journal article·2018-09

Creep Property and Phase Stability of Sulfur-Doped Ni-Base Single-Crystal Superalloys and Effectiveness of CaO Desulfurization

Satoshi Utada, Yuichiro Joh, Makoto Osawa, Tadaharu Yokokawa, Takuya Sugiyama, Toshiharu Kobayashi, Kyoko Kawagishi, Shinsuke Suzuki, Hiroshi Harada

Publisher page

Abstract

The direct and complete recycling method for Ni-base superalloy is being developed and studied to reduce the material cost for cost-effective operation of gas turbine systems. Understanding the effect of sulfur contamination is important to determine allowable sulfur content after the recycling. However, in the case of single-crystal superalloys, this effect on material properties is not well known except for the detrimental effect on the oxidation resistance. In the present study, creep tests, aging tests, and cyclic oxidation tests have been performed on PWA1484 with varying sulfur content. The increasing sulfur content has been found to correlate with degradation of properties evaluated here. It is observed that the decrease in creep life in PWA1484 due to sulfur doping is primarily due to coarsening of the γ/γ′ interfacial dislocation network, increase in precipitation kinetics of topologically closed-packed phase, and decrease in oxidation resistance. For recycling purposes, a CaO crucible was used in the casting process, which successfully decreased the sulfur level in the alloy, and the resulting material showed comparable or even better properties in comparison to the low sulfur content material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. K. Kawagishi, A. Yeh, T. Yokokawa, T. Kobayashi, Y. Koizumi, and H. Harada: Superalloys 2012, TMS, Seven Springs, Champion, PA, 2012, pp. 189–95.10.1002/9781118516430.ch21 ↗
2. T. Yokokawa, H. Harada, Y. Mori, K. Kawagishi, Y. Koizumi, T. Kobayashi, M. Yuyama, and S. Suzuki: Superalloys 2016, TMS, Seven Springs, Champion, PA, 2016, pp. 123–30.10.1002/9781119075646.ch14 ↗
3. S. Utada, Y. Joh, M. Osawa, T. Yokokawa, T. Kobayashi, K. Kawagishi, S. Suzuki, and H. Harada: Int. Gas Turbine Congr. 2015 Tokyo, 2015, pp. 1039–43.
4. S. Utada, Y. Joh, M. Osawa, T. Yokokawa, T. Kobayashi, K. Kawagishi, S. Suzuki, and H. Harada: Superalloys 2016, TMS, Seven Springs, Champion, PA, 2016, pp. 591–99.
5. R.T. Holt and W. Wallace: Int. Met. Rev., 1976, vol. 21, pp. 1–24.10.1179/imr.1976.21.1.1 ↗
6. R. Schlatter: Superalloys 1972, Seven Springs, Champion, PA, 1972, pp. A1–40.10.7449/1972/Superalloys_1972_A-1_A-40 ↗
7. M.A. Smith, W.E. Frazier, and B.A. Pregger: Mater. Sci. Eng. A, 1995, vol. A203, pp. 388–98.10.1016/0921-5093(95)09819-4 ↗
8. C. Sarioglu, C. Stinner, J.R. Blachere, N. Birks, F.S. Pettit, G.H. Meier, and J.L. Smialek: Superalloys 1996, TMS, Seven Springs, Champion, PA, 1996, pp. 71–81.
9. J.L. Smialek: ASME 1996 Int. Gas Turbine and Aeroengine Congr. Exhib., 1996, p. V005T12A016.
10. J.L. Smialek and B.A. Pint: Mater. Sci. Forum, 2001, vols. 369–372, pp. 459–66.10.4028/www.scientific.net/MSF.369-372.459 ↗
11. Y. Joh, T. Kobayashi, T. Yokokawa, K. Kawagishi, M. Osawa, S. Suzuki, and H. Harada: 10th Liege Conf.: Materials for Advanced Power Engineering 2014, 2014, pp. 538–44.
12. Y. Joh, S. Utada, M. Osawa, T. Kobayashi, T. Yokokawa, K. Kawagishi, S. Suzuki, and H. Harada: Mater. Trans., 2016, vol. 57, pp. 1305–08.10.2320/matertrans.M2016032 ↗
13. L. Peng, P. Peng, D.D. Wen, Y.G. Liu, H. Wei, X.F. Sun, and Z.Q. Hu: Model. Simul. Mater. Sci. Eng., 2011, vol. 19, p. 65002.10.1088/0965-0393/19/6/065002 ↗
14. K. Kawagishi, R. Zhu, T. Yokokawa, T. Kobayashi, Y. Koizumi, M. Yuyama, and H. Harada: 10th Liege Conf.: Materials for Advanced Power Engineering 2014, 2014, pp. 532–37.
15. K. Kawagishi, T. Yokokawa, T. Kobayashi, Y. Koizumi, M. Sakamoto, M. Yuyama, H. Harada, I. Okada, M. Taneike, and H. Oguma: Superalloys 2016, TMS, Seven Springs, Champion, PA, 2016, pp. 115–22.10.1002/9781119075646.ch13 ↗
