Paraequilibrium Carburization of Duplex and Ferritic Stainless Steels
Source abstract
Abstract
AISI 301 and E-BRITE stainless steels were subjected to low-temperature (743 K) carburization experiments using a commercial technology developed for carburization of 316 austenitic stainless steels. The AISI 301 steel contained ~40 vol pct ferrite before carburization but had a fully austenitic hardened case, ~20-μm thick, and a surface carbon concentration of ~8 at. pct after treatment; this “colossal” paraequilibrium carbon supersaturation caused an increase in lattice parameter of ~3 pct. The E-BRITE also developed a hardened case, 12- to 18-μm thick, but underwent a more modest (~0.3 pct) increase in lattice parameter; the surface carbon concentration was ~10 at. pct. While the hardened case on the AISI 301 stainless steel appeared to be single-phase austenite, evidence for carbide formation was apparent in X-ray diffractometer (XRD) scans of the E-BRITE. Paraequilibrium phase diagrams were calculated for both AISI 301 and E-BRITE stainless steels using a CALPHAD compound energy-based interstitial solid solution model. In the low-temperature regime of interest, and based upon measured paraequilibrium carbon solubilities, more negative Cr-carbon interaction parameters for austenite than those in the current CALPHAD data base may be appropriate. A sensitivity analysis involving Cr-carbon interaction parameters for ferrite found a strong dependence of carbon solubility on relatively small changes in the magnitude of these parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical and Alloy Processes · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. G.M. Michal, F. Ernst, H. Kahn, Y. Cao, F. Oba, N. Agarwal, and A.H. Heuer: Acta Mater., 2006, vol. 54, pp. 1597–1606.10.1016/j.actamat.2005.11.029 ↗
2. G.M. Michal, F. Ernst, and A.H. Heuer: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1819–24.10.1007/s11661-006-0124-9 ↗
3. F.J. Martin, E.J. Lemieux, T.M. Neubauer, R.A. Bayles, P.M. Natishan, H. Kahn, G.M. Michal, and A.H. Heuer: Electrochem. Solid-State Lett., 2007, vol. 10, pp. C-76–C-78.10.1149/1.2794282 ↗
4. K. Farrell, E.D. Specht, J. Pang, L.R. Walker, A. Rar, and J.R. Mayotte: J. Nucl. Mater., 2005, vol. 343, pp. 123–33.10.1016/j.jnucmat.2004.10.169 ↗
5. P.L. Gruzin, V.G. Kastogonov, and P.A. Platanov: Dokl. Akad. Nauk SSR, 1955, vol. 100, pp. 1069–72.
6. A.W. Bowen and G.M. Leak: Metall. Trans., 1970, vol. 1, pp. 1695–1700.10.1007/BF02642019 ↗
7. B.J. Lee: CALPHAD, 1992, vol. 16, pp. 121–49.10.1016/0364-5916(92)90002-F ↗
8. R.R. Judd: Ph.D. Thesis, Carnegie Institute of Technology, Pittsburgh, PA, 1966.
9. W.D. Cullity: Elements of X-Ray Diffraction, Addison-Wesley Publishing Col, Inc., Reading, MA, 1956, pp. 391–96.
10. F. Ernst, A. Avishai, H. Kahn, X. Gu, G.M. Michal, and A.H. Heuer: Metall. Mater. Trans. A, 2009, vol. 40A, DOI 10.1007/s11661-009-9854-910.1007/s11661-009-9854-9 ↗
11. K. Natesan and T.F. Kassner: Metall. Trans., 1973, vol. 4, pp. 2557–66.10.1007/BF02644258 ↗
12. H. Wada: Metall. Trans. A, 1985, vol. 16A, pp. 1479–90.10.1007/BF02658680 ↗
13. J.-O. Anderson: Metall. Trans. A, 1988, vol. 19A, pp. 627–36.10.1007/BF02649276 ↗
14. B. Venkatnaman and J.P. Neumann: Bull. Alloy Phase Diagrams, 1990, vol. 11, pp. 152–59.10.1007/BF02841701 ↗
15. J.J. Poubeau and J. Bigot: Acta Metall., 1985, vol. 33, pp. 1137–41.10.1016/0001-6160(85)90208-1 ↗
16. W.H. Smith: Trans. AIME, 1957, vol. 209, pp. 47–49.
17. T. Christiansen and M.A.J. Somers: Surface Eng., 2005, vol. 21, pp. 445–55.10.1179/174329405X68597 ↗