Combined Effect of Heating Rate and Microalloying Elements on Recrystallization During Annealing of Dual-Phase Steels
Source abstract
Abstract
Adjusting ferrite recrystallization kinetics during annealing is a way to control the final microstructure and thus the mechanical properties of advanced cold-rolled high-strength steels. Two strategies are commonly used for this purpose: adjusting heating rates and/or adding microalloying elements. The present work investigates the effect of heating rate and microalloying elements Ti, Nb, and Mo on recrystallization kinetics during annealing in various cold-rolled Dual-Phase steel grades. The use of combined experimental and modeling approaches allows a deeper understanding of the separate influence of heating rate and the addition of microalloying elements. The comparative effect of Ti, Nb, and Mo as solute elements and as precipitates on ferrite recrystallization is also clarified. It is shown that solute drag has the largest delaying effect on recrystallization in the present case and that the order of solute drag effectiveness of microalloying elements is Nb > Mo > Ti.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. N. Pottore, N. Fonstein, I. Gupta, D. Bhattacharya: Proceedings of the International Conference on Advanced High Strength Sheet Steels for Automotive Applications, 2004, pp. 119–30.
2. D.K. Matlock, G. Krauss, J.G. Speer, Mater. Sci. Forum 500-501, 2005, pp. 87-96.10.4028/www.scientific.net/MSF.500-501.87 ↗
3. W. Bleck, K. Phiou-on, Microstructure and Texture in Steels, Springer London, 2009, pp. 145-163.10.1007/978-1-84882-454-6_9 ↗
4. O. Bouaziz, H. Zurob, M. Huang, Steel research international 84, 2013, pp. 937-947.10.1002/srin.201200288 ↗
5. F.J. Humphreys, M. Hatherly, Recrystallization and Related Annealing phenomena, Elsevier Science Ltd., Oxford, 1995.
6. J. Huang, W.J. Poole, M. Militzer, Metall. Mater. Trans. A 35, 2004, pp. 3363-3375.10.1007/s11661-004-0173-x ↗
7. A. Chbihi, D. Barbier, L. Germain, A. Hazotte, M. Goune, J Mater. Sci. 49, 2014, pp. 3608-21.10.1007/s10853-014-8029-2 ↗
8. C. Philippot, J. Drillet, P. Maugis, V. Hebert, M. Dumont, Metall. Res. Technol. 111, 2014, pp. 3-8.10.1051/metal/2014004 ↗
9. D. Muljono, M. Ferry, D. P. Dunne, Mater. Sci. Eng. A 303, 2001, pp. 90-99.10.1016/S0921-5093(00)01882-7 ↗
10. S. Vervynckt, K. Verbeken, P. Thibaux, Y. Houbaert, Mater. Sci. Eng. A 528, 2011, pp. 5519-5528.10.1016/j.msea.2011.03.087 ↗
11. M. Gomez, A. Quispe, S. F. Medina, Steel Res. Int. 85, 2014, pp. 1440-45.10.1002/srin.201300356 ↗
12. H. L. Andrade, M. G. Akben, J. J. Jonas, Metall. Trans. A 14, 1983, pp.1967-77.10.1007/BF02662364 ↗
13. R. Song, N. Fonstein, H.J. Jun, N. Pottore, D. Bhattacharya, S. Jansto: Metallogr. Microstruct. Anal. 3, 2014, pp. 174-184.10.1007/s13632-014-0133-9 ↗
14. [14] C. Capdevila, T. De Cock, C. Garcia-Mateo, F. G. Caballero, C. Garcia de Andres, Mater. Sci. Forum 500-501, 2005, pp. 803-810.10.4028/www.scientific.net/MSF.500-501.803 ↗
15. J.W. Cahn, Acta Metall., 10, 1962, pp. 789-798.10.1016/0001-6160(62)90092-5 ↗
16. M. Hillert, B. Sundman, Acta Metall. 24, 1976, pp. 731-743.10.1016/0001-6160(76)90108-5 ↗
17. C.S. Smith,Trans. Metall. Soc. AIME. 175, 1948, pp. 15-51.
18. J. G. Speer, S. S. Hansen, Metall. Trans. A 20, 1989, pp. 25-38.10.1007/BF02647491 ↗
19. B. Pereda, A.I. Fernandez, B. Lopez, J.M. Rodriguez-Ibabe, ISIJ Int. 47, 2007, pp. 860-868.10.2355/isijinternational.47.860 ↗
20. M. G. Akben, I. Weiss, J. J. Jonas, Acta Metall. 29, 1981, pp. 111-121.10.1016/0001-6160(81)90092-4 ↗
21. C. Hutchinson, H. Zurob, C. Sinclair, Y. Brechet, Scripta. Mater. 59, 2008, pp. 635-637.10.1016/j.scriptamat.2008.05.036 ↗
22. S.F. Medina, C.A. Hernandez, Acta Mater. 44, 1996, pp. 165-171.10.1016/1359-6454(95)00154-6 ↗
23. A. Deschamps, Y. Brechet, Acta Mater. 47, 1998, pp. 293-305.10.1016/S1359-6454(98)00296-1 ↗
24. M. Gouné, P. Maugis, F. Danoix, Nanotechnology Reviews. 4, 2015, pp. 517-532.10.1515/ntrev-2015-0032 ↗
25. H.S. Zurob, C.R. Hutchinson, Y. Brechet, G. Purdy, Acta Mater. 50, 2002, pp. 3077-3094.10.1016/S1359-6454(02)00097-6 ↗
26. C. Sinclair, C.R. Hutchinson, Y. Brechet, Metall. Mater. Trans. A 38, 2007, pp. 821-830.10.1007/s11661-007-9106-9 ↗
27. H.S. Zurob, Y.Brechet, G. Purdy, Acta Mater. 49, 2001, pp. 4183-4190.10.1016/S1359-6454(01)00315-9 ↗
28. C. Bos, M.G. Mecozzi, J. Sietsma, Comput. Mat. Sci. 48, 2010, pp. 692-699.10.1016/j.commatsci.2010.03.010 ↗
29. D.Z. Yang, E.L. Brown, D.K. Matlock, G.Krauss, Metall. Trans. A 16, 1985, pp. 1385-1392.10.1007/BF02658671 ↗