journal article·2018-02

Use of Hot Rolling for Generating Low Deviation Twins and a Disconnected Random Boundary Network in Inconel 600 Alloy

Sandeep Sahu, Prabhat Chand Yadav, Shashank Shekhar

Publisher page

Abstract

In this investigation, Inconel 600 alloy was thermomechanically processed to different strains via hot rolling followed by a short-time annealing treatment to determine an appropriate thermomechanical process to achieve a high fraction of low-Σ CSL boundaries. Experimental results demonstrate that a certain level of deformation is necessary to obtain effective “grain boundary engineering”; i.e., the deformation must be sufficiently high to provide the required driving force for postdeformation static recrystallization, yet it should be low enough to retain a large fraction of original twin boundaries. Samples processed in such a fashion exhibited 77 pct length fraction of low-Σ CSL boundaries, a dominant fraction of which was from Σ3 (~ 64 pct), the latter with very low deviation from its theoretical misorientation. The application of hot rolling also resulted in a very low fraction of Σ1 (~ 1 pct) boundaries, as desired. The process also leads to so-called “triple junction engineering” with the generation of special triple junctions, which are very effective in disrupting the connectivity of the random grain boundary network.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. T. Watanabe: Mater. Sci. Eng. A, 1993, vol. 166, pp. 11–28.10.1016/0921-5093(93)90306-Y ↗
2. V. Randle: Acta Mater., 1999, vol. 47, pp. 4187–96.10.1016/S1359-6454(99)00277-3 ↗
3. M.A. Arafin and J.A. Szpunar: Corros. Sci., 2009, vol. 51, pp. 119–28.10.1016/j.corsci.2008.10.006 ↗
4. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier, Oxford, United Kingdom, 2004.
5. T. Watanabe: Res Mech., 1984, vol. 11, pp. 47–84.
6. C. Cheung, U. Erb, and G. Palumbo: Mater. Sci. Eng. A, 1994, vol. 185, pp. 39–43.10.1016/0921-5093(94)90925-3 ↗
7. E.M. Lehockey, G. Palumbo, and P. Lin: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 3069–79.10.1007/s11661-998-0214-y ↗
8. Y. Gao, R.O. Ritchie, M. Kumar, and R.K. Nalla: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3325–33.10.1007/s11661-005-0007-5 ↗
9. M. Detrois, J. Rotella, R.L. Goetz, R.C. Helmink, and S. Tin: Mater. Sci. Eng. A, 2015, vol. 627, pp. 95–105.10.1016/j.msea.2014.12.112 ↗
10. G. Palumbo and K.T. Aust: Materials Interfaces, Chapman and Hall, London, 1992, p. 190.
11. G. Hasson, J.Y. Boos, I. Herbeuval, M. Biscondi, and C. Goux: Surf. Sci., 1972, vol. 31, pp. 115–37.10.1016/0039-6028(72)90256-7 ↗
12. V. Randle: Acta Mater., 2004, vol. 52, pp. 4067–81.10.1016/j.actamat.2004.05.031 ↗
13. V. Randle: Mater. Sci. Technol., 2010, vol. 26, pp. 253–61.10.1179/026708309X12601952777747 ↗
14. D.G. Brandon: Acta Metall., 1966, vol. 14, pp. 1479–84.10.1016/0001-6160(66)90168-4 ↗
15. L.C. Lim and R. Raj: Acta Metall., 1984, vol. 32, pp. 1183–90.10.1016/0001-6160(84)90125-1 ↗
16. H. Lin and D.P. Pope: Acta Metall. Mater., 1993, vol. 41, pp. 553–62.10.1016/0956-7151(93)90085-7 ↗
17. V.Y. Gertsman and S.M. Bruemmer: Acta Mater., 2001, vol. 49, pp. 1589–98.10.1016/S1359-6454(01)00064-7 ↗
18. S.R. Ortner and V. Randle: Scripta Metall., 1989, vol. 23, pp. 1903–08.10.1016/0036-9748(89)90480-8 ↗
19. R. Joham, N.K. Sharma, K. Mondal, and S. Shekhar: J. Mater. Process. Technol., 2017, vol. 240, pp. 324–31.10.1016/j.jmatprotec.2016.10.014 ↗
20. N.K. Sharma and S. Shekhar: Philos. Mag., 2017, vol. 97, pp. 2004–17.10.1080/14786435.2017.1322730 ↗
21. M. Winning, A.D. Rollett, G. Gottstein, D.J. Srolovitz, A. Lim, and L.S. Shvindlerman: Philos. Mag., 2010, vol. 90, pp. 3107–28.10.1080/14786435.2010.481272 ↗
