journal article·2018-07

Oxide Morphology of a FeCrAl Alloy, Kanthal APMT, Following Extended Aging in Air at 300 °C to 600 °C

Nan Li, Stephen S. Parker, Elizabeth S. Wood, Andrew T. Nelson

Publisher page

Abstract

Iron-chromium-aluminum (FeCrAl) alloys are of interest to the nuclear materials community due to their resistance to high-temperature steam oxidation under accident conditions. The present work investigates oxide formation at temperatures relevant to light water reactor cladding operation following extended aging to assess growth kinetics, chemical composition, and microstructure of oxide formation on a commercial FeCrAl alloy, Fe-21 wt pct Cr-5 wt pct Al-3 wt pct Mo (Kanthal APMT). Aging treatments were performed for 100 to 1000 hours in stagnant air at 300 °C, 400 °C, 500 °C, and 600 °C, respectively. Oxide growth behavior under the investigated conditions follows a logarithmic time dependence. When the oxidization temperature is 400 °C or below, the oxide is amorphous. At 500 °C, isolated crystalline regions start to appear during short period aging time and expand with extended exposures. Crystalline α-Al2O3 oxide film develops at 600 °C and the correlated logarithmic rate constant decreases significantly, indicating enhanced oxidation resistance of the formed oxide film. In addition, Mo segregation at grain boundaries has been observed when the aging temperature exceeds 500 °C. The results of this study can be viewed as an upper bounding result for potential oxide coarsening during reactor operation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Nuclear reactor physics and engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. 1. K. A. Terrani, S. J. Zinkle and L. L. Snead: J. Nucl. Mater., 2014, v. 448, pp. 420-435.10.1016/j.jnucmat.2013.06.041 ↗
2. 2. Y. Yamamoto, B. A. Pint, K. A. Terrani, K. G. Field, Y. Yang and L. L. Snead: J. Nucl. Mater., 2015, v. 467, pp. 703-716.10.1016/j.jnucmat.2015.10.019 ↗
3. 3. B. A. Pint, K. A. Terrani, M. P. Brady, T. Cheng and J. R. Keiser: J. Nucl. Mater., 2013, v. 440, pp. 420-427.10.1016/j.jnucmat.2013.05.047 ↗
4. 4. K. G. Field, S. A. Briggs, K. Sridharan, R. H. Howard and Y. Yamamoto: J. Nucl. Mater., 2017, v. 489, pp. 118-128.10.1016/j.jnucmat.2017.03.038 ↗
5. 5. K. A. Terrani, B. A. Pint, Y. J. Kim, K. A. Unocic, Y. Yang, C. M. Silva, H. M. Meyer and R. B. Rebak: J. Nucl. Mater., 2016, v. 479, pp. 36-47.10.1016/j.jnucmat.2016.06.047 ↗
6. 6. X. Hu, K. A. Terrani, B. D. Wirth and L. L. Snead: J. Nucl. Mater., 2015, v. 461, pp. 282-291.10.1016/j.jnucmat.2015.02.040 ↗
7. R. A. Causey, R. A. Karnesky and C. San Marchi, In Comprehensive Nuclear Materials (Elsevier: Oxford, 2012), pp 511-549.10.1016/B978-0-08-056033-5.00116-6 ↗
8. 8. S. E. Sadique, A. H. Mollah, M. S. Islam, M. M. Ali, M. H. H. Megat and S. Basri: Oxid. Met., 2000, v. 54, pp. 385-400.10.1023/A:1004682316408 ↗
9. 9. H. Josefsson, F. Liu, J. E. Svensson, M. Halvarsson and L. G. Johansson: Materials and Corrosion, 2005, v. 56, pp. 801-805.10.1002/maco.200503882 ↗
10. 10. N. Mott: Trans. Faraday Soc., 1939, v. 35, pp. 1175-1177.10.1039/tf9393501175 ↗
11. 11. N. Mott: Trans. Faraday Soc., 1940, v. 35, pp. 472-483.10.1039/tf9403500472 ↗
12. T. Grimley and B. Trapnell: Proc. R. Soc. A (The Royal Society: 1956), pp 405-418.10.1098/rspa.1956.0045 ↗
