journal article·2010-10

Aging Effect on Texture Evolution during Warm Rolling of ZK60 Alloys Fabricated by Twin-Roll Casting

Jae-Hyung Cho, Hong-Mei Chen, Shi-Hoon Choi, Hyoung-Wook Kim, Suk-Bong Kang

Publisher page

Abstract

ZK60(Mg-Zn-Zr) alloys experience variation of precipitates during aging. The frequency and size of rod- and disk-shaped precipitates change with aging. The effect of aging on texture evolution during warm rolling of ZK60 was investigated. Some difference was found between the texture evolution of solution heat-treated (T4) and artificially aged (T6) samples. The Aged samples had more texture variations along the thickness direction than solution heat-treated samples. The intensities of basal fibers were lower during asymmetric rolling than during symmetric rolling, although the initial intensities increased during both rolling processes. The decrease in basal fibers by asymmetric rolling was clearer at a lower temperature of 448 K (175 °C) than at 498 K (225 °C).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. L.Y. Wei, G.L. Dunlop, and H. Westengen: Metall. Trans. A, 1995, vol. 26A, pp. 1947–55.10.1007/BF02670666 ↗
2. L.Y. Wei, G.L. Dunlop, and H. Westengen: Metall. Trans. A, 1995, vol. 26A, pp. 1705–16.10.1007/BF02670757 ↗
3. X. Gao and J.F. Nie: Scripta. Mater., 2007, vol. 56, no. 8, pp. 645–48.10.1016/j.scriptamat.2007.01.006 ↗
4. S.M. He, L.M. Peng, X.Q. Zeng, W.J. Ding, and Y.P. Zhu: Mater. Sci. Eng. A, 2006, vol. A433, pp. 175–81.
5. D.K. Xu, L. Liu, Y.B. Xu, and E.H. Han: Mater. Sci. Eng. A, 2006, vol. A420, pp. 322–32.
6. J.H. Cho, Y.M. Jin, H.W. Kim, and S.B. Kang: Mater. Sci. Forum, 2007, vol. 558–559, pp. 159–64.10.4028/www.scientific.net/MSF.558-559.159 ↗
7. H. Chen, S.B. Kang, H. Yua, J.H. Cho, H.W. Kim, and G. Mina: J. Alloys Compd., 2009, vol. 476, pp. 324–28.10.1016/j.jallcom.2008.08.077 ↗
8. D.Y. Maeng, T.S. Kim, J.H. Lee, S.J. Hong, S.K. Seo, and B.S. Chun: Scripta Mater., 2000, vol. 43, pp. 385–89.10.1016/S1359-6462(00)00428-0 ↗
9. A. Galiyev, R. Kaibyshev, and G. Gottstein: Scripta Mater., 2005, vol. 53, pp. 675–79.10.1016/j.scriptamat.2005.05.030 ↗
10. C.Y. Wang, X.J. Wang, H. Chang, K. Wu, and M.Y. Zheng: Mater. Sci. Eng. A, 2007, vol. 464, pp. 52–58.10.1016/j.msea.2007.03.003 ↗
11. Y.Q. Yang, B.C. Li, and Z.M. Zhang: Mater. Sci. Eng. A, 2009, vol. 499, pp. 238–41.10.1016/j.msea.2007.11.106 ↗
12. Z. Liu, S. Bai, and S.B. Kang: Scripta Mater., 2009, vol. 60, pp. 403–06.10.1016/j.scriptamat.2008.11.023 ↗
13. F. Humphreys and M. Hatherly: Recrystallization and related annealing phenomena, Elsevier, Oxford, UK, 2004, pp. 437–41.
14. H. Watanabe, T. Mukai, and K. Ishikawa: J. Mater. Sci., 2004, vol. 39, pp. 1477–80.10.1023/B:JMSC.0000013922.16079.d3 ↗
15. H. Watanabe, T. Mukai, and K. Ishikawa: J. Mater. Proc. Tech., 2007, vol. 182, pp. 644–47.10.1016/j.jmatprotec.2006.08.010 ↗
16. S.H. Kim, B.S. You, C.D. Yim, and Y.M. Seo: Mater. Lett., 2005, vol. 59, pp. 3876–80.10.1016/j.matlet.2005.07.024 ↗
17. Y. Chino, M. Mabuchi, Y. Kishihara, H. Hosokawa, Y. Yamada, C. Wen, K. Shimojima, and H. Iwasaki: J. Alloys Compd., 2008, vol. 457, pp. 408–12.10.1016/j.jallcom.2007.02.144 ↗
18. Y. Chino, M. Mabuchi, Y. Kishihara, H. Hosokawa, Y. Yamada, C. Wen, K. Shimojima, and H. Iwasaki: Mater. Trans., 2002, vol. 43, no. 10, pp. 2554–60.10.2320/matertrans.43.2554 ↗
19. S. Matthies and G.W. Vinel: Phys. Stat. Sol.(B), 1982, vol. 112, p. 111.10.1002/pssb.2221120254 ↗
20. S. Matthies, G.W. Vinel, and K. Helming: Standard Distribution in Texture Analysis, Akademie-Verlag, Berlin, Germany, 1987.10.1515/9783112736173 ↗
21. J.H. Cho, A.D. Rollett, and K.H. Oh: Metall. Mater. Trans. A, vol. 36A, pp. 3427–38.10.1007/s11661-005-0016-4 ↗
22. H. Chen, S.B. Kan, H. Yua, H.W. Kim, and G. Mina: Mater. Sci. Eng. A, 2008, vol. 492, pp. 317–27.10.1016/j.msea.2008.03.035 ↗
23. J.H. Cho, A.D. Rollett, and K.H. Oh: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1075–86.10.1007/s11661-004-1010-y ↗
24. T. Al-Samman and G. Gottstein: Mater. Sci. Eng. A., 2008, vol. 490, pp. 411–20.10.1016/j.msea.2008.02.004 ↗
25. T. Al-Samman, G. Gottstein: Mater. Sci. Forum, 2007, vol. 539–543, pp. 3401–06.10.4028/www.scientific.net/MSF.539-543.3401 ↗
26. M.J. Philippe: Mater. Sci. Forum, 1994, vol. 157–162, pp. 1337–50.10.4028/www.scientific.net/MSF.157-162.1337 ↗
27. L. Mackenzie and M. Pekguleryuz: Mater. Sci. Eng. A, 2008, vol. 480, pp. 189–97.10.1016/j.msea.2007.07.003 ↗
28. K.-H. Kim, B.-C. Suh, J.H. Bae, M.-S. Shim, S. Kim, and N.J. Kim: Scripta. Mater., in press.
29. G.E. Dieter: Mechanical Metallurgy, McGraw-Hill, New York, NY, 1988.
30. L. Remy: Metall. Trans. A, 1981, vol. 12A, pp. 387.10.1007/BF02648536 ↗