22. M. Kumar, W.E. King, and A.J. Schwartz: Acta Mater., 2000, vol. 48, pp. 2081–91.10.1016/S1359-6454(00)00045-8 ↗
23. C.A. Schuh, M. Kumar, and W.E. King: Acta Mater., 2003, vol. 51, pp. 687–700.10.1016/S1359-6454(02)00447-0 ↗
24. V.Y. Gertsman and K. Tangri: Acta Metall. Mater., 1995, vol. 43, pp. 2317–24.10.1016/0956-7151(94)00422-6 ↗
25. V.Y. Gertsman, M. Janecek, and K. Tangri: Acta Mater., 1996, vol. 44, pp. 2869–82.10.1016/1359-6454(95)00396-7 ↗
26. K. Mo, G. Lovicu, H.-M. Tung, X. Chen, Y. Miao, J.B. Hansen, and J.F. Stubbins: J. Nucl. Mater., 2013, vol. 443, pp. 366–77.10.1016/j.jnucmat.2013.07.061 ↗
27. V. Randle and A. Brown: Philos. Mag. A, 1989, vol. 59, pp. 1075–89.10.1080/01418618908209838 ↗
28. W.E. King and A.J. Schwartz: Scripta Mater., 1998, vol. 38, pp. 449–55.10.1016/S1359-6462(97)00486-7 ↗
29. G.S. Was, V. Thaveeprungsriporn, and D.C. Crawford: JOM, 1998, vol. 50, pp. 44–49.10.1007/s11837-998-0249-y ↗
30. A. Vaid, K. Mittal, S. Sahu, and S. Shekhar: Trans. Indian Inst. Met., 2016, vol. 69, pp. 1745–53.10.1007/s12666-016-0834-7 ↗
31. P. Lin, G. Palumbo, U. Erb, and K.T. Aust: Scripta Metall. Mater., 1995, vol. 33, pp. 1387–92.10.1016/0956-716X(95)00420-Z ↗
32. M. Shimada, H. Kokawa, Z.J. Wang, Y.S. Sato, and I. Karibe: Acta Mater., 2002, vol. 50, pp. 2331–41.10.1016/S1359-6454(02)00064-2 ↗
33. V. Randle and R. Jones: Mater. Sci. Eng. A, 2009, vol. 524, pp. 134–42.10.1016/j.msea.2009.06.018 ↗
34. W. Qiong, S. Da-le, L. Chang-sheng, and L. Chun-guang: Eng. Fail. Anal., 2008, vol. 15, pp. 401–10.10.1016/j.engfailanal.2007.01.009 ↗
35. D.C. Crawford and G.S. Was: Metall. Trans. A, 1992, vol. 23A, pp. 1195–1206.10.1007/BF02665051 ↗
36. C.B. Thomson and V. Randle: Scripta Mater., 1996, vol. 35, pp. 385–90.10.1016/1359-6462(96)00153-4 ↗
37. S. Kumar, B.S. Prasad, V. Kain, and J. Reddy: Corros. Sci., 2013, vol. 70, pp. 55–61.10.1016/j.corsci.2012.12.021 ↗
38. J.R. Crum: Corrosion, vol. 13, ASM Handbook, ASM, Materials Park, OH, 1992.
39. W.Z. Friend: Corrosion of Nickel and Nickel-Base Alloys, John Wiley & Sons, New York, NY, 1980.
40. D.V. Rooyen: Corrosion, 1975, vol. 31, pp. 327–37.10.5006/0010-9312-31.9.327 ↗
41. L.C. Lim and R. Raj: Acta Metall., 1984, vol. 32, pp. 1177–81.10.1016/0001-6160(84)90124-X ↗
42. V. Randle: Mater. Sci. Technol., 1991, vol. 7, pp. 985–90.10.1179/mst.1991.7.11.985 ↗
43. F.J. Humphreys: Scripta Mater., 2004, vol. 51, pp. 771–76.10.1016/j.scriptamat.2004.05.016 ↗
44. M.C. Demirel, B.S. El-Dasher, B.L. Adams, and A.D. Rollett: in Electron Backscatter Diffraction in Materials Science, A.J. Schwartz, M. Kumar, and B.L. Adams, eds., Springer, Boston, MA, 2000, pp. 65–74.10.1007/978-1-4757-3205-4_6 ↗
45. H.-Y. Wu, F.-J. Zhu, S.-C. Wang, W.-R. Wang, C.-C. Wang, and C.-H. Chiu: J. Mater. Sci., 2012, vol. 47, pp. 3971–81.10.1007/s10853-012-6250-4 ↗
46. M. Caul, J. Fiedler, and V. Randle: Scripta Mater., 1996, vol. 35, pp. 831–36.10.1016/1359-6462(96)00234-5 ↗
47. D.P. Field, L.T. Bradford, M.M. Nowell, and T.M. Lillo: Acta Mater., 2007, vol. 55, pp. 4233–41.10.1016/j.actamat.2007.03.021 ↗
48. V. Gertsman: Acta Crystallogr., Sect. A, 2001, vol. 57, pp. 369–77.10.1107/S0108767301000654 ↗
49. H. Akhiani, M. Nezakat, M. Sanayei, and J. Szpunar: Mater. Sci. Eng. A, 2015, vol. 626, pp. 51–60.10.1016/j.msea.2014.12.046 ↗
50. V. Randle and G. Owen: Acta Mater., 2006, vol. 54, pp. 1777–83.10.1016/j.actamat.2005.11.046 ↗
51. A.J. Schwartz, W.E. King, and M. Kumar: Scripta Mater., 2006, vol. 54, pp. 963–68.10.1016/j.scriptamat.2005.11.052 ↗
52. D.J. Drabble, C.M. Bishop, and M.V. Kral: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 763–72.10.1007/s11661-010-0447-4 ↗
53. V. Randle, P. Davies, and B. Hulm: Philos. Mag. A, 1999, vol. 79, pp. 305–16.10.1080/01418619908210299 ↗