journal article·2017-10

Experimental and Theoretical Studies of the Hot Tearing Behavior of Al-xZn-2Mg-2Cu Alloys

Y. Li, X. Gao, Z. R. Zhang, W. L. Xiao, H. X. Li, Q. Du, L. Katgerman, J. S. Zhang, L. Z. Zhuang

Publisher page

Abstract

The effect of Zn addition on the hot tearing susceptibilities of non-refined Al-xZn-2Mg-2Cu (x = 2-12 wt pct) alloys was investigated via direct crack observations and load response measurements. The obtained experimental results were compared with the predictions made using a modified Rappaz–Drezet–Gremaud (RDG) hot tearing model. Both the minimum crack width and load at the non-equilibrium solidus (NES) temperature (which served as a good indicator of hot tearing response) were observed at a Zn concentration of approximately 4 wt pct, and the formation of cracks was highly correlated with the predictions made via the modified RDG hot tearing model (although the obtained relationship critically depended on the magnitude of fraction solid at which solid coalescence was expected to occur). Furthermore, it was confirmed from the load development pattern that the addition of Zn into the matrix of Al-xZn-2Mg-2Cu alloys promoted the formation of coalesced networks, which decreased their corresponding coalescence fraction solids.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. F. D’Elia, C. Ravindran, D. Sediako, K. U. Kainer and N. Hort, Mater. Des., 2014, vol. 64, pp. 44-55.10.1016/j.matdes.2014.07.024 ↗
2. J. Campbell: Castings, Butterworth-Heinemann, Oxford, 1991.
3. Q. L. Bai, J. C. Liu, H. X. Li, Q. Du, L. Katgerman, J. S. Zhang and L. Z. Zhuang, Mater. Sci. Tech., 2016, vol. 32, pp. 846-854.10.1080/02670836.2015.1104081 ↗
4. L. Aucott, D. Huang, H.B. Dong, S.W. Wen, J.A. Marsden, A. Rack, A.C.F. Cocks, Sci. Rep., 2017, vol. 7, 40255.10.1038/srep40255 ↗
5. 5. Suyitno, W. Kool, L. Katgerman, Metall. Mater. Trans. A, 2009, vol. 40, pp. 2388-2400.10.1007/s11661-009-9941-y ↗
6. 6. Suyitno, V.I. Savran, L. Katgerman, D.G. Eskin, Metall. Mater. Trans. A, 2004, vol. 35, pp. 3551-3561.10.1007/s11661-004-0192-7 ↗
7. D. G. Eskin, Suyitno and L. Katgerman, Prog. Mater. Sci., 2004, vol. 49, pp. 629-711.10.1016/S0079-6425(03)00037-9 ↗
8. M.A. Easton, H. Wang, J. Grandfield, C.J. Davidson, D.H. StJohn, L.D. Sweet, and M.J. Couper, Metall. Mater. Trans. A, 2012, vol. 43, pp. 3227-3238.10.1007/s11661-012-1132-6 ↗
9. W. X. Shu, L. G. Hou, J. C. Liu, C. Zhang, F. Zhang, J. T. Liu, L. Z. Zhuang and J. S. Zhang, Metall. Mater. Trans. A, 2015, vol. 46, pp. 5375-5392.10.1007/s11661-015-3050-x ↗
10. Q. L. Bai, Y. Li, H. X. Li, Q. Du, J. S. Zhang and L. Z. Zhuang, Metall. Mater. Trans. A, 2016, vol 47, pp. 4080-4091.10.1007/s11661-016-3588-2 ↗
11. 11. Y. Li, Q. L. Bai, J. C. Liu, H. X. Li, Q. Du, J. S. Zhang and L. Z. Zhuang, Metall. Mater. Trans. A, 2016, vol. 47, pp. 4024-4037.10.1007/s11661-016-3543-2 ↗
12. U. Feurer, Quality control of engineering alloys and the role of metals science, Delft University of Technology, Delft, The Netherlands, 1977, pp. 131-145.
13. T. W. Clyne, G. J. Davies, Proc. Conf. on Solidification and Castings of Metals, Metals Society, London, 1979, pp. 275-278.
14. L. Katgerman: JOM, 1982, vol. 34, pp. 46–49.10.1007/BF03339110 ↗
15. I.I. Novikov, Hot-Shortness of Nonferrous Metals and Alloys, Moscow, 1966.
16. 16. N.N. Prokhorov: Russ. Castings Prod., 1962, vol. 2, pp. 172-175.
