Effects of Growth Rates and Compositions on Dendrite Arm Spacings in Directionally Solidified Al-Zn Alloys
Source abstract
Abstract
Dendritic spacing can affect microsegregation profiles and also the formation of secondary phases within interdendritic regions, which influences the mechanical properties of cast structures. To understand dendritic spacings, it is important to understand the effects of growth rate and composition on primary dendrite arm spacing (λ 1) and secondary dendrite arm spacing (λ 2). In this study, aluminum alloys with concentrations of (1, 3, and 5 wt pct) Zn were directionally solidified upwards using a Bridgman-type directional solidification apparatus under a constant temperature gradient (10.3 K/mm), resulting in a wide range of growth rates (8.3–165.0 μm/s). Microstructural parameters, λ 1 and λ 2 were measured and expressed as functions of growth rate and composition using a linear regression analysis method. The values of λ 1 and λ 2 decreased with increasing growth rates. However, the values of λ 1 increased with increasing concentration of Zn in the Al-Zn alloy, but the values of λ 2 decreased systematically with an increased Zn concentration. In addition, a transition from a cellular to a dendritic structure was observed at a relatively low growth rate (16.5 μm/s) in this study of binary alloys. The experimental results were compared with predictive theoretical models as well as experimental works for dendritic spacing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. Y.H. Zhu: Metall. Mater. Trans. A, 2004, vol. 45, pp.3083–3097.
2. S. Popovié and B.Grzetz: Croat. Chem. Acta, 1999, vol. 72, pp.621– 643.
3. M. Hansen, (Ed.): Constitution of Binary Alloys, Mcgraw-Hill, London, 1958.
4. F. Gonzales and M. Rappaz: Metall. Mater. Trans. A, 2006, vol. 37, pp.2797–2806.10.1007/BF02586112 ↗
5. F. Gonzales and M. Rappaz: Metall. Mater. Trans. A, 2008, vol. 39, pp.2148–2160.10.1007/s11661-008-9546-x ↗
6. M. Rheme, F. Gonzales, and M. Rappaz: Scripta Mater., 2008, vol. 59, pp.440–443.10.1016/j.scriptamat.2008.04.017 ↗
7. H. Xu, L. D. Xu, and Q. Han: Scripta Mater., 2006, vol. 54, pp.2191–2196.10.1016/j.scriptamat.2006.02.035 ↗
8. K. Osamura, H. Okuda, and S. Ochicu: Scripta Metall., 1985, vol. 19, pp.1379–1384.10.1016/0036-9748(85)90071-7 ↗
9. W. R. Osorio, J. E. Spinelli, N. Cheung, and A. Garcia: Mater. Sci. Eng. A, 2006, vol. 420, pp.179–186.10.1016/j.msea.2006.01.058 ↗
10. W. Cubberly and R. Bakerjian: Tool and Manufacturing Engineers Handbook, Desk Edition, Society of Manufacturing Engineers, Dearborn, Michigan, 1989.
11. H. S. Park, T. Kimura, T. Murakami, Y. Nagano, K. Nakata, and M. Ushio: Mater. Sci. Eng. A, 2004, vol. 371, pp.160–169.10.1016/j.msea.2003.11.030 ↗
12. O.V. Flores, C. Kennedy, L.E. Murr, D. Brown, S. Pappu, B.M. Nowak, and J.C. McClure: Scripta Mater., 1998, vol. 38, pp.703–708.10.1016/S1359-6462(97)00551-4 ↗
13. H. Akhyar and Husaini: Int. J. Metalcasting, 2016, vol. 10, pp. 452–56.10.1007/s40962-016-0024-8 ↗
14. M.E. Glicksman and M.B. Koss: Phys. Rev. Lett., 1994, vol. 73, pp.573–576.10.1103/PhysRevLett.73.573 ↗
15. E. Üstün, E. Çadırlı, H. Kaya (2006) J. Phys. Condens. Matter 18, 7825–7839.10.1088/0953-8984/18/32/026 ↗
16. G.L. Ding, W. Huang, X. Lin, and Y. Zhou: J. Cryst. Growth, 1977, vol. 177, pp.281–288.10.1016/S0022-0248(96)01081-0 ↗
17. L. Makkonen: J. Cryst. Growth, 2000, vol. 208, pp.772–778.10.1016/S0022-0248(99)00471-6 ↗
18. E. Çadırlı, İ. Karaca, H. Kaya, and N. Maraşlı: J. Cryst. Growth, 2003, vol. 255, pp.190–203.10.1016/S0022-0248(03)01214-4 ↗
19. J.E. Spinelli, I.L. Ferreira, and A. Garcia: J. Alloys and Compd., 2004, vol. 384, pp.217–226.10.1016/j.jallcom.2004.04.098 ↗
20. M.D. Peres, C.A. Siqueira, and A. Garcia: J. Alloys and Compd., 2004, vol. 381, pp.168–181.10.1016/j.jallcom.2004.03.107 ↗
