Study on the Strain Hardening Behaviors of TWIP/TRIP Steels
Source abstract
Abstract
Due to the complex coupling of twinning-induced plasticity (TWIP), transformation-induced plasticity (TRIP), and dislocation glide in TWIP/TRIP steels, it is difficult as well as essential to build a comprehensive strain hardening model to describe the interactions between different deformation mechanisms (i.e., deformation twinning, martensitic transformation, and dislocation glide) and the resulted strain hardening behaviors. To address this issue, a micromechanical model is established in this paper to predict the deformation process of TWIP/TRIP steels considering both TWIP and TRIP effects. In the proposed model, the generation of deformation twinning and martensitic transformation is controlled by the stacking fault energy (SFE) of the material. In the thermodynamic calculation of SFE, deformation temperature, chemical compositions, microstrain, and temperature rise during deformation are taken into account. Varied by experimental results, the developed model can predict the stress–strain response and strain hardening behaviors of TWIP/TRIP steels precisely. In addition, the improved strength and enhanced strain hardening in Fe-Mn-C TWIP/TRIP steels due to the increased carbon content is also analyzed, which consists with literature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. E. Orowan: Z. Phys. A, 1934, vol. 89, pp. 605–13.10.1007/BF01341478 ↗
2. G.I. Taylor: Proc. R. Soc. Lond. A, 1934, vol. 145, pp. 362–87.10.1098/rspa.1934.0106 ↗
3. M. Polanyi: Z. Phys. A, 1934, vol. 89, pp. 660–4.10.1007/BF01341481 ↗
4. L. Bragg and J.F. Nye: Proc. R. Soc. Lond. A, 1947, vol. 190, pp. 474–81.10.1098/rspa.1947.0089 ↗
5. R.W. Cahn: Adv. Phys., 1954, vol. 3, pp. 363–445.10.1080/00018735400101223 ↗
6. V.F. Zackay, M.D. Bhandarkar, and E.R. Parker: The Role of Deformation-Induced Phase Transformations in the Plasticity of Some Iron-Base Alloys, Springer, New York, 1974, pp. 351–404.
7. S. Allain, J.P. Chateau, O. Bouaziz, S. Migot, and N. Guelton: Mater. Sci. Eng. A, 2004, vol. 387, pp. 158–62.10.1016/j.msea.2004.01.059 ↗
8. L. Mosecker, D.T. Pierce, A. Schwedt, M. Beighmohamadi, J. Mayer, W. Bleck, and J.E. Wittig: Mater. Sci. Eng. A, 2015, vol. 642, pp. 71–83.10.1016/j.msea.2015.06.047 ↗
9. O. Grässel, L. Krüge, G. Frommeyer, and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–409.10.1016/S0749-6419(00)00015-2 ↗
