journal article·2014-02

Experimental Investigation of Three-Dimensional (3-D) Material Flow Pattern in Thick Dissimilar 2050 Friction-Stir Welds

Marie-Noëlle Avettand-Fènoël, Roland Taillard, Julien Laye, Thierry Odièvre

Publisher page

Abstract

The current microstructural investigation performed at various scales deals with the three-dimensional (3-D) material flow in thick dissimilar Airware™ 2050 friction-stir butt welds (Airware, Newport Beach, CA) because of the scarcity of the results obtained with thicker than 8 mm joints and the lack of detailed interpretation of features in the longitudinal direction. An additional originality consists in the study of material flow under the probe tip. In the current case of thick plates, the variation of local temperature along the weld depth is of key importance for the material flow. Indeed, it governs the slight difference of local mechanical behavior between both materials and therefore the shift of the interface, which was clearly put into evidence by means of a difference of Mn content as small as 0.3 pct between both alloys. This importance of temperature for the malleability also entails the pear shape of the nugget as well as a change of grains orientation along the depth in the thermomechanically affected zone. Due to the modification of tool-material adhesion with temperature, a new phenomenological model of material flow for thick friction-stir welds is proposed. In accordance with their difference of origin, the coexistence of onion rings and serrated interface is also highlighted.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. D.P. Yan: Master’s Thesis, Auckland University of Technology, 2008.
2. Y. Li, L.E. Murr, and J.C. McClure: Mater. Sci. Eng., 1999, vol. A271, pp. 213-23.10.1016/S0921-5093(99)00204-X ↗
3. T.U. Seidel and A.P. Reynolds: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2879-84.10.1007/s11661-001-1038-1 ↗
4. G. Buffa, J. Hua, R. Shivpuri, and L. Fratini: Mater. Sci. Eng., 2006, vol. A419, pp. 381-8.10.1016/j.msea.2005.09.041 ↗
5. A. Simar, Y. Bréchet, B. de Meester, A. Denquin, C. Gallais, and T. Pardoen: Prog. Mater. Sci., 2012, vol. 57, pp. 95-183.10.1016/j.pmatsci.2011.05.003 ↗
6. R.S. Mishra and M.W. Mahoney: Friction Stir Welding and Processing, ASM, Materials Park, OH, 2007.
7. S. Xu and X. Deng: Acta Mater., 2008, vol. 56, pp. 1326-41.10.1016/j.actamat.2007.11.016 ↗
8. M. Guerra, C. Schmidt, J.C. McClure, L.E. Murr, and A.C. Nunes: Mater. Charact., 2003, vol. 49, pp. 95-101.10.1016/S1044-5803(02)00362-5 ↗
9. S. Horie, K. Shinozaki, M. Yamamoto, and T.H. North: Sci. Technol. Weld. Join., 2010, vol. 15, no. 8, pp. 666-70.10.1179/136217110X12785889550145 ↗
10. O. Lorrain, V. Favier, H. Zahrouni, and D. Lawrjaniec: J. Mater. Proc. Technol., 2010, vol. 210, pp. 603-9.10.1016/j.jmatprotec.2009.11.005 ↗