13. 13. P. Landsberg: J. Chem. Phys., 1955, v. 23, pp. 1079-1087.10.1063/1.1742193 ↗
14. 14. G. Halsey Jr: J. Phys. Chem., 1951, v. 55, pp. 21-26.10.1021/j150484a004 ↗
15. 15. H. H. Uhlig: Acta Metall., 1956, v. 4, pp. 541-554.10.1016/0001-6160(56)90051-7 ↗
16. V. Evans: The corrosion and oxidation of metals (Second Supplementary Volume). (1976).
17. 18. V. Tolpygo and H. Grabke: Oxid. Met., 1994, v. 41, pp. 343-364.10.1007/BF01113370 ↗
18. 19. F. Golightly, G. Wood and F. Stott: Oxid. Met., 1980, v. 14, pp. 217-234.10.1007/BF00604565 ↗
19. 20. F. Stott, G. Wood and M. Hobby: Oxid. Met., 1971, v. 3, pp. 103-113.10.1007/BF00603481 ↗
20. 21. J. K. Bunn, R. L. Fang, M. R. Albing, A. Mehta, M. J. Kramer, M. F. Besser and J. R. Hattrick-Simpers: Nanotechnology, 2015, v. 26, p. 274003.10.1088/0957-4484/26/27/274003 ↗
21. 22. B. Jönsson, Q. Lu, D. Chandrasekaran, R. Berglund and F. Rave: Oxid. Met., 2013, v. 79, pp. 29-39.10.1007/s11085-012-9324-4 ↗
22. 23. J. Smeggil and A. Shuskus: J. Vac. Sci. Technol., A 1986, v. 4, pp. 2577-2582.10.1116/1.573730 ↗
23. 24. J. Engkvist, S. Canovic, K. Hellström, A. Järdnäs, J.-E. Svensson, L.-G. Johansson, M. Olsson and M. Halvarsson: Oxid. Met., 2010, v. 73, pp. 233-253.10.1007/s11085-009-9177-7 ↗
24. G. Merceron, R. Molins, J. L. Strudel, I. Alliat and L. Menneron, In Materials science forum (Trans Tech Publ: 2001), pp 269-276.10.4028/www.scientific.net/MSF.369-372.269 ↗
25. 26. D. J. Park, H. G. Kim, J. Y. Park, Y. I. Jung, J. H. Park and Y. H. Koo: Corros. Sci., 2015, v. 94, pp. 459-465.10.1016/j.corsci.2015.02.027 ↗
26. 27. R. Chegroune, E. Salhi, A. Crisci, Y. Wouters and A. Galerie: Oxid. Met., 2008, v. 70, p. 331.10.1007/s11085-008-9126-x ↗
27. 28. C. Badini and F. Laurella: Surf. Coat. Technol., 2001, v. 135, pp. 291-298.10.1016/S0257-8972(00)00989-0 ↗
28. 29. B. A. Pint, K. A. Terrani, Y. Yamamoto and L. L. Snead: Metall. Mater. Trans. E, 2015, v. 2, pp. 190-196.
29. 30. H. E. Kadiri, R. Molins, Y. Bienvenu and M. F. Horstemeyer: Oxid. Met., 2005, v. 64, pp. 63-97.10.1007/s11085-005-5715-0 ↗
30. 31. S. Zhao, J. Zhang, D. Weng and X. Wu: Surf. Coat. Technol., 2003, v. 167, pp. 97-105.10.1016/S0257-8972(02)00859-9 ↗
31. 32. H. Götlind, F. Liu, J.-E. Svensson, M. Halvarsson and L.-G. Johansson: Oxid. Met., 2007, v. 67, pp. 251-266.10.1007/s11085-007-9055-0 ↗
32. 33. W. Quadakkers, D. Naumenko, E. Wessel, V. Kochubey and L. Singheiser: Oxid. Met., 2004, v. 61, pp. 17-37.10.1023/B:OXID.0000016274.78642.ae ↗
33. 34. E. A. Gulbransen and K. F. Andrew: J. Electrochem. Soc., 1959, v. 106, pp. 294-302.10.1149/1.2427333 ↗
34. 35. R. Cueff, H. Buscail, E. Caudron, F. Riffard, C. Issartel and S. El Messki: Appl. Surf. Sci., 2004, v. 229, pp. 233-241.10.1016/j.apsusc.2004.01.072 ↗
35. 36. J. Jedlinski: Solid State Ionics, 1997, v. 101, pp. 1033-1040.10.1016/S0167-2738(97)00299-3 ↗
36. 37. W. Quadakkers, A. Elschner, W. Speier and H. Nickel: Appl. Surf. Sci., 1991, v. 52, pp. 271-287.10.1016/0169-4332(91)90069-V ↗
37. C. Mennicke, E. Schumann, C. Ulrich and M. Rühle, In Materials science forum (Trans Tech Publ: 1997), pp 389-396.10.4028/www.scientific.net/MSF.251-254.389 ↗
38. 39. D. Naumenko, J. Le-Coze, E. Wessel, W. Fischer and W. J. Quadakkers: Mater. Trans., 2002, v. 43, pp. 168-172.10.2320/matertrans.43.168 ↗
39. 40. J. Nychka and D. Clarke: Oxid. Met., 2005, v. 63, pp. 325-352.10.1007/s11085-005-4391-4 ↗