On the Stability of Reversely Formed Austenite and Related Mechanism of Transformation in an Fe-Ni-Mn Martensitic Steel Aided by Electron Backscattering Diffraction and Atom Probe Tomography
Source abstract
Abstract
The stability of reversely formed austenite and related mechanism of transformation were investigated against temperature and time in an Fe-9.6Ni-7.1Mn (at. pct) martensitic steel during intercritical annealing at a dual-phase (α + γ) region. Dilatometry, electron backscattering diffraction (EBSD), atom probe tomography (APT), and X-ray diffraction (XRD) were used to characterize the mechanism of reverse transformation. It was found that under intercritical annealing at 853 K (580 °C), when the heating rate is 20 K/s (20 °C/s), reverse transformation takes place through a mixed diffusion control mechanism, i.e., controlled by bulk diffusion and diffusion along the interface, where Ni controls the diffusion as its diffusivity is lower than that of Mn in the martensite and austenite. Increasing the intercritical annealing to 873 K (600 °C) at an identical heating rate of 20 K/s (20 °C/s) showed that reverse transformation occurs through a sequential combination of both martensitic and diffusional mechanisms. The transition temperature from diffusional to martensitic transformation was obtained close to 858 K (585 °C). Experimental results revealed that the austenite formed by the diffusional mechanism at 853 K (580 °C) mainly remains untransformed after cooling to ambient temperature due to the enrichment with Ni and Mn. It was also found that the stability of the reversely formed austenite by martensitic mechanism at 873 K (600 °C) is related to grain refinement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. S. Lee, S.J. Lee, and B.C. De Cooman: Acta Mater., 2011, vol. 59, pp. 7546–53.10.1016/j.actamat.2011.08.030 ↗
2. S. Lee, S.J. Lee, S.S. Kumar, K. Lee, and B.C. De Cooman: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3638–51.10.1007/s11661-011-0636-9 ↗
3. D.W. Suh, S.J. Park, T.H. Lee, C.S. Oh, and S.J. Kim: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 397–408.10.1007/s11661-009-0124-7 ↗
4. V.V. Sagaradze and I.G. Kabanova: Mater. Sci. Eng. A, 1999, vols. 273–275, pp. 457–61.10.1016/S0921-5093(99)00327-5 ↗
5. Y. Iwabuchi: J. Iron Steel Inst. Jpn., 1984, vol. 70, pp. 701–08.10.2355/tetsutohagane1955.70.7_701 ↗
6. T. Kobayashi, H. Tachibana, and Y. Ueda: J. Iron Steel Inst. Jpn., 1982, vol. 68, pp. 1054–62.10.2355/tetsutohagane1955.68.8_1054 ↗
7. H. Luo, J. Shi, C. Wang, W. Cao, X. Sun, and H. Dong: Acta Mater., 2011, vol. 59, pp. 4002–14.10.1016/j.actamat.2011.03.025 ↗
8. W.Q. Cao, C. Wang, J. Shi, M.Q. Wang, W.J. Hui, and H. Dong: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6661–66.10.1016/j.msea.2011.05.039 ↗
9. Y. Iwabuchi, I. Kobayashi, M. Ohmori, and M. Kikuchi: J. Jpn. Inst. Met., 1994, vol. 58, pp. 411–17.10.2320/jinstmet1952.58.4_411 ↗
10. R. Kapoor, L. Kumar, and I.S. Batra: Mater. Sci. Eng. A, 2003, vol. 352, pp. 318–24.10.1016/S0921-5093(02)00934-6 ↗
11. Han J, Lee YK (2014) Acta Mater 67:354–6110.1016/j.actamat.2013.12.038 ↗
12. C.A. Apple and G. Krauss: Acta Metall., 1972, vol. 20, pp. 849–56.10.1016/0001-6160(72)90077-6 ↗
13. S.J. Lee, Y. Park, and Y.K. Lee: Mater. Sci. Eng. A, 2009, vol. 515, pp. 32–37.10.1016/j.msea.2009.02.010 ↗
14. J. Jelenkowski: J. Mater. Process. Technol., 1997, vol. 64, pp. 207–14.10.1016/S0924-0136(96)02569-1 ↗
15. Y.K. Lee, H.C. Shin, D.S. Leem, J.Y. Choi, W. Jin, and C.S. Choi: Mater. Sci. Technol., 2003, vol. 19, pp. 393–98.10.1179/026708303225009742 ↗
16. J. Singh and C.M. Wayman: Mater. Sci. Eng., 1987, vol. 93, pp. 227–33.10.1016/0025-5416(87)90428-9 ↗
17. M. Hillert: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 351–52.10.1007/s11661-004-0136-2 ↗
18. T.B. Massalski: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2277–83.10.1007/s11661-002-0351-7 ↗
19. Zeldovich VI (2008) Met Sci Heat Treatment 50:442–4810.1007/s11041-009-9082-3 ↗
20. N. Nakada, T. Suchiyama, S. Takada, and S. Hashizume: ISIJ Int., 2007, vol. 47, pp. 1527–32.10.2355/isijinternational.47.1527 ↗