21. J.D. Hunt: Solidification and Casting of Metals, The Metal Society, London, 1979.
22. R. Trivedi: Metall. Trans. A, 1984, vol. 15, pp. 977–982.10.1007/BF02644689 ↗
23. W. Kurz and D.J. Fisher: Acta Metall., 1981, vol. 29, pp. 11–20.10.1016/0001-6160(81)90082-1 ↗
24. S.Z. Lu and J.D. Hunt: Metall. Mater. Trans. A, 1996, vol. 27, pp.611–623.
25. D. Bouchard and J.S. Kirkaldy: Metall. Mater. Trans. B, 1996, vol. 27, pp.101–113.10.1007/BF02915081 ↗
26. D. Bouchard and J.S. Kirkaldy: Metall. Mater. Trans. B, 1997, vol. 28, pp.651–663.10.1007/s11663-997-0039-x ↗
27. T. Okamoto and K. Kishitake: J. Cryst. Growth, 1975, vol. 29, pp. 137–146.10.1016/0022-0248(75)90217-1 ↗
28. C.T. Rios and R. Caram: J. Cryst. Growth, 1997, vol. 174, pp.65–69.10.1016/S0022-0248(96)01061-5 ↗
29. J.S. Langer and H. Müller-Krumbhaar: Acta Metall., 1978, vol. 26, pp.1681–1687.10.1016/0001-6160(78)90078-0 ↗
30. R. Trivedi and K. Somboonsuk: Mater. Sci. Eng., 1984, vol. 65, pp.65–74.10.1016/0025-5416(84)90200-3 ↗
31. H. Löffler(Ed.): Structure and Structure Development of Al-Zn Alloys, Akademia Verlag, Berlin, 1995.
32. J.M. Drezet, B. Mireux, G. Kurtuldu, O. Magdysyuk, and M. Drakopoulos: Mater. Trans. A, 2015, vol. 46, pp.4183–4190.10.1007/s11661-015-3041-y ↗
33. N.Q. Chinh, P. Jenei, J. Gubicza, E.V. Bobruk, R. Z. Valiev, and T.G. Langdon: Mater. Lett., 2017, vol. 186, pp.334–337.10.1016/j.matlet.2016.09.114 ↗
34. C.G. Anderson, R.E. Andrews, B.G.I. Dance, M.J. Russel, E.J. Olden, and R.M. Sanderson: Proceedings of the Second International Symposium on Friction Stir Welding, Gothenburg, Sweden, 2000.
35. K.S. Bang, W.B. Lee, Y.M. Yeon, and S.B. Jung: International Welding/Joining Conference, Gyeongju, Korea, 2002.
36. P. Ravindranathan and K.C. Patil: J. Mater. Sci., 1987, vol. 22, pp.3261–3264.10.1007/BF01161190 ↗
37. F.Y. Hung, T.S.Lui, L. H. Chen, and J.G. You: J. Mater. Sci., 2007, vol. 42, pp.3865–3873.10.1007/s10853-006-0463-3 ↗
38. S. Ganesan, C.L. Chan, and D.R. Poirier: Mater. Sci. Eng. A, 1992, vol. 151, pp.97–105.10.1016/0921-5093(92)90186-5 ↗
39. M.S. Bhat, D.R. Poirier, and J.C. Heinrich: Metall. Mater. Trans. B, 1995, vol. 26, pp.1049–1056.10.1007/BF02654107 ↗
40. A. Berkdemir and M. Gündüz: App. Phys. A, 2009, vol. 96, pp.873–886.10.1007/s00339-009-5140-3 ↗
41. W.R. Osorio and A. Garcia: Mater. Sci. Eng. A, 2002, vol. 325, pp.103–111.10.1016/S0921-5093(01)01455-1 ↗
42. H. Kaya, E. Çadırlı, and M. Gündüz: J. Mater. Eng. Perf., 2007, vol. 16, pp.12–21.10.1007/s11665-006-9002-2 ↗
43. A. Ourdjini, J. Liu, and R. Elliott: Mat. Sci. Tech., 1994, vol. 10, pp.312–318.10.1179/mst.1994.10.4.312 ↗
44. H. Löffler: Structure and Structure Development in Al-Zn Alloys, Akademie Verlag, Berlin, 1995.
45. L. F. Mondolfo: Aluminium Alloys: Structure and Properties, Butterworths & Co. Ltd., London, 1976.
46. Z. Chen, Y. Mo, and Z. Nie: Metall. Mater. Trans. A, 2013, vol. 44, pp.3910–3920.10.1007/s11661-013-1731-x ↗
47. R. Trivedi and W. Kurz: Metall. Mater. Trans. A, 1990, vol. 21, pp.1311–1318.10.1007/BF02698258 ↗
48. R. Trivedi and W. Kurz: Acta Metall., 1994, vol. 42, pp. 15–23.10.1016/0956-7151(94)90044-2 ↗
49. R. Trivedi and W. Kurz: Int. Mater. Rev., 1994, vol. 39, pp. 49–74.10.1179/imr.1994.39.2.49 ↗
50. S.A. David and J.M. Vitek: Int. Mater. Rev., 1989, vol. 34, pp. 213–245.10.1179/imr.1989.34.1.213 ↗
51. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Third Edition, Trans Tech Publications, Switzerland, 1989.