10. T.S. Byun: Acta Mater., 2003, vol. 51, pp. 3063–71.10.1016/S1359-6454(03)00117-4 ↗
11. P.J. Ferreira and P. Müllner: Acta Mater., 1998, vol. 46, pp. 4479–84.10.1016/S1359-6454(98)00155-4 ↗
12. G.B. Olson and M. Cohen: Metall. Mater. Trans. A, 1976, vol. 7A, pp. 1897–904.
13. I. Karaman, H. Sehitoglu, K. Gall, Y.I. Chumlyakov, and H.J. Maier: Acta Mater., 2000, vol. 48, pp. 1345–59.10.1016/S1359-6454(99)00383-3 ↗
14. D.T. Pierce, J.A. Jiménez, J. Bentley, D. Raabe, C. Oskay, and J.E. Wittig: Acta Mater., 2014, vol. 68, pp. 238–53.10.1016/j.actamat.2014.01.001 ↗
15. G.R. Lehnhoff, K.O. Findley, B.C.D. Cooman, and G.R. Lehnhoff: Scripta Mater., 2014, vol. 92, pp. 19–22.10.1016/j.scriptamat.2014.07.019 ↗
16. B.X. Huang, X.D. Wang, and L. Wang: Metall. Mater. Trans. A, 2008, vol. 39, pp. 717–24.10.1007/s11661-007-9434-9 ↗
17. B. Jiang, X. Qi, S. Yang, W. Zhou, and T.Y. Hsu: Acta Mater., 1998, vol. 46, pp. 501–10.10.1016/S1359-6454(97)00266-8 ↗
18. T. Lee, E. Shin, C. Oh, H. Ha, and S. Kim: Acta Mater., 2010, vol. 58, pp. 3173–86.10.1016/j.actamat.2010.01.056 ↗
19. Y. Kim, Y.M. Kim, J. Koh, T. Lee, W.C. Woo, and H.N. Han: Scripta Mater., 2016, vol. 119, pp. 1–4.10.1016/j.scriptamat.2016.03.013 ↗
20. J.P. Hirth: Metall. Mater. Trans. B, 1970, vol. 1B, pp. 2367–74.10.1007/BF03038365 ↗
21. S. Curtze, V.T. Kuokkala, A. Oikari, J. Talonen, and H. Hänninen: Acta Mater., 2011, vol. 59, pp. 1068–76.10.1016/j.actamat.2010.10.037 ↗
22. S. Curtze and V.T. Kuokkala: Acta Mater., 2010, vol. 58, pp. 5129–41.10.1016/j.actamat.2010.05.049 ↗
23. H. Kim, Y. Ha, K.H. Kwon, M. Kang, N.J. Kim, and S. Lee: Acta Mater., 2015, vol. 87, pp. 332–43.10.1016/j.actamat.2014.11.027 ↗
24. I.C. Jung and B.C.D. Cooman: Acta Mater., 2013, vol. 61, pp. 6724–35.10.1016/j.actamat.2013.07.042 ↗
25. J.E. Jung, J. Park, J.S. Kim, J.B. Jeon, S.K. Kim, and Y.W. Chang: Met. Mater. Int., 2014, vol. 20, pp. 27–34.10.1007/s12540-014-1008-y ↗
26. M. Eskandari, A. Zarei-Hanzaki, and A. Marandi: Mater. Des., 2014, vol. 39, pp. 279–84.10.1016/j.matdes.2012.02.047 ↗
27. A. Khosravifard, A.S. Hamada, M.M. Moshksar, R. Ebrahimi, D.A. Porter, and L.P. Karjalainen: Mater. Sci. Eng. A, 2013, vol. 582, pp. 15–21.10.1016/j.msea.2013.06.014 ↗
28. X. Zhang, T. Sawaguchi, K. Ogawa, F. Yin, and X. Zhao: J. Alloys Compd., 2013, vol. 577, pp. 533–37.10.1016/j.jallcom.2011.12.109 ↗
29. M. Linderov, C. Segel, A. Weidner, H. Biermann, and A. Vinogradov: Mater. Sci. Eng. A, 2014, vol. 597, pp. 183–93.10.1016/j.msea.2013.12.094 ↗
30. R. Rahimi, C. Ullrich, V. Klemm, D. Rafaja, B.C.D. Cooman, H. Biermann, and J. Mola: Mater. Sci. Eng. A, 2016, vol. 649, pp. 301–12.10.1016/j.msea.2015.10.005 ↗
31. S.Y. Han, S.Y. Shin, S. Lee, N.J. Kim, J. Kwak, and K. Chin: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 138–46.10.1007/s11661-010-0456-3 ↗
