journal article·2014-10

Crystallographic and Microstructural Studies of Lath Martensitic Steel During Tensile Deformation

Hyuntaek Na, Shoichi Nambu, Mayumi Ojima, Junya Inoue, Toshihiko Koseki

Publisher page

Abstract

Significant crystallographic refinement was observed in the as-quenched lath martensitic steel during tensile deformation up to a strain of 20 pct. Crystallographic investigation by electron backscattering diffraction analysis coupled with the use of crystal plasticity model confirmed that the activation behavior of slip systems is inhomogeneous even within each martensite block. In particular, the activation behavior of slip systems is initially affected by the initial crystal orientation; however, the effect becomes negligible with increasing deformation. In addition, slip systems parallel to the lath plane are preferentially activated during elongation. Our results indicate that the nonuniform crystal rotation within individual blocks is induced not only by grain interaction phenomena but also by the anisotropic activity of slip systems. These are key factor that determines the grain refinement behavior in the as-quenched lath martensitic steel during deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. D.P. Koistinen and R.E. Marburger: Acta Metall. Mater., 1959, vol. 7, pp. 59-60.10.1016/0001-6160(59)90170-1 ↗
2. R. Lagneborg: Acta Metall. Mater., 1964, vol. 12, pp. 823-43.10.1016/0001-6160(64)90176-2 ↗
3. G.Y. Lai, W.E. Wood, R.A. Clark, V.F. Zackay, and E.R. Parker: Metall. Trans., 1974, vol. 5, pp. 1663-70.10.1007/BF02646340 ↗
4. T.E. Swarr and G. Krauss: Metall. Trans. A, 1976, vol. 7A, pp. 41-8.10.1007/BF02644037 ↗
5. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789-99.10.1016/S1359-6454(02)00577-3 ↗
6. H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279-88.10.1016/j.actamat.2005.11.001 ↗
7. S. Morito, X. Huang, T. Furuhara, T. Maki, and N. Hansen: Acta Mater., 2006, vol. 54, pp. 5323-31.10.1016/j.actamat.2006.07.009 ↗
8. V.P. Vylezhnev, L.M. Kleyner, G.V. Kurdjumov, and V.I. Sarrak: Fiz. Met. Metalloved., 1967, vol. 24, pp. 188-91.
9. Y.V. Khlebnikova, D.P. Rodionov, I.L. Yakovleva, and V.M. Schastlivtsev: Phys. Met. Metall., 1998, vol. 86, pp. 394-9.
10. V.M. Schastlivtsev, D.P. Rodionov, Y.V. Khlebnikova, and I.L. Yakovleva: Mater. Sci. Eng. A, 1999, vol. 275, pp. 437-42.10.1016/S0921-5093(99)00323-8 ↗
11. R. Ueji, N. Tsuji, Y. Minamino, and Y. Koizumi: Acta Mater., 2002, vol. 50, pp. 4177-89.10.1016/S1359-6454(02)00260-4 ↗
12. N. Tsuji and T. Maki: Scripta Mater., 2009, vol. 60, pp. 1044-9.10.1016/j.scriptamat.2009.02.028 ↗
13. K. Nakashima, Y. Fujimura, H. Matsubayashi, T. Tsuchiyama, and S. Takaki: Tetsu-to-Hagane, 2007, vol. 93, pp. 459-65.10.2355/tetsutohagane.93.459 ↗
14. J. Inoue, S. Nambu, Y. Ishimoto, and T. Koseki: Scripta Mater., 2008, vol. 59, pp. 1055-8.10.1016/j.scriptamat.2008.07.020 ↗
15. S. Nambu, M. Michiuchi, J. Inoue, and T. Koseki: Compos. Sci. Technol., 2009, vol. 69, pp. 1936-41.10.1016/j.compscitech.2009.04.013 ↗
