journal article·2018-08

A Processing Route for Achieving Isotropic Tensile Properties in Laser Solid Formed α+β Titanium Alloy

Qiang Zhang, Jing Chen, Zhongliang Qi, Xin Lin, Hua Tan, Weidong Huang

Publisher page

Abstract

A two-step processing route for achieving isotropic tensile properties in laser solid formed (LSF) α+β titanium alloy is proposed. Titanium alloy parts containing equiaxed prior β grains and relative homogeneous α laths were obtained by adjusting the LSF processing parameters and the post heat treatment conditions, respectively. The microstructure and texture characteristics of the LSFed titanium alloy under different heat treatment conditions were investigated. The room temperature tensile tests were performed at various loaded angles with respect to the building direction. The results showed that the prior β grains are close to isotropic both in morphology and texture. The scale and volume fraction of the α laths vary with the heat treatment conditions. The tensile properties are anisotropic after the aging treatment, while the tensile properties are isotropic after the solution + aging treatments. The fracture surface and microstructure analysis indicated that the anisotropy in the tensile properties is directly related to the heterogeneous α laths in the aging-treated specimens. The isotropic tensile properties in the LSFed titanium alloys could be achieved by adopting the processing route proposed in the present study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. D. Banerjee and J.C. Williams: Acta Mater., 2013, vol. 61, pp. 844–79.10.1016/j.actamat.2012.10.043 ↗
2. 2. Lütjering G, Williams JC (2007) Titanium. Springer, Berlin
3. W.D. Huang and X. Lin: Addit. Manuf., 2014, vol. 1, pp. 156–65.
4. F.C. Liu, X. Lin, C.P. Huang, M.H. Song, G.L. Yang, J. Chen, and W.D. Huang: J. Alloys Compd., 2011, vol. 509, pp. 4505–09.10.1016/j.jallcom.2010.11.176 ↗
5. Y.Z. Zhang, M.Z. Xi, S.Y. Gao and L.K. Shi: J. Mater. Process. Tech., 2003, vol. 142, pp. 582-85.10.1016/S0924-0136(03)00663-0 ↗
6. Y. Kok, X.P. Tan, P. Wang, M.L.S. Nai, N.H. Loh, E. Liu, and S.B. Tor: Mater. Des., 2018, vol. 139, pp.565-86.10.1016/j.matdes.2017.11.021 ↗
7. J.J. Lewandowski and M. Seifi: Annu. Rev. Mater. Res., 2016, vol. 46, pp. 151–86.10.1146/annurev-matsci-070115-032024 ↗
8. P.A. Kobryn, E.H. Moore, and S.L. Semiatin: Scr. Mater., 2000, vol. 43, pp. 299–305.10.1016/S1359-6462(00)00408-5 ↗
9. S.S. Al-Bermani, M.L. Blackmore, W. Zhang, and I. Todd: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2010, vol. 41, pp. 3422–34.10.1007/s11661-010-0397-x ↗
10. L.J Song, H. Xiao, J.Y. Ye and S.M. Li: Surf. Coat. Tech., 2016, vol. 307, pp. 761-71.10.1016/j.surfcoat.2016.10.007 ↗
11. E. Brandl, F. Palm, V. Michailov, B. Viehweger, and C. Leyens: Mater. Des., 2011, vol. 32, pp. 4665–75.10.1016/j.matdes.2011.06.062 ↗
12. B. Baufeld: Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 2012, vol. 226, pp. 126–36.10.1177/0954405411403669 ↗
13. S.M. Kelly and S.L. Kampe: Metall. Mater. Trans. A, 2004, vol. 35, pp. 1861–67.10.1007/s11661-004-0094-8 ↗
14. S.M. Kelly and S.L. Kampe: Metall. Mater. Trans. A, 2004, vol. 35, pp. 1869–79.10.1007/s11661-004-0095-7 ↗
15. Crespo: In Convection and Conduction Heat Transfer, (InTech: 2011), pp. 315-40.
16. Q. Zhang, J. Chen, H. Tan, X. Lin, and W.D. Huang: Trans. Nonferrous Met. Soc. China, 2016, vol. 26, pp. 2058–66.10.1016/S1003-6326(16)64300-5 ↗
17. C.L. Qiu, N.J.E. Adkins, and M.M. Attallah: Mater. Sci. Eng. A, 2013, vol. 578, pp. 230–39.10.1016/j.msea.2013.04.099 ↗
18. W. Xu, M. Brandt, S. Sun, J. Elambasseril, Q. Liu, K. Latham, K. Xia, and M. Qian: Acta Mater, 2015, vol. 85, pp. 74–84.10.1016/j.actamat.2014.11.028 ↗
19. B.E. Carroll, T.A. Palmer, and A.M. Beese: Acta Mater., 2015, vol. 87, pp. 309–20.10.1016/j.actamat.2014.12.054 ↗
