The Influence of Welding Parameters on the Nugget Formation of Resistance Spot Welding of Inconel 625 Sheets
Source abstract
Abstract
A 2D axisymmetric electro-thermo-mechanical finite element (FE) model is developed to investigate the effect of current intensity, welding time, and electrode tip diameter on temperature distributions and nugget size in resistance spot welding (RSW) process of Inconel 625 superalloy sheets using ABAQUS commercial software package. The coupled electro-thermal analysis and uncoupled thermal–mechanical analysis are used for modeling process. In order to improve accuracy of simulation, material properties including physical, thermal, and mechanical properties have been considered to be temperature dependent. The thickness and diameter of computed weld nuggets are compared with experimental results and good agreement is observed. So, FE model developed in this paper provides prediction of quality and shape of the weld nuggets and temperature distributions with variation of each process parameter, suitably. Utilizing this FE model assists in adjusting RSW parameters, so that expensive experimental process can be avoided. The results show that increasing welding time and current intensity lead to an increase in the nugget size and electrode indentation, whereas increasing electrode tip diameter decreases nugget size and electrode indentation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. H. Eisazadeh, M. Hamedi, and A. Halvaee: Mater. Des., 2010, vol. 31, pp. 1149–1157.10.1016/j.matdes.2009.06.042 ↗
2. D. Li, Q. Guo, S. Guo, H. Peng, and Z. Wu: Mater. Des., 2011, vol. 32, pp. 696–705.10.1016/j.matdes.2010.07.040 ↗
3. M. Sundararaman, L. Kumar, P.G. Eswar, P. Mukhopadhyay, and S. Banerjee: Metall. Mater. Trans. A, 1992, vol. 30, pp. 41-52.
4. S. Aslanlar: Mater. Des., 2006. vol. 27, pp. 125-131.10.1016/j.matdes.2004.09.025 ↗
5. H.A. Nied: Weld. J. Re. Suppl., 1984, vol. 63, p. 123–32.
6. P.S. Wei and C.Y. Ho: ASME J. Heat Transfer, 1990, vol. 112, pp. 316–390.10.1115/1.2910378 ↗
7. C.L. Tsai, O.A. Jammel, J.C. Papritan, and D.W. Dickinson: Weld. J., 1992, vol. 71, pp. 47–54.
8. M. Vogler: Weld. J., 1993, vol. 72, pp. 226-231.
9. S.M. Darwish and S.D. Al-Dkhial: Int. J. Mach. Tools Manuf., 1999, vol. 39, pp. 1589-1610.10.1016/S0890-6955(99)00010-3 ↗
10. X. Sun and P. Dong: Weld. J., 2000, vol. 79, pp. 215–221.
11. Z. Hou, I. Kim, Y. Wang, C. Li, and C.J. Chen: J Mater Process Technol., 2007 vol. 180, pp. 160–165.10.1016/j.jmatprotec.2006.03.143 ↗
12. N. Ranjbar, S. Serajzadeh, and A.H. Kokabi: J. Mater. Process. Technol., 2008, vol. 205, pp. 60–69.10.1016/j.jmatprotec.2007.11.104 ↗
13. Z. Lei, H. Kang, and Y. Liu: Procedia Eng., 2011, vol. 16, pp. 622 – 631.10.1016/j.proeng.2011.08.1133 ↗
14. H. Moshayedi and I. Sattari-Far: J. Mater. Process. Technol., 2012, vol. 212, pp. 347– 354.10.1016/j.jmatprotec.2011.09.004 ↗
15. J. Shen, Y. Zhang, X. Lai, and P.C. Wang: Mater. Des., 2011, vol. 32, pp. 550–560.10.1016/j.matdes.2010.08.023 ↗
16. M. Eshraghi, M.A. Tschopp, M.A. Zaeem, and S.D. Felicelli: Mater. Des., 2014, vol. 56, pp. 387-397.10.1016/j.matdes.2013.11.026 ↗
17. R.S. Florea, K.N. Solanki, D.J. Bammann, J.C. Baird, J.B. Jordon, and M.P. Castanier: Mater. Des., 2012, vol. 34, pp. 624-630.10.1016/j.matdes.2011.05.017 ↗
18. B.H. Chang and Y. Zhou: J. Mater. Process. Technol. 2003, vol. 139, pp. 635-641.10.1016/S0924-0136(03)00613-7 ↗
19. A.W. Society: Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials, ANSI/AWS/SAE/D89-97, Miami, ML (USA): AWS; 1997.
20. ASTM E 340-00, Reapproved 2006, Standard Test Method for Macroetching Metals and Alloys, ASTM International, USA.
21. H. Zhigang, W. Yuanxun, L. Chunzhi, and C.H. Chuanyao: Acta. Mechanica. Solida. Sinica. 2006, vol. 19, pp. 86-94.10.1007/s10338-006-0610-z ↗
22. D. Deng, H. Murakawa, and W. Liang: Comp. Mater. Sci., 2008, vol. 42, pp. 234-244.10.1016/j.commatsci.2007.07.009 ↗
23. P.S. Wei, T.H. Wu: Inter. J. Heat Mass. Trans., 2012, vol. 55, pp. 3316–3324.10.1016/j.ijheatmasstransfer.2012.01.040 ↗
24. S.M. Hamidinejad, F. Kolahan, and A.H. Kokabi: Mater. Des., 2012,, vol. 34, pp. 759–767.10.1016/j.matdes.2011.06.064 ↗
25. F. Khodabakhshi, M. Kazeminezhad, and A.H. Kokabi: Mater. Charact., 2012, vol. 69, pp. 71–83.10.1016/j.matchar.2012.04.011 ↗
26. F. Hayat: Mater. Des., 2011, vol. 32, pp. 2476–2484.10.1016/j.matdes.2010.11.015 ↗