Deformation and Recrystallization Behavior of the Cast Structure in Large Size, High Strength Steel Ingots: Experimentation and Modeling
Source abstract
Abstract
Constitutive modeling of the ingot breakdown process of large size ingots of high strength steel was carried out through comprehensive thermomechanical processing using Gleeble 3800® thermomechanical simulator, finite element modeling (FEM), optical and electron back scatter diffraction (EBSD). For this purpose, hot compression tests in the range of 1473 K to 1323 K (1200 °C to 1050 °C) and strain rates of 0.25 to 2 s−1 were carried out. The stress-strain curves describing the deformation behavior of the dendritic microstructure of the cast ingot were analyzed in terms of the Arrhenius and Hansel-Spittel models which were implemented in Forge NxT 1.0® FEM software. The results indicated that the Arrhenius model was more reliable in predicting microstructure evolution of the as-cast structure during ingot breakdown, particularly the occurrence of dynamic recrystallization (DRX) process which was a vital parameter in estimating the optimum loads for forming of large size components. The accuracy and reliability of both models were compared in terms of correlation coefficient (R) and the average absolute relative error (ARRE).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. SF2000 Data Sheet (2013), http://www.sorelforge.com. Accessed September 2013.
2. H.J. McQueen and J.J. Jonas, in Treatise on Materials Science & Technology, ed. A. R.J, Elsevier, 1975, vol. Volume 6, pp. 393–493.10.1016/B978-0-12-341806-7.50014-3 ↗
3. E.I. Poliak and J.J. Jonas, ISIJ International, 2003, 43, 684-691.10.2355/isijinternational.43.684 ↗
4. E.I. Poliak and J.J. Jonas, ISIJ International, 2003, 43, 692-700.10.2355/isijinternational.43.692 ↗
5. A. Marchattiwar, A. Sarkar, J.K. Chakravartty and B.P. Kashyap, J. of Materi Eng and Perform, 2013, 22, 2168-2175.10.1007/s11665-013-0496-0 ↗
6. Y. Han, G. Qiao, J. Sun and D. Zou, Computational Materials Science, 2013, 67, 93-103.10.1016/j.commatsci.2012.07.028 ↗
7. Y.C. Lin and C. Xiao-Min, Materials & Design, 2011, 32, 1733-1759.10.1016/j.matdes.2010.11.048 ↗
8. Y.C. Lin and X.M. Chen, Computational Materials Science, 2010, 49, 628-633.10.1016/j.commatsci.2010.06.004 ↗
9. D. Samantaray, S. Mandal and A.K. Bhaduri, Computational Materials Science, 2009, 47, 568-576.10.1016/j.commatsci.2009.09.025 ↗
10. D.L. Preston, D.L. Tonks and D.C. Wallace, Journal of Applied Physics, 2003, 93, 211-220.10.1063/1.1524706 ↗
11. M.C. Price, A.T. Kearsley and M.J. Burchell, International Journal of Impact Engineering, 2013, 52, 1-10.10.1016/j.ijimpeng.2012.09.001 ↗
12. H.Y. Li, D.-D. Wei, Y.H. Li and X.F. Wang, Materials & Design, 2012, 35, 557-562.10.1016/j.matdes.2011.08.049 ↗
13. O. Sabokpa, A. Zarei-Hanzaki, H.R. Abedi and N. Haghdadi, Materials & Design, 2012, 39, 390-396.10.1016/j.matdes.2012.03.002 ↗
14. Y.F. Li, Z.H. Wang, L.Y. Zhang, C. Luo and X.C. Lai, Transactions of Nonferrous Metals Society of China, 2015, 25, 1889-1900.10.1016/S1003-6326(15)63796-7 ↗
15. H.J. McQueen and N.D. Ryan, Materials Science and Engineering: A, 2002, 322, 43-63.10.1016/S0921-5093(01)01117-0 ↗
16. M. El Mehtedi, F. Musharavati and S. Spigarelli, Materials & Design, 2014, 54, 869-873.10.1016/j.matdes.2013.09.013 ↗
17. A. Hensel and T. Spittel, Kraft-und Arbeitsbedarf bildsamer Formgeburgsverfahren. VEB DeutscherVerlag fur Grundstoffindustrie, Leipzig, 1978 (in German).
