Anomalous Notch Rupture Behavior of Nickel-Based Superalloy Inconel 718 Due to Fabrication by Additive Manufacturing
Source abstract
Abstract
Tensile, creep, stress rupture, and notch rupture testing at 650 °C of Inconel 718 prepared by Laser Powder-Bed Fusion showed properties similar to traditional wrought versions of the alloy except for notch rupture, where all samples failed in the notch with no elongation. The notch rupture results were not sensitive to solution treatment above or below the delta solvus temperature, which is also not characteristic of wrought material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Y. L. Kuo, S. Horikawa and K. Kakehi: Scripta Mat., 2016, Vol. 129, pp. 74-78.10.1016/j.scriptamat.2016.10.035 ↗
2. Y. L. Kuo, S. Horikawa and K. Kakehi: Mat. Des., 2017, Vol. 116, pp. 411-418.10.1016/j.matdes.2016.12.026 ↗
3. Y. L. Kuo, A. Kamigaichi and K. Kakehi: Met. Mat. Trans. A, 2018, Vol. 49, pp. 3831-3837.10.1007/s11661-018-4769-y ↗
4. M. Probstle, S. Neumeier, J. Hopfenmuller, L. P. Freund, T. Niendorf, D. Schwarze and M. Goken: Mat. Sci. Eng. A, 2016, Vol. 674, pp. 299-307.10.1016/j.msea.2016.07.061 ↗
5. M. M. Kirka, F. Medina, R. Dehoff and A. Okello: Mat. Sci. Eng. A, 2017, Vol. 680, pp. 338-346.10.1016/j.msea.2016.10.069 ↗
6. M. M. Kirka, Y. Lee, D. A. Greeley, A. Okello, M. J. Goin, M. T. Pearce and R. J. Dehoff: JOM, 2017, Vol. 69, pp. 523-531.10.1007/s11837-017-2264-3 ↗
7. M. M. Kirka, D. A. Greeley, C. Hawkins and R. R. Dehoff: Int. J. Fatigue, 2017, Vol. 105, pp. 235-243.10.1016/j.ijfatigue.2017.08.021 ↗
8. B. Shassere, D. Greeley, A. Okello, M. Kirka, P. Nandwana and R. Dehoff: Met. Mat. Trans. A, 2018, Vol. 49, pp. 5107-5117.10.1007/s11661-018-4812-z ↗
9. V. A. Popovich, E. V. Borisov, A. A. Popovich, V. S. Sufiiarov, D. V. Masaylo and L. Alzina: Mat. Des., 2017, Vol. 131, pp. 12-22.10.1016/j.matdes.2017.05.065 ↗
10. SAE AMS 5663: 2016, Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 19Fe, Consumable Electrode or Vacuum Induction Melted 1775°F (968 °C) Solution and Precipitation Heat Treated.
11. T. D. McLouth, G. E. Bean, D. B. Witkin, S. D. Sitzman, P. M. Adams, D. N. Patel, W. Park, J.-M. Yang and R. Zaldivar: Mat. Des., 2018, Vol. 149, pp. 205-213.10.1016/j.matdes.2018.04.019 ↗
12. G. E. Bean, D. B. Witkin, T. D. McLouth, D. N. Patel and R. J. Zaldivar: Add. Mfg., 2018, Vol. 22, pp. 207-215.10.1016/j.addma.2018.04.024 ↗
13. S. Azadian, L.-Y. Wei and R. Warren: Mat. Char., 2004, Vol. 53, pp. 7-16.10.1016/j.matchar.2004.07.004 ↗
14. D. Cai, W. Zhang, P. Nie, W. Liu and M. Yao: Mat. Char., 2007, Vol. 58, pp. 220-225.10.1016/j.matchar.2006.04.020 ↗
15. J. F. Muller and M. J. Donachie: Met. Trans. A, 1975, Vol. 6, pp. 2221-2227.10.1007/BF02818647 ↗
16. WHO (2011) Standard Test Methods for Tension Testing of Metallic Materials. West Conshohocken: ASTM
17. WHO (2017) Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials. West Conshohocken: ASTM
18. WHO (2009) Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials. West Conshohocken: ASTM.
19. WHO (2018) Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials. West Conshohocken: ASTM.
20. S. Srinivas, D. V. V. Satyanarayana, D. Gopikrishna and M. C. Pandey: Scripta Met. Mat., 1994, Vol. 32, pp. 1145-1148.10.1016/0956-716X(95)00115-C ↗
21. R. W. Hayes, D. F. Smith, E. A. Wanner and J. C. Earthman: Mat. Sci. Eng. A, 1994, Vol. 177, pp. 43-53.10.1016/0921-5093(94)90476-6 ↗
22. G. E. Bean, T. D. McLouth, D. B. Witkin, S. D. Sitzman, P. M. Adams and R. J. Zaldivar: J. Mater. Eng. Perform., 2019, Vol. 28, pp. 1942-1949.10.1007/s11665-019-03980-w ↗
23. United States Department of Defense, MIL-HDBK-5: Metallic Materials and Elements for Aerospace Vehicle Structures, Rev. J., 2003
