Microstructural, Mechanical, and Damping Properties of a Cu-Based Shape Memory Alloy Refined by an In Situ LaB6/Al Inoculant
Source abstract
Abstract
In order to solve the problem of intergranular brittle fracture of Cu-based shape memory alloys (SMAs) and further improve their mechanical properties, an in situ LaB6/Al inoculant was designed and used for the first time to significantly refine the grains of a CuAlMn SMA. Through phase analysis, microscopic observation, and theoretical calculation, it was confirmed that the LaB6 particles in the inoculant could act as efficient heterogeneous nuclei of the CuAlMn SMA. The evolution of microstructures with grain refinement and its influence on the mechanical and damping properties were also investigated. It was found that with the decrease of the average grain size, the martensite structure of the CuAlMn SMA was also dramatically refined. Consequently, because of the increase of phase interface density, the damping capacity of the CuAlMn SMA was improved and the elongation, tensile strength, and yield strength were also significantly improved due to the principle of fine grain strengthening. After hot rolling, the average grain size of the refined CuAlMn SMA increased slightly, while the damping, tensile strength, and elongation were further improved, which has been ascribed to the elimination of casting defects and the increase of density.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Intermetallics and Advanced Alloy Properties · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. N. Koeda, T. Omori, Y. Sutou, H. Suzuki, M. Wakita, R. Kainuma, and K. Ishida: Mater. Trans., 2005, vol. 46, pp. 118–22.10.2320/matertrans.46.118 ↗
2. B. Kaouache, S. Berveiller, K. Inal, A. Eberhardt, and E. Patoor: Mater. Sci. Eng. A, 2004, vol. 378, pp. 232–37.10.1016/j.msea.2003.10.348 ↗
3. S.K. Vajpai, R.K. Dube, P. Chatterjee, and S. Sangal: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 2484–99.10.1007/s11661-012-1081-0 ↗
4. Y. Sutou, T. Omori, K. Yamauchi, N. Ono, R. Kainuma, and K. Ishida: Acta Mater., 2005, vol. 53, pp. 4121–33.10.1016/j.actamat.2005.05.013 ↗
5. J.P. Oliveira, Z. Zeng, C. Andrei, F.M. Braz-Fernandes, R.M. Miranda, A.J. Ramirez, T. Omori, and N. Zhou: Mater. Des., 2017, vol. 128, pp. 166–75.10.1016/j.matdes.2017.05.011 ↗
6. J.S. Luo, T. Voisin, J.P. Monchoux, and A. Couret: Intermetallics, 2013, vol. 36, pp. 12–20.10.1016/j.intermet.2012.12.006 ↗
7. S.N. Saud, E. Hamzah, T. Abubakar, H.R. Bakhsheshi-Rad, and M.N. Mohammed: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 5242–55.10.1007/s11661-016-3628-y ↗
8. V. Sampath: Mater. Manuf. Proc., 2006, vol. 21, pp. 789–95.10.1080/10426910600837756 ↗
9. Y. Sutou, T. Omori, N. Koeda, R. Kainuma, and K. Ishida: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 743–46.10.1016/j.msea.2006.02.085 ↗