21. S.S. D’Yachenko and G.V. Fedorov: Fiz. Met. Metalloved., 1964, vol. 18, pp. 73–77.
22. S. Matsuda and Y. Okamura: Tetsu-to-Hagané, 1974, vol. 60, pp. 226–38.10.2355/tetsutohagane1955.60.2_226 ↗
23. H.I. Aaronson: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2285–97.10.1007/s11661-002-0352-6 ↗
24. H.R. Koohdar, M. Nili Ahmadabadi, M. Habibi-Parsa, and H.R. Jafarian: Mater. Sci. Eng. A, 2015, vol. 621, pp. 52–60.10.1016/j.msea.2014.10.049 ↗
25. H.R. Koohdar, M. Nili Ahmadabadi, M. Habibi-Parsa, H.R. Jafarian, H. Ghasemi-Nanesa, and H. Shirazi: Mater. Sci. Eng. A, 2016, vol. 658, pp. 86–90.10.1016/j.msea.2016.01.113 ↗
26. H. Ghasemi-Nanesa, M. Nili-Ahmadabadi, H.R. Koohdar, M. Habibi-Parsa, S. Hossein Nedjad, S.A. Alidokht, and T.G. Langdon: Philos. Mag., 2014, vol. 94, pp. 1493–1507.10.1080/14786435.2014.886785 ↗
27. Hossein Nedjad S, Nili Ahmadabadi M, Furuhara T, Maki T (2006) Phys Stat Sol A 203: 2229–3510.1002/pssa.200566023 ↗
28. Hossein Nedjad S, Nili Ahmadabadi M, Furuhara T (2008) Metall Mater Trans A 39A: 19–2710.1007/s11661-007-9407-z ↗
29. Hossein Nedjad S, Nili Ahmadabadi M, Furuhara T (2008) Mater Sci EngA 490: 105–1210.1016/j.msea.2008.01.070 ↗
30. M. Yodogawa: Trans. JIM, 1976, vol. 17, pp. 799–808.10.2320/matertrans1960.17.799 ↗
31. H. Shirazi, G. Miyamoto, S. Hossein Nedjad, H. Ghasemi-Nanesa, M. Nili Ahmadabadi, and T. Furuhara: J. Alloys Compd., 2013, vol. 577, pp. S572–S577.10.1016/j.jallcom.2012.02.015 ↗
32. S. Zaefferer, J. Ohlert, and W. Bleck: Acta Mater., 2004, vol. 52, pp. 2765–78.10.1016/j.actamat.2004.02.044 ↗
33. B.D. Cullity and S.R. Stock: Elements of X-ray Diffraction, 3rd ed., Prentice Hall, Upper Saddle River, NJ, 2001.
34. A.K. De, D.C. Murdock, M.C. Mataya, J.G. Speer, and D.K. Matlock: Scripta Mater., 2004, vol. 50, pp. 1445–49.10.1016/j.scriptamat.2004.03.011 ↗
35. C.G. Mateo, F.G. Caballero, C. Capdevila, and C.G.D. Andres: Scripta Mater., 2009, vol. 61, pp. 855–58.10.1016/j.scriptamat.2009.07.013 ↗
36. K. Thompson, D. Lawrence, D.J. Larson, J.D. Olson, T.F. Kelly, and B. Gorman: Ultramicroscopy, 2007, vol. 107, pp. 131–39.
37. D. Larson, P. Clifton, R. Alvis, D. Olson, J. Weng, S. Gerstl, and F. Chen: Microsc. Microanal., 2008, vol. 14, pp. 1018–19.10.1017/S1431927608083220 ↗
38. T. Maki and I. Tamura: Trans. ISIJ, 1981, vol. 67, pp. 852–66.
39. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99.10.1016/S1359-6454(02)00577-3 ↗
40. H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279–88.10.1016/j.actamat.2005.11.001 ↗
41. I. Shakhova, V. Dudko, A. Belyakov, K. Tsuzaki, and R. Kaibyshev: Mater. Sci. Eng. A, 2012, vol. 545, pp. 176–86.10.1016/j.msea.2012.02.101 ↗
42. L. Delaey: in Materials Science and Technology, R.W. Cahn, P. Hassen, and E.J. Kramer, eds., VCH Publishers, New York, NY, 1991, vol. 5, pp. 341–401.
