fully reversed stress amplitudes (Δσ/2). The stress-life (S-N) curve of the steel sheet has been generated, together with a series of interrupted fatigue tests at each of the chosen Δσ/2, to study the progress of fatigue damage in terms of the initiation, growth, and coalescence of the fatigue cracks on the surfaces of the sheet specimens using scanning electron microscopy. The steel sheet possesses a higher endurance limit (0.98 times its yield strength (YS)), as compared to conventional low-carbon steel sheets. This is attributed to (1) the occurrence of nonpropagating microcracks initiating primarily at the inclusions below the endurance limit and (2) a significant delay in the spread of plastic deformation, until Δσ/2 is close to YS. Above the endurance limit, widespread plastic deformation through slip bands promotes the formation of fatigue cracks at the ferrite grain boundaries and occasionally within a ferrite grain body, as well as at inclusions. Fatigue failure is preceded by the significant growth of grain-boundary cracks over and above those at inclusions and the ferrite grain body. A series of grain-boundary cracks link up to form mesocracks, one of which grows to cause the final failure. The predominance of grain-boundary cracks in the process of fatigue failure is attributed to the lesser cohesive strength of the grain boundaries caused by the depletion of interstitials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. I. Gupta, D. Bhattacharya: in Metallurgy of Vacuum Degassed Steel Products, R. Pradhan, ed., TMS, Warrendale, PA, 1990, pp. 43–72
2. Y. Tokunaga: in Metallurgy of Vacuum Degassed Steel Products, R. Pradhan, ed., TMS, Warrendale, PA, 1990, pp. 91–108
3. M.T. Milan, D. Spinelli, W.W. Bose Filho: Int. J. Fatigue, 2001, vol. 23, pp. 129–3310.1016/S0142-1123(00)00076-1 ↗
4. G.E. Dieter: Mechanical Metallurgy, SI Metric ed., McGraw Hill Publishing Co., London, 1988, pp. 394–98
5. ASM Handbook, vol. 19, Fatigue and Fracture, 9th ed., ASM INTERNATIONAL, Metals Park, OH, 1996, pp. 96–98
6. C. Holzapfel, W. Schaf, M. Marx, H. Vehoff, F. Mucklich: Scripta Mater., 2007, vol. 56, pp. 697–70010.1016/j.scriptamat.2006.12.025 ↗
7. ASM Handbook, vol. 19, Fatigue and Fracture, 9th ed., ASM INTERNATIONAL, Metals Park, OH, 1996, pp. 153–54
8. Microscopic Testing Method for the Non-Metallic Inclusions of Steels, Japanese Standard JISG-0555, 1992
9. S. Majumdar: Tata Search, 2007, vol. 2, pp. 295–98
10. Standard Test Methods for Tension Testing of Metallic Materials (Metric), ASTM Designation E 8M-04, ASTM, Philadelphia, PA, 2004, pp. 86–109
11. Standard Test Methods for Tension Testing of Metallic Materials (Metric), ASTM Designation E 8M-04, ASTM, Philadelphia, PA, 2004, pp. 86–109
12. H.J. Christ, H. Mughrabi, C. Witting-Link: Basic Mechanism in Fatigue of Metals, 1st ed., Elsevier, Amsterdam, 1988, pp. 83–84
13. M. Zhang, P. Yang, Y. Tan: Int. J. Fatigue, 1999, vol. 21, pp. 823–3010.1016/S0142-1123(99)00031-6 ↗
14. Y.M. Hu, W. Floer, U. Krupp, H.-J. Christ: Mater. Sci. Eng., A, 2000, vol. 278, pp. 170–8010.1016/S0921-5093(99)00575-4 ↗
15. R.E. Hook, J.P. Hirth: Acta Metall., 1967, vol. 15, pp. 1099–11010.1016/0001-6160(67)90383-5 ↗
16. P. Sittner, V. Paidar: Acta Metall., 1989, vol. 37, pp. 1717–2610.1016/0001-6160(89)90057-6 ↗
17. N. Narasaiah, P.C. Chakraborti, R. Maiti, K.K. Ray: ISIJ Int., 2005, vol. 45, pp. 127–3210.2355/isijinternational.45.127 ↗
18. U. Essman, U. Gosele, H. Mughrabi: Philos. Mag, 1981, vol. 44, pp. 405–2610.1080/01418618108239541 ↗
19. A. Hunche, P. Neuman: Acta Metall., 1986, vol. 34, pp. 207–1710.1016/0001-6160(86)90192-6 ↗
20. M. Long, R. Crooks, H.J. Rack: Acta Mater., 1999, vol. 47, pp. 661–6910.1016/S1359-6454(98)00343-7 ↗
21. H.O. Fuchs, R.I. Stephens: Metal Fatigue in Engineering, John Wiley & Sons, New York, NY, 1980, pp. 296–98
22. G.E. Dieter: Mechanical Metallurgy, SI Metric ed., McGraw Hill Publishing Co. Place, London, 1988, pp. 418–19
23. L. Nian, D. Bai-ping, Z. Hui-jiu: Int. J. Fatigue, 1984, vol. 6 (2), pp. 89–9410.1016/0142-1123(84)90018-5 ↗
24. P. Lukas, M. Klesnil: Mater. Sci. Eng., 1978, vol. 34, pp. 61–6610.1016/0025-5416(78)90009-5 ↗
25. G. Oates, D.V. Wilsons: Acta Metall., 1964, vol. 12, pp. 21–3310.1016/0001-6160(64)90050-1 ↗
26. G.E. Dieter: Mechanical Metallurgy, SI Metric Edition, McGraw Hill Publishing Co. Place, London, 1988, pp. 197–98
27. P.G. Forrest: Fatigue of Metals, 2nd ed., Addison Wesley Publishing Company, Inc., London, 1962, pp. 146–47
28. J.C. Suits, B. Chalmers: Acta Metall., 1961, vol. 9, pp. 854–6010.1016/0001-6160(61)90189-4 ↗
29. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 4th ed., John Wiley & Sons, Inc., New York, NY, 1995, pp. 529–30
30. B. Yan: Proc. 37th MWSP Conf., The Iron and Steel Society Inc., Warrendale, PA, 1996, vol. XXXIII, pp. 101–14
31. F.B. Pickering: Physical Metallurgy and the Design of Steel, Applied Science Publishers Ltd., London, 1978, pp. 18–20
32. J.W. Cahn: Acta Metall., 1962, vol.10, pp. 789–9910.1016/0001-6160(62)90092-5 ↗
33. W.H. Kim, C. Laird: Acta Metall., 1978, vol. 26, pp. 777–8710.1016/0001-6160(78)90028-7 ↗
34. J.C. Figueroa, C. Laird: Mater. Sci. Eng., 1983, vol. 60, pp. 45–5810.1016/0025-5416(83)90076-9 ↗
35. F. Guiu, R. Dubniak, R.C. Edward: Fatigue Fract. Eng. Mater. Struct., 1982, vol. 5, pp. 311–2110.1111/j.1460-2695.1982.tb01240.x ↗
36. H. Mugrhabi, K. Herze, X. Stark: Int. J. Fract., 1981, vol. 17, pp. 193–22010.1007/BF00053520 ↗
37. K. Tanaka, Y. Akinawa, In Fatigue 87, EMAS, Warley, UK, p.739–49, 1987