Evaluation of Microstructure and Mechanical Properties of Nano-Y2O3-Dispersed Ferritic Alloy Synthesized by Mechanical Alloying and Consolidated by High-Pressure Sintering
Source abstract
Abstract
In this study, an attempt has been made to synthesize 1.0 wt pct nano-Y2O3-dispersed ferritic alloys with nominal compositions: 83.0 Fe-13.5 Cr-2.0 Al-0.5 Ti (alloy A), 79.0 Fe-17.5 Cr-2.0 Al-0.5 Ti (alloy B), 75.0 Fe-21.5 Cr-2.0 Al-0.5 Ti (alloy C), and 71.0 Fe-25.5 Cr-2.0 Al-0.5 Ti (alloy D) steels (all in wt pct) by solid-state mechanical alloying route and consolidation the milled powder by high-pressure sintering at 873 K, 1073 K, and 1273 K (600°C, 800°C, and 1000°C) using 8 GPa uniaxial pressure for 3 minutes. Subsequently, an extensive effort has been undertaken to characterize the microstructural and phase evolution by X-ray diffraction, scanning and transmission electron microscopy, and energy dispersive spectroscopy. Mechanical properties including hardness, compressive strength, Young’s modulus, and fracture toughness were determined using micro/nano-indentation unit and universal testing machine. The present ferritic alloys record extraordinary levels of compressive strength (from 1150 to 2550 MPa), Young’s modulus (from 200 to 240 GPa), indentation fracture toughness (from 3.6 to 15.4 MPa√m), and hardness (from13.5 to 18.5 GPa) and measure up to 1.5 through 2 times greater strength but with a lower density (~7.4 Mg/m3) than other oxide dispersion-strengthened ferritic steels (<1200 MPa) or tungsten-based alloys (<2200 MPa). Besides superior mechanical strength, the novelty of these alloys lies in the unique microstructure comprising uniform distribution of either nanometric (~10 nm) oxide (Y2Ti2O7/Y2TiO5 or un-reacted Y2O3) or intermetallic (Fe11TiY and Al9.22Cr2.78Y) particles' ferritic matrix useful for grain boundary pinning and creep resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Advanced materials and composites · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. R. K. Nanstad, D. A. McClintock, D. T. Hoelzer, L. Tan, T. R. Allen J. Nucl. Mater., 2009, vol. 392, pp.331-40.10.1016/j.jnucmat.2009.03.022 ↗
2. S. Ohtuska, S. Ukai, M. Fujiwara, T. Kaito, T. Narita, Mater. Trans. A, 2005, vol. 46, pp. 487-92.10.2320/matertrans.46.487 ↗
3. S. Ukai, S. Mizuta, T. Yoshitake, T. Okuda, M. Fujiwara, S.Hagi, T. Kobayashi, J. Nucl. Mater., 2000, vol. 283–87, pp.702-06.10.1016/S0022-3115(00)00114-8 ↗
4. M. K. Miller, D. T. Hoelzer, E. A. Kenik, K. F. Russell, Intermetallics, 2005, vol.13, pp. 387-92.10.1016/j.intermet.2004.07.036 ↗
5. R. W. Evans, J. Presto, B. Wilshire, E. A. Little, J. Nucl. Mater. 1992, vol. 195, pp. 24.10.1016/0022-3115(92)90359-S ↗
6. S. Ukai, M. Harada, H. Okada, M. Inoue, S. Nomura, S.Shikakura, K. Asabe, T. Nishida, M. Fujiwara, J. Nucl.Mater. 1993, vol. 204, pp. 65-73.10.1016/0022-3115(93)90200-I ↗
7. C. Zankine, C. Prioul, D. Francois, Mater. Sci. Eng. A. 1996, vol. 219, p. 102.10.1016/S0921-5093(96)10415-9 ↗
8. D. K. Mukhopadhyay, F.H. Froes, D.S. Gelles, J. Nucl.Mater. 1998, vol. 258–63, pp. 1209-15.10.1016/S0022-3115(98)00188-3 ↗
9. S. Ukai, T. Nishida, T. Okuda, T. Yoshitake, J. Nucl. Mater. 1998, vol. 258–63, pp. 1745-49.10.1016/S0022-3115(98)00241-4 ↗
10. I. S. Kim, J. D. Hunn, N. Hashimoto, D. L. Larson, P. J.Maziasz, K. Miyahara, E. H. Lee, J. Nucl. Mater. 2000, vol. 280, pp. 264-74.10.1016/S0022-3115(00)00066-0 ↗
11. C. Capdevila, Y. L. Chen, N. C. Krieger Lassen, A. R. Jones and H.K. D. H. Bhadeshia: ISIJ International, 2003, vol. 43, pp. 777–83.10.2355/isijinternational.43.777 ↗
12. C.P. Jongenburger and R. F. Singer: in Proc. Conf. New Materials by Mechanical Alloying Techniques, E. Arzt and L. Schultz, eds., Calw-Hirsau, DGM Verlag, Oberursel, 1988, p. 157.