18. Y.C. Lin, M.S. Chen and J. Zhong, Computational Materials Science, 2008, 42, 470-477.10.1016/j.commatsci.2007.08.011 ↗
19. Y.C. Lin, M.S. Chen and J. Zhong, Mechanics Research Communications, 2008, 35, 142-150.10.1016/j.mechrescom.2007.10.002 ↗
20. Y.C. Lin and G. Liu, Computational Materials Science, 2010, 48, 54-58.10.1016/j.commatsci.2009.06.026 ↗
21. W. Peng, W. Zeng, Q. Wang and H. Yu, Materials & Design, 2013, 51, 95-104.10.1016/j.matdes.2013.04.009 ↗
22. H. Yuan-Chun, Y.C. Lin, D. Jiao, L. Ge and C. Ming-Song, Materials & Design, 2014, 53, 349-356.10.1016/j.matdes.2013.06.070 ↗
23. S. Marie, R. Ducloux, P. Lasne, J. Barlier and L. Fourment, ESAFORM 2014, Espoo, Finland, 2014.
24. P. Opla, I. Schindler, T. Petrek, P. Kawulok, F. Vanura, R. Kawulok and S. Rusz, METAL 2014, Brno, Czech republic, 2014.
25. X. Duan and T. Sheppard, Journal of Materials Processing Technology, 2004, 150, 100-06.10.1016/j.jmatprotec.2004.01.026 ↗
26. S.L. Semiatin, D.S. Weaver, R.C. Kramb, P.N. Fagin, M.G. Glavicic, R.L. Goetz, N.D. Frey and M.M. Antony, Metallurgical and Materials Transactions A, 2004, 35A, 679-693.10.1007/s11661-004-0379-y ↗
27. S.I. Oh, S.L. Semiatin and J.J. Jonas, MTA, 1992, 23, 963-975.10.1007/BF02675571 ↗
28. G.E. Dieter, H.A. Kuhn and S.L. Semiatin, Handbook of Workability and Process Design, Asm International, 2003.
29. G.Z. Quan, G.S. Li, T. Chen, Y.X. Wang, Y.W. Zhang and J. Zhou, Materials Science and Engineering: A, 2011, 528, 4643-4651.10.1016/j.msea.2011.02.090 ↗
30. M.-S. Chen, Y.C. Lin and X.-S. Ma, Materials Science and Engineering: A, 2012, 556, 260-266.10.1016/j.msea.2012.06.084 ↗
31. X. Xiao, G.Q. Liu, B.F. Hu, X. Zheng, L.N. Wang, S.J. Chen and A. Ullah, Computational Materials Science, 2012, 62, 227-234.10.1016/j.commatsci.2012.05.053 ↗
32. J.J. Jonas, C. Ghosh, X. Quelennec and V.V. Basabe, ISIJ International, 2013, 53, 145-151.10.2355/isijinternational.53.145 ↗
33. E.I. Poliak and J.J. Jonas, Acta Materialia, 1996, 44, 127-136.10.1016/1359-6454(95)00146-7 ↗
34. K. Chadha, D. Shahriari and M. Jahazi, La Metallurgia Italiana - International Journal of the Italian Association for Metallurgy, 2016, 4, 5-12.
35. J. Rojek, O.C. Zienkiewicz, E. Oñate and E. Postek, Journal of Materials Processing Technology, 2001, 119, 41-47.10.1016/S0924-0136(01)00894-9 ↗
36. P. Mahajan, L. Fourment and J.L. Chenot, Engineering Computations, 1998, 15, 908-924.10.1108/02644409810236911 ↗
37. R.L. Goetz and S.L. Semiatin, J. of Materi Eng and Perform, 2001, 10, 710-717.10.1361/105994901770344593 ↗
38. M.C. Mataya and V.E. Sackschewsky, Metallurgical and Materials Transactions A, 1994, 25, 2737-2752.10.1007/BF02649226 ↗
39. K. Chadha, D. Shahriari and M. Jahazi, presented in part at the FiMPART, Hyderabad, India, 2015.
40. L. Yunping, E. Onodera and A. Chiba, Materials Transactions, 2010, 51, 1210-1215.10.2320/matertrans.M2010056 ↗
41. Y.C. Lin, M.S. Chen and J. Zhong, Journal of Central South University (Science and Technology), 2008, 39, 549-553.
42. Y.C. Lin, M.S. Chen and J. Zhong, Computational Materials Science, 2008, 44, 316-321.10.1016/j.commatsci.2008.03.027 ↗
43. S.L. Semiatin, D.S. Weaver, P.N. Fagin, M.G. Glavicic, R.L. Goetz, N.D. Frey, R. C. Kramb and M.M. Antony, Metallurgical and Materials Transactions A (Physical Metallurgy and Materials Science), 2004, 35A, 679-693.10.1007/s11661-004-0379-y ↗
44. S. Hotta, T. Murakami, T. Narushima, Y. Iguchi and C. Ouchi, ISIJ International, 2005, 45, 338-346.10.2355/isijinternational.45.338 ↗
45. D. Samantaray, S. Mandal and A.K. Bhaduri, Materials & Design, 2011, 32, 2797-2802.10.1016/j.matdes.2011.01.007 ↗