Effect of low-temperature shock compression on the microstructure and strength of copper
Source abstract
Abstract
Copper with two purities (99.8 and 99.995 pct) was subjected to shock compression from an initial temperature of 90 K. Shock compression was carried out by explosively accelerating flyer plates at velocities generating pressures between 27 and 77 GPa. The residual microstructure evolved from loose dislocation cells to mechanical twins and, at the 57 and 77 GPa pressures, to complete recrystallization, with a grain size larger than the initial one. The shock-compressed copper was mechanically tested in compression at a strain rate of 10−3 s−1 and temperature of 300 K; the conditions subjected to lower pressures (27 and 30 GPa) exhibited work softening, in contrast to the conventional work-hardening response. This work softening is due to the uniformly distributed dislocations and the formation of loose cells, evolving, upon plastic deformation at low strain rates, into well-defined cells, with a size of approximately 1 µm. The 99.995 pct copper subjected to the higher shock-compression pressures (57 and 77 GPa) exhibited a stress-strain response almost identical to the unshocked condition. This indicates that the residual temperature rise was sufficient to completely recrystallize the structure and eliminate the hardening due to shock compression. Thermodynamic calculations using the Hugoniot-Rankine conservation equations predict residual temperatures of 570 and 1000 K for the 57 and 77 GPa peak pressures, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Energetic Materials and Combustion · High-pressure geophysics and materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. O. Johari and G. Thomas: Acta Metall., 1964, vol. 12, pp. 1153–59.10.1016/0001-6160(64)90095-1 ↗
2. R.L. Nolder and G. Thomas: Acta Metall., 1964, vol. 12, pp. 227–40.10.1016/0001-6160(64)90192-0 ↗
3. M.A. Meyers: Dynamic Behavior of Materials, John Wiley & Sons, Inc., New York, NY, 1994, pp. 382–447.10.1002/9780470172278.ch14 ↗
4. W.H. Gourdin and D.H. Lassila: Mater. Sci. Eng. A, 1992, vol. 151, pp. 11–18.10.1016/0921-5093(92)90176-2 ↗
5. U.R. Andrade, M.A. Meyers, K.S. Vecchio, and A.H. Chokshi: Acta Metall., 1994, vol. 42 (9), pp. 3183–195.10.1016/0956-7151(94)90417-0 ↗
6. M.A. Meyers, U.R. Andrade, and A.H. Chokshi: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2881–93.10.1007/BF02669646 ↗
7. M.A. Meyers: Metall. Mater. Trans. A, 1977, vol. 8A, pp. 1581–83.10.1007/BF02644862 ↗
8. A.H. Cottrell and R.J. Stokes: Proc. R. Soc. A, 1955, vol. 233, pp. 17–34.
9. W.P. Longo and R.E. Reed Hill: Scripta Metall., 1970, vol. 4, pp. 765–70.10.1016/0036-9748(70)90057-8 ↗
10. W.P. Longo and R.E. Reed Hill: Scripta Metall., 1972, vol. 6, pp. 833–36.10.1016/0036-9748(72)90056-7 ↗
11. W.P. Longo and R.E. Reed Hill: Metallography, 1974, vol. 7, pp. 181–201.10.1016/0026-0800(74)90051-2 ↗
12. F.H. Hammad and W.D. Nix: Trans. ASM, 1966, vol. 59, pp. 94–104.
13. R.G. McQueen, S.P. Marsh, J.M. Taylor, J.N. Frits, and W.J. Carter: in High-Velocity Impact Phenomena, R. Kinslow, ed., Academic Press, New York, NY, 1970, pp. 293–317.10.1016/B978-0-12-408950-1.50012-4 ↗
14. E.A. Chojnowski and R.W. Cahn: in Metallurgical Effects at High Strain Rates, T.W. Rohde, B.M. Butcher, J.T. Holland, and C.H. Karnes, eds., Plenum, New York, NY, 1973, pp. 631–44.10.1007/978-1-4615-8696-8_38 ↗
15. Shock Waves and High Strain Rate Phenomena in Metals, M.A. Meyers and L.E. Murr, eds., Plenum Press, New York, NY, 1981.
16. M.A. Meyers, L.E. Murr, C.Y. Hsu, and G.A. Stone: Mater. Sci. Eng., 1983, vol. 57, pp. 113–26.10.1016/0025-5416(83)90033-2 ↗
17. M.A. Meyers, K.-C. Hsu, and K. Couch-Robino: Mater. Sci. Eng., 1983, vol. 59, pp. 235–49.10.1016/0025-5416(83)90171-4 ↗
18. F.J. Zerilli and R.W. Armstrong: in Shock Waves in Condensed Matter, S.C. Schmid and N.C. Holmes, eds., Elsevier Science Publishers B.V., Amsterdam, 1988, pp. 273–76.
19. F.J. Zerilli and R.W. Armstrong: J. Appl. Phys., 1987, vol. 61, pp. 1816–25.10.1063/1.338024 ↗
20. F.J. Zerilli and R.W. Armstrong: J. Appl. Phys., 1990, vol. 68, pp. 1580–91.10.1063/1.346636 ↗