13. K. Murakami, H. Harada and H.K.D.H Bhadeshia: in Proceedings of Heat Treatment ‘92, I. Tamura, ed., Kyoto, 1992, pp. 269–72.
14. T.S. Chou, H.K.D.H Bhadeshia, G. McColvin and I.C. Elliott: in Mechanical Alloying for Structural Applications, Proceedings of the 2nd International Conference on Structural Applications of Mechanical Alloying, Vancouver, British Columbia, Canada, ASM, Materials Park, OH, 1993, pp. 77–82.
15. J. Q. Guo, K. Kita, N. S. Kazama, J. Nagahora, K. Ohtera, Mater. Sci. Eng. A, 1995, vol. 203, pp. 420–26.10.1016/0921-5093(95)09880-1 ↗
16. K. I. Moon, K. S. Lee, J. Alloy Compd., 1999, vol.291, pp.312–21.10.1016/S0925-8388(99)00299-6 ↗
17. S. J. Hong, B. S. Chum, Mater. Sci. Eng. A., 2003, vol. 348, pp. 262–70.10.1016/S0921-5093(02)00728-1 ↗
18. O. N. Senkov, S. V. Senkova, J. M. Scott, D.B. Miracle, Mater. Sci. Eng. A, 2005, vol. 393, pp.12–21.10.1016/j.msea.2004.09.061 ↗
19. S. Z. Han, M. Goto, C. Lim, C. J. Kim, S. Kim, J. Alloy Compd., 2007, vol. 434-35, pp. 304-6.10.1016/j.jallcom.2006.08.179 ↗
20. S. Bera, Z. Zuberova, R.J. Helling, Y. Estrin, I. Manna, Philos. Mag., 2010, vol. 90, pp. 1465-83.10.1080/14786430903365286 ↗
21. Y. Kawamura, H. Mano, A. Inoue, Scripta Mater., 2001, vol.44, pp. 1599–1604.10.1016/S1359-6462(01)00781-3 ↗
22. I. Borner, J. Eckert, Scripta Mater., 2001, vol. 45, pp. 237–44.10.1016/S1359-6462(01)01026-0 ↗
23. A. R. Yavari, W.J. Botta-Filho, C.A.D. Rodrigues, C. Cardoso, R.Z. Valiev, Scripta Mater., 2002, vol.46, pp. 711–16.10.1016/S1359-6462(02)00057-X ↗
24. V. M. Segal, Mater. Sci. Eng. A, 2002, vol. 338, pp. 331–44.10.1016/S0921-5093(02)00066-7 ↗
25. W. Pachla, M.Kulczyk, M. Sus-Ryszkowska, A. Mazur and K. J. Kurzydlowski, J. Mater. Proce. Tech., 2008, vol. 205, pp. 173-82.10.1016/j.jmatprotec.2007.11.103 ↗
26. S. Bera, W. Lojkowsky, I. Manna, Metall. Mater. Trans. A, 2009, vol. 40A, pp. 3276-83.10.1007/s11661-009-0019-7 ↗
27. D. Roy, R. Mitra, T. Chudoba, Z. Witczak, W. Lojkowski and I. Manna, Mater. Sci. Eng. A, 2008, vol. 497, pp. 93–100.10.1016/j.msea.2008.07.059 ↗
28. S. K. Karak, C.S.Vishnu, Z. Witczak, W. Lojkowski, J. Dutta Majumdar and I. Manna, Wear, 2010, vol.270, pp.5-11.10.1016/j.wear.2010.08.021 ↗
29. S. K. Karak, T. Chudoba, Z. Witczak, W. Lojkowski and I. Manna, Mater. Sci.Engg A., 2011, vol.528,pp.7475-83.10.1016/j.msea.2011.06.039 ↗
30. S. K. Karak, J. Dutta Majumdar, W. Lojkowski, A. Michalski, L. Ciupinski, K. J. Kurzydlowski and I.Manna, Philos.Mag., 2012, vol.92, pp.516-34.10.1080/14786435.2011.619508 ↗