20. P.L. Blackwell and A. Wisbey: J. Mater. Process. Technol., 2005, vol. 170, pp. 268–76.10.1016/j.jmatprotec.2005.05.014 ↗
21. A.E. Wilson-Heid, Z.Q. Wang, B. McCornac, and A.M. Beese: Mater. Sci. Eng. A, 2017, vol. 706, pp. 287–94.10.1016/j.msea.2017.09.017 ↗
22. T. Vilaro, C. Colin, and J.D. Bartout: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2011, vol. 42, pp. 3190–99.10.1007/s11661-011-0731-y ↗
23. C.L. Qiu, G.A. Ravi, C. Dance, A. Ranson, S. Dilworth, and M.M. Attallah: J. Alloys Compd., 2015, vol. 629, pp. 351–61.10.1016/j.jallcom.2014.12.234 ↗
24. H. Galarraga, R.J. Warren, D.A. Lados, R.R. Dehoff, M.M. Kirka, and P. Nandwana: Mater. Sci. Eng. A, 2017, vol. 685, pp. 417–28.10.1016/j.msea.2017.01.019 ↗
25. S. Tammas-Williams, H. Zhao, F. Léonard, F. Derguti, I. Todd, and P.B. Prangnell: Mater. Charact., 2015, vol. 102, pp. 47–61.10.1016/j.matchar.2015.02.008 ↗
26. M. Seifi, A. Salem, D. Satko, J. Shaffer, and J.J. Lewandowski: Int. J. Fatigue, 2017, vol. 94, pp. 263–87.10.1016/j.ijfatigue.2016.06.001 ↗
27. T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, and W. Zhang: Prog. Mater. Sci., 2018, vol. 92, pp.112-224.10.1016/j.pmatsci.2017.10.001 ↗
28. B. Vrancken, L. Thijs, J.-P. Kruth, and J. Van Humbeeck: J. Alloys Compd., 2012, vol. 541, pp. 177–85.10.1016/j.jallcom.2012.07.022 ↗
29. S.Y. Zhang, X. Lin, J. Chen, and W.D. Huang: Rare Met., 2009, vol. 28, pp. 537–44.10.1007/s12598-009-0104-5 ↗
30. S.H. Mok, G. Bi, J. Folkes, I. Pashby, and J. Segal: Surf. Coatings Technol., 2008, vol. 202, pp. 4613–19.10.1016/j.surfcoat.2008.03.028 ↗
31. Y.Z. Zhang, Y.Q. Zhao., H.L. Qu, H. Li, F. Liang, H.C. Guo, D.K. Huang: Chinese J. Rare Met., 2004, vol. 28, pp. 34–8.
32. Q. Zhang, J. Chen, P.F. Guo, H. Tan, X. Lin, and W.D. Huang: Mater. Des., 2015, vol. 88, pp. 550–57.10.1016/j.matdes.2015.09.053 ↗
33. Q. Zhang, J. Chen, Z. Zhao, H. Tan, X. Lin, and W.D. Huang: Mater. Sci. Eng. A, 2016, vol. 673, pp. 204–12.10.1016/j.msea.2016.07.040 ↗
34. Q. Zhang, J. Chen, X. Lin, H. Tan, and W.D. Huang: J. Mater. Process. Technol., 2016, vol. 238, pp. 202–11.10.1016/j.jmatprotec.2016.07.011 ↗
35. Q. Zhang, J. Chen, L.L. Wang, H. Tan, X. Lin, and W.D. Huang: J. Mater. Sci. Technol., 2016, vol. 32, pp. 381–86.10.1016/j.jmst.2015.11.019 ↗
36. Q. Zhang, J. Chen, H. Tan, X. Lin, and W.D. Huang: J. Alloys Compd., 2016, vol. 666, pp. 380–86.10.1016/j.jallcom.2016.01.065 ↗
37. F. Bachmann, R. Hielscher, and H. Schaeben: Solid State Phenom., 2010, vol. 160, pp. 63–8.10.4028/www.scientific.net/SSP.160.63 ↗
38. R. Hielscher and H. Schaeben: J. Appl. Cryst., 2008, vol. 41, pp. 1024–37.10.1107/S0021889808030112 ↗
39. S. Suwas and R.K. Ray: Crystallographic Texture of Materials, Springer London, London, 2014.10.1007/978-1-4471-6314-5 ↗
40. Z. Li, J. Li, Y.Y. Zhu, X.J. Tian, and H.M Wang: J. Alloys Compd., 2016, vol. 661, pp. 126–35.10.1016/j.jallcom.2015.11.172 ↗
41. C.Sauer and G. Luetjering: J. Mater. Process. Technol., 2001, vol. 117, pp. 311–17.10.1016/S0924-0136(01)00788-9 ↗
42. S.C. Wang, M. Aindow, and M.J. Starink: Acta Mater., 2003, vol. 51, pp. 2485–503.10.1016/S1359-6454(03)00035-1 ↗
43. S. Banumathy, R.K. Mandal, and A.K. Singh: J. Alloys Compd., 2010, vol. 500, pp. 26–30.10.1016/j.jallcom.2010.04.022 ↗
44. R.J. Bourcier, D.A. Koss, R.E. Smelser, and O. Richmond: Acta Metall., 1986, vol. 34, pp. 2443–53.10.1016/0001-6160(86)90147-1 ↗
45. P. Kumar and K.S.R. Chandran: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2017, vol. 48, pp. 2301–19.10.1007/s11661-017-4009-x ↗
46. M.T. Jia, D.L. Zhang, J.M. Liang and B. Gabbitas: Metall. Mater. Trans. A., 2017, vol. 48, pp. 2015-29.10.1007/s11661-017-3965-5 ↗
47. R. Sarkar, A. Mukhopadhyay, P. Ghosal, T.K. Nandy, and K.K. Ray: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2015, vol. 46, pp. 3516–27.10.1007/s11661-015-2941-1 ↗
48. E.O. Hall: Proc. Phys. Soc. Sect. B, 1951, vol. 64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