16. S. Nambu, M. Michiuchi, Y. Ishimoto, K. Asakura, J. Inoue, and T. Koseki: Scripta Mater., 2009, vol. 60, pp. 221-4.10.1016/j.scriptamat.2008.10.007 ↗
17. M. Michiuchi, S. Nambu, Y. Ishimoto, J. Inoue, and T. Koseki: Acta Mater., 2009, vol. 57, pp. 5283-91.10.1016/j.actamat.2009.06.021 ↗
18. P. Lhuissier, J. Inoue, and T. Koseki: Scripta Mater., 2011, vol. 64, pp. 970-3.10.1016/j.scriptamat.2011.01.048 ↗
19. M. Ojima, J. Inoue, S. Nambu, P. Xu, K. Akita, H. Suzuki, and T. Koseki: Scripta Mater., 2011, vol. 66, pp. 139-42.10.1016/j.scriptamat.2011.10.018 ↗
20. F.J. Humphreys, P.B. Prangnell, J.R. Bowen, A. Gholinia, and C. Harris: Philos. Trans. R. Soc. A, 1999, vol. 357, pp. 1663-80.10.1098/rsta.1999.0395 ↗
21. X.G. Fan, H. Yang, Z.C. Sun, and D.W. Zhang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5391-9.10.1016/j.msea.2010.05.056 ↗
22. T.O. Erinosho, A.C.F. Cocks, and F.P.E. Dunne: Int. J. Plast., 2013, DOI:10.1016/j.ijplas.2013.04.008.10.1016/j.ijplas.2013.04.008 ↗
23. M. Kraska, M. Doig, D. Tikhomirov, D. Raabe, and F. Roters: Comput. Mater. Sci., 2009, vol. 46, pp. 383-92.10.1016/j.commatsci.2009.03.025 ↗
24. I.J. Beyerlein and L.S. Tóth: Prog. Mater. Sci., 2009, vol. 54, pp. 427-510.10.1016/j.pmatsci.2009.01.001 ↗
25. F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler, and D. Raabe: Acta Mater., 2010, vol. 58, pp. 1152-1211.10.1016/j.actamat.2009.10.058 ↗
26. B. Klusemann, B. Svendsen, and H. Vehoff: Comp. Mater. Sci., 2012, vol. 52, pp. 25-32.10.1016/j.commatsci.2011.03.042 ↗
27. D. Stojakovic, R.D. Doherty, S.R. Kalidindi, and F.J.G. Landgraf: Metall. Trans. A, 2008, vol. 39, pp. 1738-46.10.1007/s11661-008-9525-2 ↗
28. S. Reese and D Christ: Int. J. Plast., 2008, vol. 24, pp. 455-82.10.1016/j.ijplas.2007.05.005 ↗
29. N. Siredey, E. Patoor, M. Berveiller, and A. Eberhardt: Int. J. Solids Struct., 1999, vol. 36, pp. 4289-315.10.1016/S0020-7683(98)00196-6 ↗
30. X.M. Wang, B.X. Xu, and Z.F. Yue: Int. J. Plast., 2008, vol. 24, pp. 1307-32.10.1016/j.ijplas.2007.09.006 ↗
31. D.C. Lagoudas, P.B. Entchev, P. Popov, E. Patoor, L.C. Brinson, and X. Gao: Mech. Mater., 2006, vol. 38, pp. 430–62.10.1016/j.mechmat.2005.08.003 ↗
32. P. Thamburaja and L. Anand: J. Mech. Phys. Solids, 2001, vol. 49, pp. 709–37.10.1016/S0022-5096(00)00061-2 ↗
33. P. Shanthraj and M.A. Zikry: J. Mater. Res., 2012, vol. 27, pp. 1598-1611.10.1557/jmr.2012.127 ↗
34. H. Ghassemi-Armaki, P. Chen, S. Bhat, S. Sadagopan, S. Kumar, and A. Bower: Acta Mater., 2013, vol. 61(10), pp. 3640-42.10.1016/j.actamat.2013.02.051 ↗
35. Y. Mine, K. Hirashita, H. Takashima, M. Matsuda, and K. Takashima: Mater. Sci. Eng. A, 2013, vol. 560, pp. 535-44.10.1016/j.msea.2012.09.099 ↗
36. S. Morito, Y. Edamatsu, K. Ichinotani, T. Ohba, T. Hayashi, Y. Adachi, T. Furuhara, G. Miyamoto, and N. Takayama: J. Alloys Compd., 2012, DOI:10.1016/j.jallcom.2012.0.10.1016/j.jallcom.2012.0 ↗
37. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99.10.1016/S1359-6454(02)00577-3 ↗