Fabrication and characterizations of new glassy Co71Ti24B5 alloy powders and subsequent hot pressing into a fully dense bulk glass
Source abstract
Abstract
A single glassy phase of Co71Ti24B5 alloy has been synthesized by high-energy ball milling the elemental powders at room temperature, using the mechanical alloying method. The synthetic glassy powder obtained after 130 ks of ball milling exhibits good soft magnetic properties with a polarization magnetization and coercivity values of 1.01 T and 2.86 kA/m, respectively. This ternary glassy alloy in which its glass transition temperature (Tg) lies at a rather high temperature (805 K) crystallizes at 868 K through a single sharp exothermic peak with an enthalpy change of crystallization (ΔHx) of −3.28 kJ/mol. The supercooled liquid region before crystallization, ΔTx of the synthesized glassy powders shows a large value (63 K) for a ternary system. The reduced glass transition temperature (ratio between Tg and liquidus temperatures, Tl(Tg/Tl)) was found to be 0.55. The end product of the glassy powder (130 ks) was compacted in an argon gas atmosphere at 835 K with a pressure of 780 MPa, using the hot-pressing technique. The consolidated sample is fully dense (∼99.5 pct) and maintains its chemically homogeneous glassy structure. The measured polarization magnetization and coercivity values of as-consolidated powders are measured and found to be 0.96 T and 2.92 kA/m, respectively. The Vickers microhardness of the bulk glassy Co71Ti24B5 sample is measured and found to be in the range between 7.32 and 7.46 GPa.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. M. Sherif El-Eskandarany: Mechanical Alloying for Fabrication of Advanced Engineering Materials, 1st ed., William Andrew Publishing, New York, NY, 2001, p. 5.
2. D. Wexler, A. Calka, and A.Y. Mosbah: J. Alloys Compounds, 2000, vol. 309, pp. 201–07.10.1016/S0925-8388(00)01030-6 ↗
3. M. Sherif El-Eskandarany and A.H. Ashour: J. Alloys Compounds, 2000, vol. 313, pp. 224–34.10.1016/S0925-8388(00)01175-0 ↗
4. M.A. Bab and L. Mendoza-Zelis: Scripta Mater., 2004, vol. 50, pp. 99–104.10.1016/j.scriptamat.2003.09.029 ↗
5. M. Sherif El-Eskandarany: J. Alloys Compounds, 2000, vol. 305, pp. 225–38.10.1016/S0925-8388(00)00692-7 ↗
6. I.G. Konstanchuk, E.Y. Ivanov, B.B. Bokhonov, and V.V. Boldyrev: J. Alloys Compounds, 2001, vol. 319, pp. 290–95.10.1016/S0925-8388(01)00911-2 ↗
7. W. Lee, J. Lee, J.D. Bae, C.S. Byun, and D.K. Kim: Scripta Mater., 2001, vol. 77, pp. 97–103.10.1016/S1359-6462(00)00547-9 ↗
8. M. Sherif El-Eskandarany, M. Omori, T.J. Konno, K. Sumiyama, T. Hirai, and K. Suzuki: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1973–81.10.1007/s11661-998-0023-3 ↗
9. M. Sherif El-Eskandarany: Alloys Compounds, 1998, vol. 279, pp. 263–71.10.1016/S0925-8388(98)00658-6 ↗
10. D.Y. Ying, D.L. Zhang, and M. Newby: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2115–25.10.1007/s11661-004-0160-2 ↗
11. M. Sherif El-Eskandarany: J. Alloys Compounds, 2000, vol. 305, pp. 219–24.10.1016/S0925-8388(00)00754-4 ↗
12. K.W. Liu and F. Mucklich: Acta Mater., 2001, vol. 49, pp. 395–403.10.1016/S1359-6454(00)00340-2 ↗
13. N. Schlorke, J. Eckert, and L. Schultz: J. Phys. D, 1999, vol. 32, pp. 855–61.10.1088/0022-3727/32/8/003 ↗
14. Baolong Shen and Akihisa Inoue: J. Mater. Res., 2003, vol. 18, pp. 2115–21.10.1557/JMR.2003.0297 ↗
15. Akihisa Inoue and Baolong Shen: J. Mater. Res., 2003, vol. 18, pp. 2799–806.10.1557/JMR.2003.0390 ↗
16. L. Xia, M.B. Tang, H. Xu, M.X. Pan, D.Q. Zhao, W.H. Wamg, and Y.D. Dong: J. Mater. Res., 2004, vol. 19, pp. 1307–10.10.1557/JMR.2004.0172 ↗
17. V. Ponnambalam, S. Joseph Poon, and Gary J. Shiflet: Mater. Res., 2004, vol. 19, pp. 1320–23.10.1557/JMR.2004.0176 ↗
18. M. Sherif El-Eskandarany, Wei Zhang, and A. Inoue: J. Mater. Res., 2002, vol. 17, pp. 2447–56.10.1557/JMR.2002.0357 ↗
19. T. Mizushima, A. Makino, and A. Inoue: J. Appl. Phys., 1998, vol. 83, pp. 6329–31.10.1063/1.367812 ↗
20. B. Shen, H. Kimura, A. Inoue, and T. Mizushima: Mater. Trans., JIM, 2001, vol. 42, pp. 660–63.10.2320/matertrans.42.660 ↗
21. H. Koshiba and A. Inoue: Mater. Trans., JIM, 2001, vol. 42, pp. 2572–75.10.2320/matertrans.42.2572 ↗
22. Y. Kawamura, A. Inoue, and T. Masumoto: Scripta Metall., 1993, vol. 29, pp. 25–31.10.1016/0956-716X(93)90248-Q ↗
23. B. Shen, H. Kimura, A. Inoue, M. Omori, and A. Okubo: Mater. Trans., JIM, 2002, vol. 43, pp. 1961–74.10.2320/matertrans.43.1961 ↗
24. S. Ishihara, W. Zhang, and A. Inoue: Scripta Metall., 2002, vol. 47, pp. 231–37.10.1016/S1359-6462(02)00116-1 ↗
25. Y. Kawamura, T. Shibata, A. Inoue, and T. Masumoto: Scripta Metall., 1997, vol. 37, 431–37.10.1016/S1359-6462(97)00105-X ↗
26. Y. Kawamura, T. Nakamura, and A. Inoue: Mater. Sci. Forum, 1999, vols. 304–306, pp. 349–57.10.4028/www.scientific.net/MSF.304-306.349 ↗
27. M. Sherif El-Eskandarany, Satoru Ishihara, and A. Inoue: J. Mater. Res., 2003, vol. 18, pp. 2435–45.10.1557/JMR.2003.0339 ↗