Spinodal Decomposition in Functionally Graded Super Duplex Stainless Steel and Weld Metal
Source abstract
Abstract
Abstract Low-temperature phase separations (T < 500 °C), resulting in changes in mechanical and corrosion properties, of super duplex stainless steel (SDSS) base and weld metals were investigated for short heat treatment times (0.5 to 600 minutes). A novel heat treatment technique, where a stationary arc produces a steady state temperature gradient for selected times, was employed to fabricate functionally graded materials. Three different initial material conditions including 2507 SDSS, remelted 2507 SDSS, and 2509 SDSS weld metal were investigated. Selective etching of ferrite significantly decreased in regions heat treated at 435 °C to 480 °C already after 3 minutes due to rapid phase separations. Atom probe tomography results revealed spinodal decomposition of ferrite and precipitation of Cu particles. Microhardness mapping showed that as-welded microstructure and/or higher Ni content accelerated decomposition. The arc heat treatment technique combined with microhardness mapping and electrolytical etching was found to be a successful approach to evaluate kinetics of low-temperature phase separations in SDSS, particularly at its earlier stages. A time-temperature transformation diagram was proposed showing the kinetics of 475 °C-embrittlement in 2507 SDSS.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. L Karlsson, Weld. World 2012, vol. 56, p. 6.10.1007/BF03321380 ↗
2. J.-O. Nilsson and G. Chai, In Duplex Stainless Steel Conference, (Beaune, France, 2010);
3. C. Örnek, M. Burke, T. Hashimoto, J. Lim and D. Engelberg, Mater. Perform. Charact. 2017, vol. 6, pp. 409-436.10.1520/MPC20160088 ↗
4. C. Örnek, M. G. Burke, T. Hashimoto and D. L. Engelberg, Metall. Mater. Trans. A 2017, vol. 48, pp. 1653-1665.10.1007/s11661-016-3944-2 ↗
5. Handbook of Stainless Steel. Outokumpu Oyj, Finland, 2013.10.1016/S1365-6937(13)70329-0 ↗
6. O. Hilders and N. Zambrano, J. Microscopy. Ultrastructure. 2014, vol. 2, pp. 236-244.10.1016/j.jmau.2014.07.001 ↗
7. G Gutiérrez-Vargas, V.H. López, H. Carreón, J. Kim and A. Ruiz: AIP Conference Proceedings, AIP Publishing. 2017, p. 110018.10.1063/1.4974696 ↗
8. K.L. Weng, H.R. Chen and J.R. Yang, Mater. Sci. Eng. A 2004, vol. 379, pp. 119-132.10.1016/j.msea.2003.12.051 ↗
9. S.S.M. Tavares, R.F. De Noronha, M.R. Da Silva, J.M. Neto and S. Pairis, Mater. Res. 2001, vol. 4, pp. 237-240.10.1590/S1516-14392001000400003 ↗
10. K. Chandra, R. Singhal, V. Kain and V.S. Raja, Mater. Sci. Eng. A 2010, vol. 527, pp. 3904-3912.10.1016/j.msea.2010.02.069 ↗
11. J. Ejenstam, M. Thuvander, P. Olsson, F. Rave and P. Szakalos, J. Nucl. Mater. 2015, vol. 457, pp. 291-297.10.1016/j.jnucmat.2014.11.101 ↗
12. C. Örnek, J Walton, T. Hashimoto, T.L. Ladwein, SB Lyon and DL Engelberg, J. Electrochem. Soc. 2017, vol. 164, pp. C207-C217.10.1149/2.0311706jes ↗
13. X. Xu, J. Odqvist, M. H. Colliander, M. Thuvander, A. Steuwer, J. E. Westraadt, S. King and P. Hedstrom, Metall Mater Trans A 2016, vol. 47A, pp. 5942-5952.10.1007/s11661-016-3800-4 ↗
14. J-O. Nilsson and P. Liu, Materials science and technology 1991, vol. 7, pp. 853-862.10.1179/mst.1991.7.9.853 ↗
15. J. Zhou, J. Odqvist, M. Thuvander, S. Hertzman and P. Hedström, Acta Materialia 2012, vol. 60, pp. 5818-5827.10.1016/j.actamat.2012.07.022 ↗
16. T. F. Kelly and M. K Miller, Rev. Sci. Instrum. 2007, vol. 78, p. 031101.10.1063/1.2709758 ↗
17. L. D. Bobbio, R.A. Otis, J.P. Borgonia, R. P. Dillon, A. A. Shapiro, Z. Liu and A.M. Beese, Acta Materialia 2017, vol. 127, pp. 133-142.10.1016/j.actamat.2016.12.070 ↗
18. V.A. Hosseini, L. Karlsson, K. Hurtig, I. Choquet, D. Engelberg, M.J. Roy and C. Kumara, Mater. Des. 2017, vol. 121, pp. 11-23.10.1016/j.matdes.2017.02.042 ↗
19. 1S. Hertzman, R. Pettersson, R. Blom, E. Kivineva and J. Eriksson, ISIJ international 1996, vol. 36, pp. 968-976.10.2355/isijinternational.36.968 ↗
20. J. Zhou, J.Odqvist, M. Thuvander and P. Hedström, Microsc. Microanal. 2013, vol. 19, pp. 665-675.10.1017/S1431927613000470 ↗
21. C. Kumara: Modelling of the Temperature Field in TIG Arc Heat Treated Super Duplex Stainless Steel Samples, Master thesis, University West, Sweden, 2016.
22. N. Pettersson, S. Wessman, M.Thuvander, P.Hedström, J. Odqvist, R. Pettersson and S. Hertzman, Mater. Sci. Eng. A 2015, vol. 647, pp. 241-248.10.1016/j.msea.2015.09.009 ↗
23. J. Zhou, J. Odqvist, L. Höglund, M. Thuvander, T. Barkar and P. Hedström, Scr. Mater. 2014, vol. 75, pp. 62-65.10.1016/j.scriptamat.2013.11.020 ↗
24. B. Zhang, F. Xue, S.L. Li, X.T. Wang, N.N. Liang, Y.H. Zhao and G. Sha, Acta Mater. 2017 Vol. 140, pp. 388-397.10.1016/j.actamat.2017.08.044 ↗
25. A. Weidner, R. Kolmorgen, I. Kubena, D. Kulawinski, T. Kruml and H. Biermann, Metall. Mater. Trans. A 2016, vol. 47, pp. 2112-2124.10.1007/s11661-016-3392-z ↗
26. L. Mraz, F. Matsuda, Y. Kikuchi, N. Sakamoto and S.Kawaguchi, Trans. JWRI 1994, vol. 23, p. 10.
27. J. K. Sahu, U. Krupp, R. N. Ghosh and H. J. Christ, Mater. Sci. Eng. A 2009, vol. 508, pp. 1-14.10.1016/j.msea.2009.01.039 ↗
28. F. Danoix, J. Lacaze, A Gibert, D. Mangelinck, K. Hoummada and E. Andrieu, Ultramicroscopy 2013, vol. 132, pp. 193-198.10.1016/j.ultramic.2012.12.004 ↗
29. V.A .Hosseini, K Hurtig and L Karlsson, Mater. Corros. 2016.10.1016/j.matdes.2016.03.011 ↗
30. V.A. Hosseini, M.V. Bermejo, J. Gårdstam, K. Hurtig and L. Karlsson, Weld. World 2016, vol. 60, pp. 233-245.10.1007/s40194-016-0300-5 ↗