17. B. Magnin, L. Katgerman, and B. Hannart: in Modeling of Casting Welding and Advanced Solidification Processes VII, M. Cross and J. Campbell, eds., TMS, Warrendale, PA, 1995, pp. 303–10.
18. M. Rappaz, J.-M. Drezet, and M. Gremaud, Metall. Mater. Trans. A, 1999, vol. 30, pp. 449-455.10.1007/s11661-999-0334-z ↗
19. 19. M. M’Hamdi, A. Mo, H.G. Fjær, Metall. Mater. Trans. A, 2006, vol. 37, pp. 3069-3083.10.1007/s11661-006-0188-6 ↗
20. M. Sistaninia, S. Terzi, A.B. Phillion, J.M. Drezet, M. Rappaz, Acta Mater., 2013, vol. 61(10), pp. 3831-3841.10.1016/j.actamat.2013.03.021 ↗
21. 21. S. Kou, Acta Mater., 2015, vol. 88, pp. 366-374.10.1016/j.actamat.2015.01.034 ↗
22. J. F. Grandfield, C. J. Davidson, and J. A. Taylor: in Light Metals, J.L. Anjier, ed., TMS, Warrendale, 2001, pp. 895–901.
23. Suyitno, W. Kool and L. Katgerman, Metall. Mater. Trans. A, 2005, vol. 36, pp. 1537-1546.10.1007/s11661-005-0245-6 ↗
24. D. G. Eskin, Suyitno, J. F. Mooney and L. Katgerman, Metall. Mater. Trans. A, 2004, vol. 35, pp. 1325-1335.10.1007/s11661-004-0307-1 ↗
25. 25. L. Zhang, D. G. Eskin, M. Lalpoor and L. Katgerman, Mater. Sci. Eng. A, 2010, vol. 527, pp. 3264-3270.10.1016/j.msea.2010.02.005 ↗
26. 26. A. Stangeland, A. Mo, M. M’Hamdi, D. Viano, and C. Davidson, Metall. Mater. Trans. A, 2006, vol. 37, pp. 705-714.10.1007/s11661-006-0042-x ↗
27. 27. T. W. Clyne and G. J. Davies, Br. Foundrym., 1981, vol. 74, pp. 65-73.
28. M Easton, H Wang, J Grandfield, D John, E Sweet (2004) Mater. Forum. 28: 224–29.
29. 29. S. Li, K. Sadayappan, D. Apelian, Metall. Mater. Trans. B, 2013, vol. 44, pp. 614-623.10.1007/s11663-013-9801-4 ↗
30. 30. J.-M. Drezet, B. Mireux, G. Kurtuldu, O. Magdysyuk, and M. Drakopoulos, Metall. Mater. Trans. A, 2015, vol. 46, pp. 4183-4190.10.1007/s11661-015-3041-y ↗
31. O. Ludwig, J.-M. Drezet, C. L. Martin, and M. Suéry, Metall. Mater. Trans. A, 2005, vol. 36, pp. 1525-1535.10.1007/s11661-005-0244-7 ↗
32. 32. J. Song, Z. Wang, Y. Huang, A. Srinivasan, F. Beckmann, K.U. Kainer, and N. Hort, Mater. Des., 2015, vol. 87, pp. 157-170.10.1016/j.matdes.2015.08.026 ↗
33. 33. Z. Wang, Y. Huang, A. Srinivasan, Z. Liu, F. Beckmann, K.U. Kainer, and N. Hort, Mater. Des., 2013, vol. 47, pp. 90-100.10.1016/j.matdes.2012.12.044 ↗
34. 34. Song, Z. Wang, Y. Huang, A. Srinivasan, F. Beckmann, K.U. Kainer, and N. Hort, Mater. Des., 2015, vol. 87, pp. 157-170.10.1016/j.matdes.2015.08.026 ↗
35. 35. M. Easton, D.H. StJohn, and L. Sweet, Mater. Sci. Forum., 2010, vol. 630, pp 213-221.10.4028/www.scientific.net/MSF.630.213 ↗
36. 36. Y. Ju and L. Arnberg, Int. J. Cast Metal Res., 2003, vol. 16, pp. 522-530.10.1080/13640461.2003.11819630 ↗
37. 37. L. Sweet, M.A. Easton, J.A. Taylor, J.F. Grandfield, C.J. Davidson, L. Lu, M.J. Couper, D.H. StJohn, Metall. Mater. Trans. A, 2013, 44, pp. 5396-5407.10.1007/s11661-012-1562-1 ↗
38. 38. E. Giraud, M. Suery and M. Coret, Metall. Mater. Trans. A, 2010, vol. 41, pp. 2257-2268.10.1007/s11661-010-0268-5 ↗
39. 39. X. Doré, H. Combeau and M. Rappaz, Acta Mater., 2000, vol. 48, pp. 3951-3962.10.1016/S1359-6454(00)00177-4 ↗
40. 40. S. Vernède, P. Jarry, and M. Rappaz, Acta Mater., 2006, vol. 54, pp. 4023-4034.10.1016/j.actamat.2006.04.035 ↗
41. 41. S. Vernède, J. A. Dantzig, and M. Rappaz, Acta Mater., 2009, vol. 57, pp. 1554-1569.10.1016/j.actamat.2008.12.006 ↗
42. 42. M. Rappaz, A. Jacot, and W. Boettinger, Metall. Mater. Trans. A, 2003, vol. 34, pp. 467-479.10.1007/s11661-003-0083-3 ↗