Sol-Gel Derived Nanocrystalline Fluoridated Hydroxyapatite Powders and Nanostructured Coatings for Tissue Engineering Applications
Source abstract
Abstract
Nanocrystalline fluoridated hydroxyapatite (FHA) powders and coatings with a chemical composition of Ca10(PO4)6OH2–x F x (where x values were selected equal to 0.0 ,0.5, 1.0, 1.5, and 2.0) were prepared through a modified simple sol-gel technique in comparison with conventional alkoxide-based sol-gel route. X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), fourier transform infrared (FTIR) spectroscopy, pF-meter with a fluorine-sensitive electrode, and inductively coupled plasma–optical emission spectroscopy (ICP-OES) analysis techniques were employed in order to evaluate phase composition, particle size distribution, morphology, functional groups, fluorine content, and purity of prepared FHA nanopowders, respectively. SEM analysis was used to study the surface morphology and cross section of the FHA coatings, deposited on 316L stainless steel substrate. Results indicated that single-phase and homogeneous FHA nanopowders with carbonate peaks in the FTIR spectrum were synthesized through the modified sol-gel technique. TEM analysis revealed that fluorapatite (FA) powder was composed of nanosized particles, ~25 nm in size, with polyhedron shape and straight corners. In the modified sol-gel technique, polymerization and gelation kinetic of the sol were significantly improved without any need to use additives or pH control. Uniform, dense, well-adhered, and compacted FHA coatings were formed on the 316L stainless steel substrate after 24 hours of aging.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. C. Drouet, F. Bosc, M. Banu, C. Largeot, C. Combes, G. Dechambre, C. Estournès, G. Raimbeaux, and C. Rey: Powder Technol., 2009, vol. 190, pp. 118–22.10.1016/j.powtec.2008.04.041 ↗
2. L.L. Hench and J. Wilson: Introduction to Bioceramics, World Scientific, Singapore, 1993.10.1142/2028 ↗
3. S. Cazalbou, C. Combes, D. Eichert, and C. Rey: J. Mater. Chem., 2004, vol. 14, pp. 2148–53.10.1039/b401318b ↗
4. S. Kannan, J.H.G. Rocha, and J.M.F. Ferreira: J. Mater. Chem., 2006, vol. 16, pp. 286–91.10.1039/b511867k ↗
5. R. Murugan, T.S. Sampath, and K. Panduranga: Mater. Lett., 2002, vol. 57, pp. 429–33.10.1016/S0167-577X(02)00805-4 ↗
6. H.B. Pan and B.W. Darvell: Arch. Oral Biol., 2007, vol. 52, pp. 861–68.10.1016/j.archoralbio.2007.03.002 ↗
7. P. Leamy, P.W. Brown, K. Tenhuisen, and C. Randall: J. Biomed. Mater. Res., 1998, vol. 42, pp. 458–64.10.1002/(SICI)1097-4636(19981205)42:3<458::AID-JBM16>3.0.CO;2-C ↗
8. Y. Chen and X. Miao: Biomaterials, 2005, vol. 26, pp. 1205–10.10.1016/j.biomaterials.2004.04.027 ↗
9. A. Bianco, I. Cacciotti, M. Lombardi, L. Montanaro, E. Bemporad, and M. Sebastiani: Ceram. Int., 2010, vol. 36, pp. 313–22.10.1016/j.ceramint.2009.09.007 ↗
10. Q. Xiang, Yong Liu, X. Sheng, and X. Dan: Dent. Mater., 2007, vol. 23, pp. 251–58.10.1016/j.dental.2006.10.008 ↗
