High-temperature fatigue crack growth behavior of 17-4 PH stainless steels
Source abstract
Abstract
The fatigue crack growth (FCG) behavior was investigated for 17-4 PH stainless steels in three heat-treated conditions, i.e., unaged (condition A), peak-aged (condition H900), and overaged (condition H1150), at temperatures ranging from 300 °C to 500 °C. The high-temperature fatigue crack growth rates (FCGRs) of condition H1150 were increased with an increase in temperature. However, for conditions A and H900 tested at 500 °C, the FCGRs were lower than the lower temperature ones. At 300 °C and 400 °C, H1150 and H900 generally showed the lowest and highest FCGRs, respectively, with condition A demonstrating behavior between the two. At 500 °C, the FCGR curves for all material conditions merged together. The anomalous FCG behavior of 17-4 PH stainless steels at 500 °C was mainly caused by an in-situ precipitate-coarsening effect during test.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. W.F. Smith: Structure and Properties of Engineering Alloys, 2nd ed., McGraw-Hill, Inc., New York, NY, 1993, pp. 328–35.
2. H.J. Rack and D. Kalish: Metall. Trans., 1974, vol. 5, pp. 1595–1605.10.1007/BF02646331 ↗
3. U.K. Viswanathan, S. Banerjee, and R. Krishnan: Mater. Sci. Eng., 1988, vol. A104, pp. 181–89.10.1016/0025-5416(88)90420-X ↗
4. F.B. Pickering: Int. Met. Rev., 1976, vol. 21, pp. 227–68.
5. R.D.K. Misra, G.Y. Prasad, T.V. Balasubramanian, and P.R. Rao: Scripta Metall., 1986, vol. 20, pp. 713–16.10.1016/0036-9748(86)90497-7 ↗
6. R.D.K. Misra, G.Y. Prasad, T.V. Balasubramanian, and P.R. Rao: Scripta Metall., 1987, vol. 21, pp. 1067–70.10.1016/0036-9748(87)90251-1 ↗
7. R. Viswanathan: Damage Mechanisms and Life Assessment of High-Temperature Components, ASM INTERNATIONAL, Metals Park, OH, 1989, pp. 158–69.10.31399/asm.tb.dmlahtc.9781627083409 ↗
8. K.C. Antony: J. Met., 1963, vol. 15, pp. 922–27.
9. U.K. Viswanathan, P.K.K. Nayar, and R. Krishnan: Mater. Sci. Technol., 1989, vol. 5, pp. 346–49.10.1179/mst.1989.5.4.346 ↗
10. X. Zang: Trans. Met. Heat Treatment, 1991, vol. 12, pp. 23–29 (in Chinese).
11. G. Huang: Iron and Steel, 1998, vol. 33, pp. 44–46 (in Chinese).
12. M.U. Islam, G. Campbell, and R. Hsu: Welding J., 1989, vol. 68, pp. 45–50.
13. M. Murayama, Y. Katayama, and K. Hono: Metall. Mater. Trans. A, 1999, vol. 30, pp. 345–53.10.1007/s11661-999-0323-2 ↗
14. J.-H. Wu and C.-K. Lin: Metall. Mater. Trans. A, 2002, vol. 33, pp. 1715–24.10.1007/s11661-002-0180-8 ↗
15. J.-H. Wu and C.-K. Lin: J. Mater. Sci., 2003, vol. 38, pp. 965–71.10.1023/A:1022377225704 ↗
16. J.-H. Wu and C.-K. Lin: Mater. Trans., 2003, vol. 44, pp. 713–21.10.2320/matertrans.44.713 ↗
17. H. Tada, P.C. Paris, and G.R. Irwin: The Stress Analysis of Crack Handbook, 2nd ed., Paris Productions, Inc., St. Louis, MO, 1985.
18. H.H. Johnson: Mater. Res. Standards, 1965, vol. 5, pp. 442–45.
19. E.A. Starke, Jr. and G. Lutjering: in Fatigue and Microstructure, M. Meshii, ed., ASM, Metals Park, OH, 1978, pp. 205–43.