32. S. Liu, L. Qian, J. Meng, P. Ma, and F. Zhang: Mater. Sci. Eng. A, 2015, vol. 639, pp. 425–30.10.1016/j.msea.2015.05.044 ↗
33. M. Ghasri-Khouzani and J.R. McDermid: Mater. Sci. Eng. A, 2015, vol. 621, pp. 118–27.10.1016/j.msea.2014.10.042 ↗
34. M. Huang, O. Bouaziz, D. Barbier, and S. Allain: J. Mater. Sci., 2011, vol. 46, pp. 7410–14.10.1007/s10853-011-5703-5 ↗
35. K. Chin, C. Kang, S.Y. Shin, S. Hong, S. Lee, H.S. Kim, K. Kim, and N.J. Kim: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2922–28.10.1016/j.msea.2010.12.085 ↗
36. J.S. Jeong, W. Woo, K.H. Oh, S.K. Kwon, and Y.M. Koo: Acta Mater., 2012, vol. 60, pp. 2290–99.10.1016/j.actamat.2011.12.043 ↗
37. J.E. Jin and Y.K. Lee: Acta Mater., 2012, vol. 60, pp. 1680–88.10.1016/j.actamat.2011.12.004 ↗
38. I. Gutierrez-Urrutia and D. Raabe: Scripta Mater., 2013, vol. 68, pp. 343–47.10.1016/j.scriptamat.2012.08.038 ↗
39. T. Dieudonné, L. Marchetti, M. Wery, J. Chêne, C. Allely, P. Cugy, and C.P. Scott: Corros. Sci., 2014, vol. 82, pp. 218–26.10.1016/j.corsci.2014.01.022 ↗
40. L.A. Dobrzański and W. Borek: Arch. Civ. Mech. Eng., 2012, vol. 12, pp. 299–304.10.1016/j.acme.2012.06.016 ↗
41. J. Lee, S.S. Sohn, S. Hong, B.S. Kim, B. Lee, N.J. Kim, and S. Lee: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5419–30.10.1007/s11661-014-2513-9 ↗
42. S. Decker, K. Lange, T. Dubberstein, and L. Krüger: Adv. Eng. Mater., 2015, vol. 17, pp. 1351–56.10.1002/adem.201400548 ↗
43. X. Peng, D. Zhu, Z. Hu, W. Yi, H. Liu, and M. Wang: Mater. Des., 2013, vol. 45, pp. 518–23.10.1016/j.matdes.2012.09.014 ↗
44. K. Jeong, J.E. Jin, Y.S. Jung, S. Kang, and Y.K. Lee: Acta Mater., 2013, vol. 61, pp. 3399–410.10.1016/j.actamat.2013.02.031 ↗
45. V. Mertinger, M. Benke, and E. Nagy: Mater. Today Proc., 2015, vol. 2, pp. 99–117.
46. B.X. Huang, X.D. Wang, Y.H. Rong, L. Wang, and L. Jin: Mater. Sci. Eng. A, 2006, vol. 438–440, pp. 306–11.10.1016/j.msea.2006.02.150 ↗
47. Y. Zhao, J. Wang, S. Zhou, and X. Wang: Mater. Sci. Eng. A, 2014, vol. 608, pp. 106–13.10.1016/j.msea.2014.04.084 ↗
48. S. Allain, J.P. Chateau, and O. Bouaziz: Mater. Sci. Eng. A, 2004, vol. 387, pp. 143–7.10.1016/j.msea.2004.01.060 ↗
49. W.J. Dan, F. Liu, and W.G. Zhang: Comput. Mater. Sci., 2014, vol. 94, pp. 114–21.10.1016/j.commatsci.2014.03.007 ↗
50. J.H. Kang, T. Ingendahl, and W. Bleck: Mater. Des., 2016, vol. 90, pp. 340–9.10.1016/j.matdes.2015.10.126 ↗
51. F. Liu, W.J. Dan, and W.G. Zhang: Mater. Des., 2015, vol. 65, pp. 737–42.10.1016/j.matdes.2014.10.008 ↗
52. R.A. Lebensohn and C.N. Tomé: Acta Metall. Mater., 1993, vol. 41, pp. 2611–24.10.1016/0956-7151(93)90130-K ↗
53. O. Engler, C.N. Tome, and M.Y. Huh: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2299–315.10.1007/s11661-000-0146-7 ↗