11. S. Kannan, J.H.G. Rocha, S. Agathopoulos, and J.M.F. Ferreira: Acta Biomater., 2007, vol. 3, pp. 243–49.10.1016/j.actbio.2006.09.006 ↗
12. H.U. Lee, Y.S. Jeong, S.Y. Park, S.Y. Jeong, H.G. Kim, and C.R. Cho: Curr. Appl. Phys., 2009, vol. 9, pp. 528–33.10.1016/j.cap.2008.03.020 ↗
13. H. Kim, E. Lee, H.E. Kim, V. Salih, and J.C. Knowles: Biomaterials, 2005, vol. 26, pp. 4395–404.10.1016/j.biomaterials.2004.11.008 ↗
14. H.W. Kim and Y.M. Kong: Biomaterials, 2004, vol. 25, pp. 2919–26.10.1016/j.biomaterials.2003.09.074 ↗
15. H.W. Kim and Y.M. Kong: Biomaterials, 2004, vol. 25, pp. 3351–58.10.1016/j.biomaterials.2003.09.104 ↗
16. J.R. Farley, J.E. Wergedal, and D.J. Barlink: Science, 1983, vol. 222, pp. 330–32.10.1126/science.6623079 ↗
17. B.Y. Reed, J.E. Zerwekh, and P.P. Antich: J. Bone Miner. Res., 1993, vol. 8, pp. 19–25.10.1002/jbmr.5650080104 ↗
18. D. Yan, A. Gurumurthy, M. Wright, T. Wayne, E.G. Loboa, and E.T. Everett: Bone, 2007, vol. 41, pp. 1036–44.10.1016/j.bone.2007.07.018 ↗
19. E. Bertoni, A. Bigi, G. Cojazzi, M. Gandolfi, S. Panzavolta, and N. Roveri: J. Inorg. Biochem., 1998, vol. 72, pp. 29–35.10.1016/S0162-0134(98)10058-2 ↗
20. E.Z. Kurmaev, S. Matsuya, S. Shin, M. Watanabe, R. Eguchi, Y. Ishiwata, T. Takeuchi, and M.J. Iwami: J. Mater. Sci.: Mater. Med., 2002, vol. 13, pp. 33–37.10.1023/A:1013626316980 ↗
21. L.M. Rodriguez-Lorenzo, J.N. Hart, and K.A. Gross: Biomaterials, 2003, vol. 24, pp. 3777–85.10.1016/S0142-9612(03)00259-X ↗
22. Z. Lu, H. Wang, J. Zeng, and J. Liu: J. Cryst. Growth, 2009, vol. 311, pp. 4791–98.10.1016/j.jcrysgro.2009.09.024 ↗
23. H. Qu and M. Wei: J. Mater. Sci.: Mater. Med., 2005, vol. 16, pp. 129–33.10.1007/s10856-005-5943-5 ↗
24. K. Cheng, S. Zhang, and W. Weng: J. Sol-Gel Sci. Technol., 2006, vol. 38, pp. 13–37.10.1007/s10971-005-5630-5 ↗
25. K. Cheng, G. Han, W. Weng, H. Qu, P. Du, J. Yang, and J.M.F. Ferreira: Mater. Res. Bull., 2003, vol. 38, pp. 89–97.10.1016/S0025-5408(02)00985-6 ↗
26. K. Cheng, G. Shen, W. Weng, G. Han, J.M.F. Ferreira, and J. Yang: Mater. Lett., 2001, vol. 51, pp. 37–41.10.1016/S0167-577X(01)00261-0 ↗
27. K. Cheng, S. Zhang, and W. Weng: Surf. Coat. Technol., 2005, vol. 198, pp. 237–41.10.1016/j.surfcoat.2004.10.023 ↗
28. J. Wang, Y. Chao, Q. Wanb, Z. Zhu, and H. Yu: Acta Biomater., 2009, vol. 5, pp. 1798–1807.10.1016/j.actbio.2009.01.005 ↗
29. M.H. Fathi and E. Mohammadi Zahrani: J. Cryst. Growth, 2009, vol. 311, pp. 1392–403.10.1016/j.jcrysgro.2008.11.100 ↗
30. G. Bezzi, G. Celotti, E. Landi, T.M.G. La Torretta, I. Sopyan, and A. Tampieri: Mater. Chem. Phys., 2003, vol. 78, pp. 816–24.10.1016/S0254-0584(02)00392-9 ↗
31. B.D. Cullity: Elements of X-Ray Diffraction, 2nd ed., Addison-Wesley Publishing, Reading, MA, 1977.
32. E. Landi, A. Tampieri, G. Celotti, and S. Sprio: J. Eur. Ceram. Soc., 2000, vol. 20, pp. 2377–87.10.1016/S0955-2219(00)00154-0 ↗
33. ASTM Standard Specification for Composition of Ceramic Hydroxyapatite for Surgical Implants, F1185–88, ASTM, Philadelphia, PA, 1988, p. 415.