11. F. Gratecap, M. Girard, S. Marya, and G. Racineux: Int. J. Mater. Form., 2011.
12. H.N.B. Schmidt, T.L. Dickerson, and J.H. Hattel: Acta Mater., 2006, vol. 54, pp. 1199-209.10.1016/j.actamat.2005.10.052 ↗
13. Y. Morisada, H. Fujii, Y. Kawahito, K. Nakata, and M. Tanaka: Scripta Mater., 2011, vol. 65, pp. 1085-8.10.1016/j.scriptamat.2011.09.021 ↗
14. I. Galvao, R.M. Leal, D.M. Rodriguez, and A. Loureiro: Sci. Technol. Weld. Join., 2010, vol. 15, no. 8, pp. 654-60.10.1179/136217110X12785889550109 ↗
15. L.E. Murr: J. Mater. Eng. Perf., 2010, vol. 19, no. 8, pp. 1071-89.10.1007/s11665-010-9598-0 ↗
16. R. Nandan, T. DebRoy, and H.K.D.H. Bhadeshia: Prog. Mater. Sci., 2008, vol. 53, pp. 980-1023.10.1016/j.pmatsci.2008.05.001 ↗
17. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50 (1–2), pp. 1–78.10.1016/j.mser.2005.07.001 ↗
18. B.C. Liechty and B.W Webb: J. Mater. Proc. Technol., 2008, vol. 208, pp. 431-43.10.1016/j.jmatprotec.2008.01.008 ↗
19. T.R. McNelley, S. Swaminathan, and J.Q. Su: Scripta Mater., 2008, vol. 58, pp. 349-54.10.1016/j.scriptamat.2007.09.064 ↗
20. G. Pouget and A. Reynolds: Int. J. Fatigue, 2008, vol. 30, pp. 463-72.10.1016/j.ijfatigue.2007.04.016 ↗
21. Z.W. Chen and S. Cui: Scripta Mater., 2008, vol. 58, pp. 417-20.10.1016/j.scriptamat.2007.10.026 ↗
22. Z.W. Chen, T. Pasang, and Y. Qi: Mater. Sci. Eng. A, 2008, vol. 474, pp. 312-6.10.1016/j.msea.2007.05.074 ↗
23. R.W. Fonda, K.E. Knipling, and J.F. Bingert: Scripta Mater., 2007, vol. 58, pp. 343-8.10.1016/j.scriptamat.2007.09.063 ↗
24. Z.W. Chen and S. Cui: Trans. Nonferrous Met. Soc. China, 2007, vol. 17, s258-61.
25. P. Alvarez, G. Janeiro, A.A.M. Da Silva., E. Aldanondo, and A. Echeverría: Sci. Technol. Weld. Join., 2010, vol. 15, no. 8, pp. 648-53.10.1179/136217110X12785889549543 ↗
26. K.J. Colligan: 1st International FSW Symposium, Thousand Oaks, CA, 1999.
27. S.T. Amancio-Filho, S. Sheikhi, J.F. Dos Santos, and C. Bolfarini: J. Mater. Process. Technol., 2008, vol. 206, pp. 132-42.10.1016/j.jmatprotec.2007.12.008 ↗
28. R. Zettler, S. Lomolino, J.F. Dos Santos, T. Donath, F. Beckmann, T. Lipman, and D. Lohwasser: 5 th International FSW Symposium, Metz, France, 2004.
29. J.A. Schneider and A.C. Nunes: Metall. Mater. Trans. B, 2004, vol. 35, pp. 777-83.10.1007/s11663-004-0018-4 ↗
30. M. Sarvghad Mogghadam, R. Parzivi, M. Haddad-Sabzevar, and A. Davoodi: Mater. Des., 2011, vol. 32, pp. 2749-55.10.1016/j.matdes.2011.01.015 ↗
31. K.N. Krishnan: Mater. Sci. Eng., 2002, vol. A327, pp. 246-51.10.1016/S0921-5093(01)01474-5 ↗
32. L.E. Murr, Y. Li, R.D. Flores, E.A. Trillo, and J.C. McClure: Mater. Res. Innov., 1998, vol. 2, pp. 150-63.10.1007/s100190050078 ↗
33. K. Kumar and S.V. Kailas: Mater. Sci. Eng. A, 2008, vol. 485, pp. 367-74.10.1016/j.msea.2007.08.013 ↗