31. A. Presz, M. Sikibska, M. Pilecki, Powd. Hand. & Proc., 1995, vol. 7, pp. 321-25.
32. K. Nihara, R. Morena, and D.P.H. Hasselman: in Brittle Matrix Composites 2, R.C. Bradt, D.P.H. Hasselman, and F.F. Lange, eds., Elsevier Applied Science, New York, 1983, pp. 84–97.10.1007/978-1-4613-3488-0_7 ↗
33. Z. Witczak, Mater Sci Eng. A., 1997, vol. 239, pp. 206-12.10.1016/S0921-5093(97)00583-2 ↗
34. T. H. Keijser, I. L. Langford, E. J. Mittemeijer, B. P. Vogel, J. Appli. Crystallogr., 1982, vol. 15, pp. 308-14.10.1107/S0021889882012035 ↗
35. D.A. Porter, and E.K. Easterling: Phase Transformations in Metals and Alloys, Van Nostrand Reinhold Co. Ltd, New York, NY, 1981, pp. 44–47.
36. L. F. He, J. Shirahata, T. Nakayma, T. Suzuki, H. Suematsu, I. Ihara, Y. W. Bao, T. Komastu and K. Niihara, Scripta Materialia, 2011, vol.64, pp.548-51.10.1016/j.scriptamat.2010.11.042 ↗
37. D. Roy, D. Chakravarty, R. Mitra, I. Manna, J. Alloy Compd., 2008, vol. 460, pp. 320–25.10.1016/j.jallcom.2007.06.053 ↗
38. M. Xie, D. Luo, X.-B. Xian, B. Leng, C. Chen, and W. Lu: Fusion Eng. Des., 2010, vol. 85, pp. 964–68.
39. F. Z. Yang, J. Zhao, X. Ai, J. Mater. Proc. Tech., 2009, vol.209, pp. 4531–36.10.1016/j.jmatprotec.2008.10.027 ↗
40. Y. Zhao, M. Wang, J. Mater. Proc. Tech., 2009, vol. 209, pp. 355–59.10.1016/j.jmatprotec.2008.02.005 ↗
41. M. Ardestani, H.R. Rezaie, H. Arabi, H. Razavizadeh, J. Refract. Met. Hard Mater., 2009, vol. 27, pp. 862–67.10.1016/j.ijrmhm.2009.04.004 ↗
42. R.L. Klueh, J.P. Shingledecker, R.W. Swindeman, and D.T. Hoelzer: J. Nucl. Mater., 2005, vol. 341, pp.103–14.10.1016/j.jnucmat.2005.01.017 ↗
43. X. D. He, Y. Xin, M. W. Li, Y. Sun, J. Alloy Compd., 2009, vol. 467, pp.347–50.10.1016/j.jallcom.2007.11.122 ↗
44. Z. Zhaohui, W. Fuchi, Inter. J. Refractory Metals and Hard Mater., 19 (2001) 177-182.10.1016/S0263-4368(01)00039-7 ↗
45. K.H. Lee, S.I. Cha, H.J. Ryub, M.F. Dilmore, and S.H. Honga: J. Alloy Compd., 2007, vol. 434–35, pp. 433–36.10.1016/j.jallcom.2006.08.284 ↗
46. C.H. Caceres, D.M. Rovera, J. Light Metals., 2001, vol.1, pp. 151–56.10.1016/S1471-5317(01)00008-6 ↗
47. C.H. Caceres, A. Blake, Phys. Status Solidi A., 2002, vol. 194, pp.147–58.10.1002/1521-396X(200211)194:1<147::AID-PSSA147>3.0.CO;2-L ↗
48. J.H. Schneibel, C.T. Liu, M.K. Miller, M.J. Mills, P.M. Sarosi, M. Heilmaier, D. Sturm, Scripta Mater. 2009, vol. 61, pp. 793-96.10.1016/j.scriptamat.2009.06.034 ↗
49. J.H. Schneibel, M. Heilmaier, W. Blum, G. Hasemann, T. Shanmugasundaram, Acta Mater. 2011, vol. 59, pp. 1300-08.10.1016/j.actamat.2010.10.062 ↗