34. C.J. Brinker and G.W. Scherer: Sol-Gel Science, Academic Press, Boston, MA, 1990.
35. D.M. Liu, T. Troczynski, and W.J. Tseng: Biomaterials, 2001, vol. 22, pp. 1721–30.10.1016/S0142-9612(00)00332-X ↗
36. A. Bigi, E. Boanini, and K. Rubini: J. Solid State Chem., 2004, vol. 177, pp. 3092–98.10.1016/j.jssc.2004.05.018 ↗
37. S. Kim and P.N. Kumta: Mater. Sci. Eng. B, 2004, vol. 111, pp. 232–36.10.1016/j.mseb.2004.04.011 ↗
38. D.M. Liu, T. Troczynski, and W.J. Tseng: Biomaterials, 2002, vol. 23, pp. 1227–36.10.1016/S0142-9612(01)00242-3 ↗
39. M.H. Fathi and A. Hanifi: Adv. Appl. Ceram., 2009, vol. 108, pp. 363–68.10.1179/174367609X414080 ↗
40. L. Calderin and M.J. Stott: Phys. Rev., 2003, vol. 67, pp. 134106–10.10.1103/PhysRevB.67.134106 ↗
41. S. Cazalbou, C. Combes, D. Eichert, and C. Rey: J. Mater. Chem., 2004, vol. 14, pp. 2148–53.10.1039/b401318b ↗
42. JCPDS File No. 15-0876 (Fluorapatite), Joint Committee on Powder Diffraction Standards, Swathmore, PA, 1988.
43. A.J. Ruys, K.A. Zeigler, O.C. Standard, A. Brandwood, B.K. Milthorpe, and C.C. Sorrell: in Proceedings for the International Ceramic Conference. AUSTCERAM-92, M.J. Bannister, ed., CSIRO, Melbourne, 1992, vol. 2, pp. 605–10.
44. C.M. Lopatin, V. Pizziconi, T.L. Alford, and T. Laursen: Thin Solid Films, 1998, vol. 326, pp. 227–32.10.1016/S0040-6090(98)00531-8 ↗
45. M. Kay, R.A. Young, and A.S. Posner: Nature, 1964, vol. 204, pp. 3056–65.10.1038/2041050a0 ↗
46. M. Wei, J.H. Evans, T. Bostrom, and L. Grndahl: J. Mater. Sci.: Mater. Med., 2003, vol. 14, pp. 311–20.10.1023/A:1022975730730 ↗
47. JCPDS File No. 09-0432 (Hydroxyapatite), Joint Committee on Powder Diffraction Standards, Swathmore, PA, 1988.
48. M.H. Fathi and E. Mohammadi Zahrani: J. Alloys Compd., 2009, vol. 475, pp. 408–14.10.1016/j.jallcom.2008.07.058 ↗
49. J.P. Lafon, E. Champion, and D. Bernache: J. Eur. Ceram. Soc., 2008, vol. 28, pp. 139–47.10.1016/j.jeurceramsoc.2007.06.009 ↗
50. R. Murugan and S. Ramakrishna: J. Cryst. Growth, 2005, vol. 274, pp. 209–13.10.1016/j.jcrysgro.2004.09.069 ↗
51. H. Zhang, Q. Zhu, and Z. Xie: Mater. Res. Bull., 2005, vol. 40, pp. 1326–34.10.1016/j.materresbull.2005.04.005 ↗
52. F. Freund and R.M. Knobel: Dalton Trans., J. Chem. Soc., 1977, vol. 6, pp. 1136–40.10.1039/dt9770001136 ↗
53. C. Rey, J.L. Miquel, L. Facchini, A.P. Legrand, and M.J. Glimcher: Bone, 1995, vol. 16, pp. 583–86.10.1016/8756-3282(95)00101-I ↗
54. M.G. Taylor, S.F. Parker, K. Simkiss, and C.H. Mitchell: Phys. Chem. Chem. Phys., 2001, vol. 3, pp. 1514–17.10.1039/b005666i ↗
55. M. Okazaki, H. Tohda, T. Yanagisawa, M. Taira, and J. Takahashi: Biomaterials, 1998, vol. 19, pp. 611–16.10.1016/S0142-9612(97)00151-8 ↗
56. J. Kazimiroff, S.R. Frankel, and R.Z. LeGeros: Bioceramics, 1996, vol. 9, pp. 169–72.
57. T. Sakae, A. Ookubo, and R.Z. LeGeros: Key Eng. Mater., 2003, vol. 240, pp. 395–98.10.4028/www.scientific.net/KEM.240-242.395 ↗
58. F. Yao, J.P. LeGeros, and R.Z. LeGeros: Acta Biomater., 2009, vol. 5, pp. 2169–77.10.1016/j.actbio.2009.02.007 ↗
59. K.A. Gross and L.M. Rodriguez-Lorenzo: Biomaterials, 2004, vol. 25, pp. 1375–84.10.1016/S0142-9612(03)00565-9 ↗
60. E. Mohammadi Zahrani and M.H. Fathi: Ceram. Int., 2009, vol. 35, pp. 2311–23.10.1016/j.ceramint.2009.01.012 ↗
61. F.M. Amanullah, K.J. Pratap, and V. Hari Babu: Mater. Sci. Eng. B, 1998, vol. 52, pp. 93–98.10.1016/S0921-5107(98)00113-5 ↗
62. K. Williamson and W.H. Hall: Acta Metall., 1953, vol. 1, pp. 22–31.10.1016/0001-6160(53)90006-6 ↗
63. A. Ravaglioli and A. Krajewski: Bioceramics: Materials, Properties, Applications, Chapman and Hall, London, 1992.10.1007/978-94-011-2336-5 ↗
64. K. Hwang and Y. Lim: Chemical: Surf. Coat. Technol., 1999, vol. 115, pp. 172–75.10.1016/S0257-8972(99)00174-7 ↗