54. I. Karaman, H. Sehitoglu, H.J. Maier, and Y.I. Chumlyakov: Acta Mater., 2001, vol. 49, pp. 3919–33.10.1016/S1359-6454(01)00296-8 ↗
55. I. Karaman, H. Sehitoglu, Y.I. Chumlyakov, H.J. Maier, and I.V. Kireeva: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 695–706.10.1007/s11661-001-1005-x ↗
56. S. Suwas, B. Beausir, L.S. Toth, J.J. Fundenberger, and G. Gottstein: Acta Mater., 2011, vol. 59, pp. 1121–33.10.1016/j.actamat.2010.10.045 ↗
57. B. Skoczen, J. Bielski, and J. Tabin: Int. J. Plast., 2014, vol. 55, pp. 198–218.10.1016/j.ijplas.2013.09.004 ↗
58. Z. Moumni, F. Roger, and N.T. Trinh: Int. J. Plast., 2011, vol. 27, pp. 414–39.10.1016/j.ijplas.2010.07.002 ↗
59. R. Mahnken, M. Wolff, A. Schneidt, and M. Böhm: Int. J. Plast., 2012, vol. 39, pp. 1–26.10.1016/j.ijplas.2012.05.009 ↗
60. R. Zaera, J.A. Rodriguez-Martinez, and D. Rittel: Int. J. Plast., 2013, vol. 40, pp. 185–201.10.1016/j.ijplas.2012.08.003 ↗
61. S. Pruger, A. Seupel, and M. Kuna: Int. J. Plast., 2013, vol. 55, pp. 182–97.10.1016/j.ijplas.2013.10.005 ↗
62. H. Egner, B. Skoczen, and M. Ryś: Int. J. Plast., 2015, vol. 64, pp. 113–33.10.1016/j.ijplas.2014.08.005 ↗
63. A. Ma and A. Hartmaier: Int. J. Plast., 2014, vol. 64, pp. 40–55.10.1016/j.ijplas.2014.07.008 ↗
64. Y. Shen, N. Jia, R.D.K. Misra, and L. Zuo: Acta Mater., 2016, vol. 103, pp. 229–42.10.1016/j.actamat.2015.09.061 ↗
65. H. Zhan, G. Wang, D. Kent, and M. Dargusch: Acta Mater., 2016, vol. 105, pp. 104–13.10.1016/j.actamat.2015.11.056 ↗
66. B.B. He, H.W. Luo, and M.X. Huang: Int. J. Plast., 2015, vol. 78, pp. 173–86.
67. S. Martin, S. Wolf, U. Martin, L. Krüger, and D. Rafaja: Metall. Mater. Trans. A, 2014, vol. 47A, pp. 1–10.
68. C.Y. Sun, N. Guo, M.W. Fu, and S.W. Wang: Int. J. Plast., 2016, vol. 76, pp. 186–212.10.1016/j.ijplas.2015.08.003 ↗
69. L.W. Su, M. Madivala, U. Prahl, F. Roters, and D. Raabe: Acta Mater., 2016, vol. 118, pp. 140–51.10.1016/j.actamat.2016.07.032 ↗
70. S. Lee and B.C.D. Cooman: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 709–16.10.1007/s11661-013-2047-6 ↗
71. S. Lee and B.C.D. Cooman: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 6039–52.10.1007/s11661-014-2540-6 ↗
72. M.I. Latypov, S. Shin, B.C.D. Cooman, and H.S. Kim: Acta Mater., 2016, vol. 108, pp. 219–28.10.1016/j.actamat.2016.02.001 ↗
73. A. Dumay, J.-P. Chateau, S. Allain, S. Migot, and O. Bouaziz: Mater. Sci. Eng. A, 2008, vol. 483–484, pp. 184–7.10.1016/j.msea.2006.12.170 ↗
74. R.P. Reed and R.E. Schramm: J. Appl. Phys., 1974, vol. 45, pp. 4705–11.10.1063/1.1663122 ↗
75. F. Liu, W.J. Dan, and W.G. Zhang: Mater. Sci. Eng. A, 2016, vol. 674, pp. 178–85.10.1016/j.msea.2016.07.115 ↗
76. R. Kapoor and S. Nemat-Nasser: Mech. Mater., 1998, vol. 27, pp. 1–12.10.1016/S0167-6636(97)00036-7 ↗
77. L. Remy and A. Pineau: Metall. Mater. Trans. B, 1974, vol. 5B, pp. 963–5.10.1007/BF02643159 ↗