24. R. Vincent: Acta Met., 1985, Vol. 33, pp. 1205-1216.10.1016/0001-6160(85)90231-7 ↗
25. J.J. Schirra, R.H. Caless, and R. W. Hatala: Superalloys 718 625 Var. Deriv., 1991, pp. 375–388.
26. W. M. Tucho, P. Cuvillier, A. Sjolyst-Kverneland and V. Hansen: Mat. Scie. Eng. A, 2017, Vol. 689, pp. 220-232.10.1016/j.msea.2017.02.062 ↗
27. H. Ghonem, T. Nicholas and A. Pineau: Fatigue Fracture Eng. Mat. Struct., 1993, Vol. 16, pp. 577-590.10.1111/j.1460-2695.1993.tb00103.x ↗
28. X. J. Pang, D. J. Dwyer, M. Gao, P. Valerio and R. P. Wei: Scripta Met. Mat., 1994, Vol. 31, pp. 345-350.10.1016/0956-716X(94)90294-1 ↗
29. M. Gao, D. J. Dwyer and R. P. Wei: Scripta Met. Mat., 1995, Vol. 32, pp. 1169-1174.10.1016/0956-716X(95)00120-K ↗
30. C. F. Miller, G. W. Simmons and R. P. Wei: Scripta Mat., 2000, Vol. 42, pp. 227-232.10.1016/S1359-6462(99)00336-X ↗
31. J. P. Pedron and A. Pineau: Mat. Sci. Eng., 1982, Vol. 56, pp. 143-156.10.1016/0025-5416(82)90167-7 ↗
32. D. J. Wilson: Trans. ASME, 1973, Vol. 95, pp. 112-123.10.1115/1.3450097 ↗
33. G.D. Janaki-Ram, A.V. Reddy, K.P. Rao, G.M. Reddy and J.K.S. Sundar: J. Mater. Proc. Tech., 2015, Vol. 167, pp. 73–82.10.1016/j.jmatprotec.2004.09.081 ↗
34. H. Qi, M. Azer and A. Ritter: Met. Mat. Trans. A, 2009, Vol. 40, pp. 2410-2422.10.1007/s11661-009-9949-3 ↗
35. S. Sui, J. Chen, E. Fan, H. Yang, X. Lin and W. Huang: Mat. Sci. Eng. A, 2017, Vol. 695, pp. 6-13.10.1016/j.msea.2017.03.098 ↗
36. K. Sivaprasad and S.G. Sundara-Raman: Metall. Mater. Trans. A, 2008, Vol. 39A, pp. 2115-2127.10.1007/s11661-008-9553-y ↗
37. W. D. Nix, J. C. Earthman, G. Eggeler and B. Ilschner: Acta Met., 1989, Vol. 37, pp. 1067-1077.10.1016/0001-6160(89)90103-X ↗
38. McLouth 2019, Unpublished results.
39. G. Sjoberg, N.-G. Ingesten, and R.G. Carlson: Superalloys 718 625 Var. Deriv., 1991, pp. 603–20
40. A.K. Koul, P. Au, N. Bellinger, R. Thamburaj, W. Wallace, and J.-P. Immargien: Superalloys 1988, pp. 3–12
41. M. E. Aydinoz, F. Brenne, M. Schaper, C. Schaak, W. Tillmann, J. Nellesen and T. Niendorf: Mat. Sci. Eng. A, 2016, Vol. 669, pp. 246-258.10.1016/j.msea.2016.05.089 ↗
42. R. Raj and M. F. Ashby: Met. Trans., 1971, Vol. 2, pp. 1113-1127.10.1007/BF02664244 ↗
43. B. Shassere, Y. Yamamoto, J. Poplawsky, W. Guo and S. Babu: Met. Mat. Trans. A, 2017, Vol. 48, pp. 4598-4614.10.1007/s11661-017-4274-8 ↗
44. S. G. K. Manikandan, D. Sivakumar, K. Prasad-Rao and M. Kamaraj: J. Mater. Proc. Tech., 2014, Vol. 214, pp. 358-364.10.1016/j.jmatprotec.2013.09.006 ↗
45. H. Xiao, S. Li, X. Han, J. Mazumder and L. Song: Mat. Des., 2017, Vol. 122, pp. 330-339.10.1016/j.matdes.2017.03.004 ↗
46. Y. Tian, D. McAllister, H. Colijn, M. Mills, D. Farson, M. Nordin and S. Babu: Met. Mat. Trans. A, 2014, Vol. 45, pp. 4470-4483.10.1007/s11661-014-2370-6 ↗
47. L. L. Parimi, G. A. Ravi, D. Clark and M. A. Attallah: Mat. Char., 2014, Vol. 89, pp. 102-111.10.1016/j.matchar.2013.12.012 ↗
48. Y. Zhang, Z. Li, P. Nie and Y. Wu: Met. Mat. Trans. A, 2013, Vol. 44, pp. 5513-5521.10.1007/s11661-013-1903-8 ↗