43. F. Moszner, E. Povoden-Karadeniz, S. Pogatscher, P.J. Uggowitzer, Y. Estrin, S.S.A. Gerstl, E. Kozeschnik, and J.F. Loffler: Acta Mater., 2014, vol. 72, pp. 99–109.10.1016/j.actamat.2014.03.032 ↗
44. R. Kapoor and I.S. Batra: Mater. Sci. Eng. A, 2004, vol. 371, pp. 324–34.10.1016/j.msea.2003.12.023 ↗
45. J.K. Lee and H.I. Aaronson: Acta Metall., 1975, vol. 23, pp. 809–20.10.1016/0001-6160(75)90197-2 ↗
46. S. Takeuchi, T. Honma, and S. Suzuki: J. Jpn. Inst. Met., 1957, vol. 21, pp. 51–57.10.2320/jinstmet1952.21.1_51 ↗
47. K. Wakasa and C.M. Wayman: Acta Metall., 1981, vol. 29, pp. 973–90.10.1016/0001-6160(81)90051-1 ↗
48. G. Krauss: Acta Metall., 1963, vol. 11, pp. 499–509.10.1016/0001-6160(63)90085-3 ↗
49. H. Kessler and W. Pitsch: Acta Metall., 1967, vol. 15, pp. 401–05.10.1016/0001-6160(67)90224-6 ↗
50. C. Celada-Casero, B.M. Huang, M.M. Aranda, J.R. Yang, and D. San Martin: Mater. Charact., 2016, vol. 118, pp. 129–41.10.1016/j.matchar.2016.05.014 ↗
51. L. Kaufman and M. Cohen: Trans. AIME, 1956, vol. 206, pp. 1393–1400.
52. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, 2nd ed., Chapman & Hall, London, 1992.10.1007/978-1-4899-3051-4 ↗
53. A.F. Padilha, R.L. Plaut, and P.R. Rios: ISIJ Int., 2003, vol. 43, pp. 135–43.10.2355/isijinternational.43.135 ↗
54. K.H. Lo, C.H. Shek, and J.K.L. Lai: Mater. Sci. Eng. R, 2009, vol. 65, pp. 39–104.10.1016/j.mser.2009.03.001 ↗
55. A. Jarvenpaa, M. Jaskari, J. Man, and L.P. Karjalainen: Mater. Charact., 2017, vol. 127, pp. 12–26.10.1016/j.matchar.2017.01.040 ↗
56. M. Tanaka, T. Suzuki, and M. Yodogawa: Nip. Kinz. Gak., 1967, vol. 31, pp. 1075–81.
57. K. Tomimura, S. Takaki, and Y. Tokunaga: ISIJ Int., 1991, vol. 31, pp. 1431–37.10.2355/isijinternational.31.1431 ↗
58. T. Tsuchiyama, Y. Miyamoto, and S. Takaki: ISIJ Int., 2001, vol. 41, pp. 1047–52.10.2355/isijinternational.41.1047 ↗
59. A. Belyakov, T. Sakai, H. Miura, R. Kaibyshev, and K. Tsuzaki: Acta Mater., 2002, vol. 50, pp. 1547–57.10.1016/S1359-6454(02)00013-7 ↗
60. H.S. Yang and H.K.D.H. Bhadeshia: Scripta Mater., 2009, vol. 60, pp. 493–95.10.1016/j.scriptamat.2008.11.043 ↗
61. S.J. Lee and Y.K. Lee: Mater. Sci. Forum, 2005, vol. 475, pp. 3169–72.10.4028/www.scientific.net/MSF.475-479.3169 ↗
62. A. Kisko, R.D.K. Misra, J. Talonen, and L.P. Karjalainen: Mater. Sci. Eng. A, 2013, vol. 578, pp. 408–16.10.1016/j.msea.2013.04.107 ↗
63. M.M. Wang, C.C. Tasan, D. Ponge, A. Kostka, and D. Raabe: Acta Mater., 2014, vol. 79, pp. 268–81.10.1016/j.actamat.2014.07.020 ↗