10. Y. Sutou, T. Omori, T. Okamoto, R. Kainuma, and K. Ishida: J. Phys., 2001, vol. 11, pp. 185–90.
11. S.Y. Yang, F. Zhang, J.L. Wu, Y. Lu, Z. Shi, C.P. Wang, and X.J. Liu: Mater. Des., 2017, vol. 115, pp. 17–25.10.1016/j.matdes.2016.11.035 ↗
12. C.A. Canbay, S. Ozgen, and Z.K. Genc: Appl. Phys. A, 2014, vol. 117, pp. 767–71.10.1007/s00339-014-8643-5 ↗
13. C.A. Canbay, Z.K. Genc, and M. Sekerci: Appl. Phys. A, 2014, vol. 115, pp. 371–77.10.1007/s00339-014-8383-6 ↗
14. J.L. Liu, H.Y. Huang, and J.X. Xie: Mater. Des., 2015, vol. 85, pp. 211–20.10.1016/j.matdes.2015.06.114 ↗
15. J.P. Oliveira, B. Panton, Z. Zeng, T. Omori, Y. Zhou, R.M. Miranda, and F.M. Braz Fernandes: Mater. Des., 2016, vol. 90, pp. 122–28.10.1016/j.matdes.2015.10.125 ↗
16. J.P. Oliveira, Z. Zeng, T. Omori, N. Zhou, R.M. Miranda, and F.M. Braz Fernandes: Mater. Des., 2016, vol. 98, pp. 280–84.10.1016/j.matdes.2016.03.032 ↗
17. N. Li, X.J. Liu, Q.Z. Wang, C.X. Cui, F.X. Yin, X.W. Ji, and Z.X. Jiao: Mater. Des., 2017, vol. 127, pp. 97–105.10.1016/j.matdes.2017.04.068 ↗
18. Q.Z. Wang, F.S. Han, and Q. Wang: Phys. Status Solidi (a), 2004, vol. 201, pp. 2910–14.10.1002/pssa.200406885 ↗
19. B. Gencturk, Y. Araki, T. Kusama, T. Omori, R. Kainuma, and F. Medina: Constr. Build. Mater., 2014, vol. 53, pp. 555–60.10.1016/j.conbuildmat.2013.12.002 ↗
20. Z. Xiao, M. Fang, Z. Li, T. Xiao, and Q. Lei: Mater. Des., 2014, vol. 58, pp. 451–56.10.1016/j.matdes.2014.02.029 ↗
21. S. Xu, H.Y Huang, J.X. Xie, Y. Kimura, X, Xu, T. Omori, and R. Kainuma: Metals, 2017, vol. 7, pp. 141–48.10.3390/met7040141 ↗
22. J. Chen, Z. Li, and Y.Y. Zhao: J. Alloys Compd., 2009, vol. 480, pp. 481–84.10.1016/j.jallcom.2009.01.104 ↗
23. B.L. Bramfitt: Metall. Trans., 1970, vol. 1, pp. 1987–95.10.1007/BF02642799 ↗
24. X.M. Pan, X.F. Bian, J.Y. Qing, and W.M. Wang: Acta Phys. Chim. Sin., 2001, vol. 17, pp. 708–12 (in Chinese).10.3866/PKU.WHXB20010808 ↗
25. M. Easton and D. Stjohn: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1613–23.10.1007/s11661-999-0098-5 ↗
26. M. Easton and D. Stjohn: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1625–33.10.1007/s11661-999-0099-4 ↗
27. X.L. Lu, F. Chen, W.S. Li, and Y.F. Zheng: J. Alloys Compds., 2009, vol. 480, pp. 608–11.10.1016/j.jallcom.2009.01.134 ↗
28. C.A. Hsu, W.H. Wang, Y.F. Hsu, and W.P. Rehbach: J. Alloys Compds., 2009, vol. 474, pp. 455–62.10.1016/j.jallcom.2008.06.109 ↗
29. P. Zhang, A.B. Ma, S. Lu, P.H. Lin, J.H. Jiang, H. Ma, and C.L. Chu: Mater. Lett., 2009, vol. 63, pp. 2676–79.10.1016/j.matlet.2009.09.037 ↗
30. I.G. Ritchie and Z.L. Pan: Metall. Trans. A, 1991, vol. 22A, pp. 607–16.10.1007/BF02670281 ↗
31. J. Chen, Z. Li, and Y.Y. Zhao: J. Alloys Compds., 2009, vol. 480, pp. 481–84.10.1016/j.jallcom.2009.01.104 ↗
32. Q.Z. Wang, D.M. Lu, C.X. Cui, W.J. Liu, M. Xu, and J. Yang: Mater. Sci. Eng. A, 2014, vol. 615, pp. 278–82.10.1016/j.msea.2014.07.080 ↗
33. E.M. Mazzer, C.S. Kiminami, C. Bolfarini, R.D. Cava, W.J. Botta, P. Gargarella, F. Audebert, and M. Galano: Mater. Sci. Eng. A, 2016, vol. 663, pp. 64–68.10.1016/j.msea.2016.03.017 ↗
34. B.L. Liu, Z.L. Liu, X.Q. Liu, W.J. Wang, and L.H. Wang: J. Alloys Compd., 2013, vol. 578, pp. 373–79.10.1016/j.jallcom.2013.05.164 ↗
35. Y.N. Wang, W.Y. Sun, X.H. Chen, H.M. Shen, and B.S. Lu: Phys. Status Solidi (a), 1987, vol. 102, pp. 279–85.10.1002/pssa.2211020128 ↗