34. T. Watanabe, H. Takayama, and A. Yanagisawa: J. Mater. Process. Technol., 2006, vol. 178, pp. 342-9.10.1016/j.jmatprotec.2006.04.117 ↗
35. Y. Li, L.E. Murr, and J.C. McClure: Scripta Mater., 1999, vol. 40, no. 9, pp. 1041-6.10.1016/S1359-6462(99)00062-7 ↗
36. R.S. Coelho, A. Kostka, J.F. Dos Santos, and A.R. Pyzalla: Adv. Eng. Mater., 2008, vol. 10, no. 12, pp. 1127-33.10.1002/adem.200800227 ↗
37. A. Sullivan and J.D. Robson: Mater. Sci. Eng. A, 2008, vol. 478, pp. 351-60.10.1016/j.msea.2007.06.025 ↗
38. P.L. Threadgill, A.J. Leonard, H.R. Shercliff, and P.J. Withers: Int. Mater. Rev., 2009, vol. 54, no. 2, pp. 49-93.10.1179/174328009X411136 ↗
39. Z. Zhang and H.W. Zhang: J. Mater. Proc. Technol., 2009, vol. 209, pp. 241-70.10.1016/j.jmatprotec.2008.01.044 ↗
40. D. Jacquin, C. Desrayaud, and F. Montheillet: Mater. Sci. Forum, 2007, vols. 539–543, pp. 3832–37.10.4028/www.scientific.net/MSF.539-543.3832 ↗
41. A. Gerlich, P. Su, M. Yamamoto, and T.H. North: Sci. Technol. Weld. Join., 2008, vol. 13, no. 3, pp. 254-64.10.1179/174329308X283910 ↗
42. M. Grujicic, G. Arakere, J-M. Panrdurangan, J-M. Ochterbeck, C-F. Yen, B.A. Cheesseman, A.P. Reynolds, and M.A. Sutton: J. Mater. Eng. Perform., 2012, vol. 21 (9), pp. 1824–40.10.1007/s11665-011-0069-z ↗
43. S. Muthukumaran and S.K. Mukherjee: Int. J. Adv. Manuf. Technol., 2008, vol. 38, pp. 68-73.10.1007/s00170-007-1071-3 ↗
44. W.J. Arbegast: Scripta Mater., 2008, vol. 58, pp. 372-6.10.1016/j.scriptamat.2007.10.031 ↗
45. H. Larsson, L. Karlsson, and L.E. Svensson (ESAB-Volvo): www.esab.co.uk, 2000.
46. S. Muthukumaran and SK Mukherjee: Sci. Technol. Weld. Join., 2006, vol. 11, pp. 337-40.10.1179/174329306X107665 ↗
47. Z. Zhang, J.T. Chen, Z.W. Zhang, and H.W. Zhang: J. Mater. Sci., 2011, vol. 46, pp. 5815-21.10.1007/s10853-011-5537-1 ↗
48. K. Colligan, I. Ucok, K. McTernan, P. Konkol, and J.R. Pickens: Proceedings of the 3 rd International Symposium on Friction Stir Welding, Kobe Exhibition Center, Port Island, Kobe, Japan, 2001.
49. R. Fonda, A. Reynolds, C.R. Feng, K. Knipling, and D. Rowenhorst: Metall. Mater. Trans. A., 2013, vol. 44A, pp. 337-44.10.1007/s11661-012-1460-6 ↗
50. E.A. Brandes and G.B. Brook: Smithells Metals Reference Book, Butterworth Heinemann, Oxford, U.K., 1992.
51. A. Robineau, J.C. Goussain, S. Bozzi, A.L. Etter, I. Drouelle, and T. Baudin: Soudage et Techniques Connexes, 2007, vol. 61, nos. 7-8, pp. 30-8.
52. K. Elangovan and V. Balasubramanian: Mater. Des., 2008, vol. 29, pp. 362-73.10.1016/j.matdes.2007.01.030 ↗
53. R. Taillard: Proceedings of THERMEC 2000, TMS, Warrendale, PA, 2000.
54. P. Alvarez, E. Arruti, E. Aldanondo, and A. Echeverria: FSWP Conference, Saint Etienne, France, 2012.
55. I. Eberl, C. Hantrais, J.C. Ehrström, and C. Nardin: Sci. Technol. Weld. Join., 2010, vol. 15, no. 8, pp. 699-705.10.1179/136217110X12813393169499 ↗