52. S.N. Tewari and V. Laxmanan: Metall. Mater. Trans. A, 1987, vol. 18, pp.167–170.10.1007/BF02646238 ↗
53. M. Georgelin and A. Pocheau: Phys. Rev. E, 1998, vol. 57, pp.3189–3203.10.1103/PhysRevE.57.3189 ↗
54. S. Liu, G. Yang, L. Xiao, S. Luo, and W. Jie: JOM, 2016, vol. 68, pp. 3214–3223.10.1007/s11837-016-1965-3 ↗
55. K. Wang, S. Lu, G. Mi, C. Li, and H. Fu: China Foundry, 2010, vol. 7, pp.47–51.
56. A.L.R. Ledesma, R.A.R. Diaz, J.C. Carvayar, O.A. Fregoso, and J.A.J. Islas: Trans. Nonferrous Met. Soc. China, 2015, vol. 25, pp. 1391−1398.10.1016/S1003-6326(15)63738-4 ↗
57. R. Trivedi, Y. Shen, and S. Liu: Metall. Mater. Trans. A, 2003, vol. 34, pp.395–401.10.1007/s11661-003-0340-5 ↗
58. J. Fan, X. Li, Y. Su, R. Chen, J. Guo, and H. Fu: App. Phys. A, 2011, vol. 105, pp.239–248.10.1007/s00339-011-6497-7 ↗
59. J. Lapin, L. Ondrus, and M. Nazmy: Intermetallics, 2002, vol. 10, pp.1019–1031.10.1016/S0966-9795(02)00119-X ↗
60. J. Lapin and Z. Gabalcova: Intermetallics, 2011, vol. 19, pp.797–804.10.1016/j.intermet.2010.11.021 ↗
61. J. Feng, W.D. Huang, X. Lin, Q.Y. Pan, T. Li, and Y.H. Zhou: J. Cryst. Growth, 1999, vol. 197, pp.393–395.10.1016/S0022-0248(98)00916-6 ↗
62. H.Y. Liu and H. Jones: J. Mater. Sci. Lett., 1992, vol. 11, pp.769–770.10.1007/BF00729487 ↗
63. H. Tunca and R.W. Smith: J. Mater. Sci., 1988, vol. 23, pp.111–120.10.1007/BF01174041 ↗
64. JE Simpson, SV Garimella, HC Groh, R Abbaschian (2001) J Heat Trans 123:990–998.10.1115/1.1389058 ↗
65. H. Ochoa, O. Fornaro, O. Bustos and B. Schulz: Int. J. Cast Met. Res., 2012, vol. 25, pp.201–206.10.1179/1743133612Y.0000000010 ↗
66. P.K. Rohatgi and C.M. Adams: Trans. Met. Soc. AIME, 1967, vol. 239, pp.1729–1736.
67. P.C. Dann, J.A. Eady, and L.M. Hogan: J. Austr. Inst. Met., 1974, vol. 19, pp. 140–147.
68. J.A.E. Bell and W.C. Winegard: J.Inst. Met., 1963, vol. 92, pp.357–359.
69. C.M. Claren, J.D. Verhoeven, and R. Trivedi: Metall. Trans. A, 1980, vol. 11, pp. 1853–1861.10.1007/BF02655101 ↗
70. B.C. Fuh: Ph.D. Thesis, Iowa, IA, 1984.
71. J.T. Mason, J.D. Verhoeven, and R. Trivedi: J. Cryst. Growth, 1982, vol. 59, pp. 516–524.10.1016/0022-0248(82)90372-4 ↗
72. J.A. Juarez Islas, H. Jones, and W. Kurz: Mater. Sci. Eng., 1988, vol. 98, pp. 201–208.10.1016/0025-5416(88)90155-3 ↗
73. T. Sivarupan, C.H. Caceres, and J.A. Taylor: Metall. Mater. Trans. A, 2013, vol. 44, pp.4071–4080.10.1007/s11661-013-1768-x ↗
74. K. P. Young and D. H. Kirkwood: Metall. Trans. A, 1975, vol. 6, pp 197–205.10.1007/BF02673688 ↗
75. M. El-Bealy and B.G. Thomas: Metall. Mater. Trans. B, 1996, vol. 27, pp.689–693.10.1007/BF02915668 ↗
76. M. Kudoh and B. Wo: Steel Res. Int., 2003, vol. 74, pp 161–167.10.1002/srin.200300176 ↗
77. M. Paliwal and I.H. Jung: J. Cryst. Growth, 2014, vol. 394, pp.28–3810.1016/j.jcrysgro.2014.02.010 ↗
78. M.C. Flemings, T.Z. Kattamis, and B.P. Bardes: AFS Trans., 1991, vol. 99, pp. 501–506.