journal article·2018-04Open access

Microstructural Characterization of the Heat-Affected Zones in Grade 92 Steel Welds: Double-Pass and Multipass Welds

X. Xu, G. D. West, J. A. Siefert, J. D. Parker, R. C. Thomson

Abstract

Abstract The microstructure in the heat-affected zone (HAZ) of multipass welds typical of those used in power plants and made from 9 wt pct chromium martensitic Grade 92 steel is complex. Therefore, there is a need for systematic microstructural investigations to define the different regions of the microstructure across the HAZ of Grade 92 steel welds manufactured using the traditional arc welding processes in order to understand possible failure mechanisms after long-term service. In this study, the microstructure in the HAZ of an as-fabricated two-pass bead-on-plate weld on a parent metal of Grade 92 steel has been systematically investigated and compared to a complex, multipass thick section weldment using an extensive range of electron and ion-microscopy-based techniques. A dilatometer has been used to apply controlled thermal cycles to simulate the microstructures in distinctly different regions in a multipass HAZ using sequential thermal cycles. A wide range of microstructural properties in the simulated materials were characterized and compared with the experimental observations from the weld HAZ. It has been found that the microstructure in the HAZ can be categorized by a combination of sequential thermal cycles experienced by the different zones within the complex weld metal, using the terminology developed for these regions based on a simpler, single-pass bead-on-plate weld, categorized as complete transformation, partial transformation, and overtempered.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. P. Ennis and A. Czyrska-Filemonowicz: Sadhana, 2003, vol. 28, pp. 709–30.10.1007/BF02706455 ↗
2. G.M. Marcello Consonni: Weld. Cutting, 2013, vol. 11, pp. 169–73.
3. X. Xu, G.D. West, J.A. Siefert, J.D. Parker, and R.C. Thomson: Metall. Mater. Trans. A, 2017, vol. 48, pp. 5396–414.10.1007/s11661-017-4306-4 ↗
4. A. Yaghi, T. Hyde, A. Becker, and W. Sun: J. Strain Anal. Eng. Des., 2008, vol. 43, pp. 275–93.10.1243/03093247JSA372 ↗
5. S. Issler, A. Klenk, A. Shibli, and J. Williams: Int. Mater. Rev., 2004, vol. 49, pp. 299–324.10.1179/095066004225021936 ↗
6. D. Deng and H. Murakawa: Comput. Mater. Sci., 2006, vol. 37, pp. 269–77.10.1016/j.commatsci.2005.07.007 ↗
7. J. Gianetto, J. Braid, J. Bowker, and W. Tyson: J. Offshore Mech. Arct., 1997, vol. 119, pp. 134–44.10.1115/1.2829055 ↗
8. S. Mannan and K. Laha: Trans. Ind. Inst. Met., 1996, vol. 49, pp. 303–20.
9. K. Laha, K. Chandravathi, P. Parameswaran, K.B.S. Rao, and S. Mannan: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 58–68.10.1007/s11661-006-9050-0 ↗
10. K. Chandravathi, K. Laha, K. Bhanu Sankara Rao, and S. Mannan: Mater. Sci. Technol., 2001, vol. 17, pp. 559–65.10.1179/026708301101510212 ↗
11. K. Shinozaki, D. Li, H. Kuroki, H. Harada, K. Ohishi, and T. Sato: Sci. Technol. Weld. Join., 2003, vol. 8, pp. 289–95.10.1179/136217103225005444 ↗
12. Y. Liu, S. Tsukamoto, T. Shirane, and F. Abe: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4626–33.10.1007/s11661-013-1801-0 ↗
13. D. Li, K. Shinozaki, H. Harada, and K. Ohishi: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 107–15.10.1007/s11661-005-0143-y ↗
14. H. Schuller, L. Hagn, and A. Woitscheck: Maschinenschaden, 1974, vol. 47, pp. 1–13.
15. J. Francis, W. Mazur, and H. Bhadeshia: Mater. Sci. Technol., 2006, vol. 22, pp. 1387–95.10.1179/174328406X148778 ↗
16. T. Sakthivel, M. Vasudevan, K. Laha, P. Parameswaran, K. Chandravathi, S.P. Selvi, V. Maduraimuthu, and M. Mathew: Mater. Sci. Eng., A, 2014, vol. 591, pp. 111–20.10.1016/j.msea.2013.10.071 ↗
17. R.C. Maclachlan, J.J. Sanchez-Hanton, and R.C. Thomson: Advances in Materials Technology for Fossil Power Plants: Proc. 6th Int. Conf., ASM International, Materials Park, OH, 2011, pp. 787–99.10.31399/asm.cp.am-epri-2010p0787 ↗
18. J. Robson and H. Bhadeshia: Mater. Sci. Technol., 1997, vol. 13, pp. 631–39.10.1179/mst.1997.13.8.631 ↗
19. W.B. Jones, C. Hills, and D. Polonis: Metall. Trans. A, 1991, vol. 22A, pp. 1049–58.10.1007/BF02661098 ↗
20. A. Inoue and T. Masumoto: Metall. Trans. A, 1980, vol. 11A, pp. 739–47.10.1007/BF02661203 ↗
21. K. Sawada, T. Hara, M. Tabuchi, K. Kimura, and K. Kubushiro: Mater. Charact., 2015, vol. 101, pp. 106–13.10.1016/j.matchar.2015.01.013 ↗
22. H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279–88.10.1016/j.actamat.2005.11.001 ↗
23. L. Ryde: Mater. Sci. Technol., 2006, vol. 22, pp. 1297–1306.10.1179/174328406X130948 ↗
24. K. Kaneko, S. Matsumura, A. Sadakata, K. Fujita, W. Moon, S. Ozaki, N. Nishimura, and Y. Tomokiyo: Mater. Sci. Eng., A, 2004, vol. 374, pp. 82–89.10.1016/j.msea.2003.12.065 ↗
25. M. Yaguchi, T. Matsumura, and K. Hoshino: Proc. ASME 2012 Pressure Vessels and Piping Conf., Volume 6: Materials and Fabrication, ASME, New York, NY, 2012, pp. 317–26.
26. J. Lee and K. Maruyama: Met. Mater. Int., 2015, vol. 21 (4), pp. 639–45.10.1007/s12540-015-4569-5 ↗