16. A.D. Cetel and D.N. Duhl: Superalloys 1988, Seven Springs, Champion, PA, 1988, pp. 235–44.10.7449/1988/Superalloys_1988_235_244 ↗
17. R.J. Fruehan: Metall. Trans. B, 1978, vol. 9B, pp. 287–92.10.1007/BF02653694 ↗
18. T. Degawa and T. Ototani: Tetsu-to-Hagané, 1987, vol. 73, pp. 1684–90.10.2355/tetsutohagane1955.73.14_1684 ↗
19. T. Iguchi, Y. Kishimoto, S. Utada, S. Suzuki, Y. Mori, T. Yokokawa, H. Harada, T. Kobayashi, and K. Kawagishi: Waseda University and National Institute for Materials Science, Japan, unpublished research, 2018.
20. T. Yamagata, H. Harada, S. Nakazawa, M. Yamazaki, and Y.G. Nakagawa: Superalloys 1984, Seven Springs, Champion, PA, 1984, pp. 157–66.10.7449/1984/Superalloys_1984_157_166 ↗
21. R. Darolia, D.F. Lahrman, R.D. Field, and R. Sisson: Superalloys 1988, Seven Springs, Champion, PA, 1988, pp. 255–64.10.7449/1988/Superalloys_1988_255_264 ↗
22. J.X. Zhang, T. Murakumo, H. Harada, and Y. Koizumi: Scripta Mater., 2003, vol. 48, pp. 287–93.10.1016/S1359-6462(02)00379-2 ↗
23. J. Zhang, J. Wang, H. Harada, and Y. Koizumi: Acta Mater., 2005, vol. 53, pp. 4623–33.10.1016/j.actamat.2005.06.013 ↗
24. A.F. Giamei and D.L. Anton: Metall. Trans. A, 1985, vol. 16A, pp. 1997–2005.10.1007/BF02662400 ↗
25. W.Z. Wang, T. Jin, J.L. Liu, X.F. Sun, H.R. Guan, and Z.Q. Hu: Mater. Sci. Eng. A, 2008, vol. 479, pp. 148–56.10.1016/j.msea.2007.06.031 ↗
26. E. Mabruri, S. Sakurai, Y. Murata, T. Koyama, and M. Morinaga: Mater. Trans., 2008, vol. 49, pp. 792–99.10.2320/matertrans.MRA2007283 ↗
27. H. Mughrabim, W. Schneider, V. Sass, and C. Lang: 10th International Conference on the Strength of Materials, 1994, pp. 705–08.
28. V. Seetharaman and A.D. Cetel: Superalloys 2004, TMS, Seven Springs, Champion, PA, 2004, pp. 207–14.10.7449/2004/Superalloys_2004_207_214 ↗
29. A. Srivastava, S. Gopagoni, A. Needleman, V. Seetharaman, A. Staroselsky, and R. Banerjee: Acta Mater., 2012, vol. 60, pp. 5697–5711.10.1016/j.actamat.2012.06.043 ↗
30. T. Murakumo, Y. Koizumi, K. Kobayashi, and H. Harada: Superalloys 2004, TMS, Seven Springs, Champion, PA, 2004, pp. 155–62.10.7449/2004/Superalloys_2004_155_162 ↗
31. M. Pessah, P. Caron, and T. Khan: Superalloys 1992, TMS, Seven Springs, Champion, PA, 1992, pp. 567–76.
32. C. Rae, M. Karunaratne, C. Small, R. Broomfield, C. Jones, and R. Reed: Superalloys 2000, TMS, Seven Springs, Champion, PA, 2000, pp. 767–76.10.7449/2000/Superalloys_2000_767_776 ↗
33. S. Tin, T.M. Pollock, and W.T. King: Superalloys 2000, TMS, Seven Springs, Champion, PA, 2000, pp. 201–10.10.7449/2000/Superalloys_2000_201_210 ↗
34. S. Tin and T.M. Pollock: Mater. Sci. Eng. A, 2003, vol. 348, pp. 111–21.10.1016/S0921-5093(02)00637-8 ↗
35. L.R. Liu, T. Jin, N.R. Zhao, Z.H. Wang, X.F. Sun, H.R. Guan, and Z.Q. Hu: Mater. Lett., 2004, vol. 58, pp. 2290–94.10.1016/j.matlet.2004.01.038 ↗
36. H.D. Brody and M.C. Flemings: Trans. TMS-AIME, 1966, vol. 236, pp. 615–24.
37. A.-C. Yeh, A. Sato, T. Kobayashi, and H. Harada: Mater. Sci. Eng. A, 2008, vol. 490, pp. 445–51.10.1016/j.msea.2008.02.008 ↗
38. K. Cheng, C. Jo, T. Jin, and Z. Hu: J. Alloys Compd., 2011, vol. 509, pp. 7078–86.10.1016/j.jallcom.2011.04.001 ↗
39. M. Allart, F. Christien, and R. Le Gall: Acta Mater., 2013, vol. 61, pp. 7938–46.10.1016/j.actamat.2013.09.035 ↗
40. I.L. Lomaev, D.L. Novikov, S. V Okatov, Y.N. Gornostyrev, A. Cetel, M. Maloney, R. Montero, and S.F. Burlatsky: Acta Mater., 2014, vol. 67, pp. 95–101.10.1016/j.actamat.2013.12.021 ↗
41. J.J. DeBarbadillo: Superalloys 1976, Seven Springs, Champion, PA, 1976, pp. 95–107.10.7449/1976/Superalloys_1976_95_107 ↗
42. T. Fujioka, M. Kinugasa, and S. Iizumi: Superalloys 1976, Seven Springs, Champion, PA, 1976, pp. 159–69.10.7449/1976/Superalloys_1976_159_169 ↗