78. G.B. Olson and M. Cohen: Metall. Mater. Trans. A, 1975, vol. 6A, pp. 791–5.10.1007/BF02672301 ↗
79. F. Lecroisey and A. Pineau: Metall. Trans. B, 1972, vol. 3, pp. 391–400.10.1007/BF02642042 ↗
80. P.L. Manganon and G. Thomas: Metall. Trans. B, 1970, vol. 1, pp. 1577–86.10.1007/BF02642003 ↗
81. L. Remy: Acta Metall., 1978, vol. 26, pp. 443–5.10.1016/0001-6160(78)90170-0 ↗
82. R.J. Wasilewski: Metall. Mater. Trans. A, 1977, vol. 8A, pp. 391–6.10.1007/BF02661747 ↗
83. S. Mahajan, M.L. Green, and D. Brasen: Metall. Mater. Trans. A, 1977, vol. 8A, pp. 283–93.10.1007/BF02661642 ↗
84. R. Stringfellow, D.M. Parks, and G.B. Olson: Acta Metall. Mater., 1992, vol. 40, pp. 1703–16.10.1016/0956-7151(92)90114-T ↗
85. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865–75.10.1016/0001-6160(81)90112-7 ↗
86. J. Bouquerel, K. Verbeken, and B.C.D. Cooman: Acta Mater., 2006, vol. 54, pp. 1443–56.10.1016/j.actamat.2005.10.059 ↗
87. W.J. Dan, Z.Q. Lin, S.H. Li, and W.G. Zhang: Mater. Sci. Eng. A, 2012, vol. 552, pp. 1–8.10.1016/j.msea.2012.04.028 ↗
88. S. Allain, J.P. Chateau, and O. Bouaziz: Steel Res., 2002, vol. 73, pp. 299–302.10.1002/srin.200200212 ↗
89. J.A. Rodríguez-Martínez, R. Pesci, and A. Rusinek: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5974–82.10.1016/j.msea.2011.04.030 ↗
90. R. Zaera, J.A. Rodríguez-Martínez, A. Casado, J. Fernández-Sáez, A. Rusinek, and R. Pesci: Int. J. Plast., 2012, vol. 29, pp. 77–101.10.1016/j.ijplas.2011.08.003 ↗
91. K. Sato, M. Ichinose, Y. Hirotsu, and Y. Inoue: ISIJ Int., 2010, vol. 52, pp. 868–77.
92. A. Saeed-Akbari, J. Imlau, U. Prahl, and W. Bleck: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 3076–90.10.1007/s11661-009-0050-8 ↗
93. T.T. Huang, R.B. Gou, W.J. Dan, and W.G. Zhang: Mater. Sci. Eng. A, 2016, vol. 672, pp. 88–97.10.1016/j.msea.2016.06.066 ↗
94. T.M. Hatem and M.A. Zikry: J. Mech. Phys. Solids, 2010, vol. 58, pp. 1057–72.10.1016/j.jmps.2010.04.009 ↗
95. K. Zhang, M. Zhang, Z. Guo, N. Chen, and Y. Rong: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8486–91.10.1016/j.msea.2011.07.049 ↗
96. K. Spencer, J.D. Embury, K.T. Conlon, M. Véron, and Y. Bréchet: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 873–81.10.1016/j.msea.2003.11.084 ↗
97. S.S. Sohn, S. Hong, J. Lee, B.C. Suh, S.K. Kim, B.J. Lee, N.J. Kim, and S. Lee: Acta Mater., 2015, vol. 100, pp. 39–52.10.1016/j.actamat.2015.08.027 ↗
98. O. Bouaziz, S. Allain, C.P. Scott, P. Cugy, and D. Barbier: Curr. Opin. Solid State Mater. Sci., 2011, vol. 15, pp. 141–68.10.1016/j.cossms.2011.04.002 ↗
99. L. Zhao, D. Zhu, L. Liu, Z. Hu, and M. Wang: Acta Metall. Sin. (Engl. Lett.), 2014, vol. 27, pp. 601–8.10.1007/s40195-014-0100-0 ↗
100. V. Shterner, A. Molotnikov, I. Timokhina, Y. Estrin, and H. Beladi: Mater. Sci. Eng. A, 2014, vol. 613, pp. 224–31.10.1016/j.msea.2014.06.073 ↗