journal article·2017-09

Columnar-to-Equiaxed Transition and Equiaxed Grain Alignment in Directionally Solidified Ni3Al Alloy Under an Axial Magnetic Field

Huan Liu, Weidong Xuan, Xinliang Xie, Chuanjun Li, Jiang Wang, Jianbo Yu, Xi Li, Yunbo Zhong, Zhongming Ren

Publisher page

Abstract

The effect of an axial magnetic field on the solidification structure in directionally solidified Ni-21.5Al-0.4Zr-0.1B (at. pct) alloy was investigated. The experimental results indicated that the application of a high magnetic field caused the deformation of dendrites and the occurrence of columnar-to-equiaxed transition (CET). The magnetic field tended to orient the 〈001〉 crystal direction of the equiaxed grains along the magnetic field direction. The bulk solidification experiment under a high magnetic field showed that the crystal exhibited magnetic crystalline anisotropy. Further, the thermoelectric (TE) magnetic force and TE magnetic convention were analyzed by three-dimensional (3-D) numerical simulations. The results showed that the maximum value of TE magnetic force localized in the vicinity of the secondary dendrite arm root, which should be responsible for the dendrite break and CET. Based on the high-temperature creep mechanism, a simple model was proposed to describe the magnetic field intensity needed for CET: $$ B \ge kG - 1.5 R1.25 $$ . The model is in good agreement with the experiment results. The experimental results should be attributed to the combined action of TE magnetic effects and the magnetic moment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Intermetallics and Advanced Alloy Properties · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. S. Asai: Sci. Technol. Adv. Mater., 2000, vol. 1, pp. 191–200.10.1016/S1468-6996(00)00016-4 ↗
2. S. Chandrasekhar: Philos. Mag. Ser., 1954, vol. 45, pp. 1177–91.10.1080/14786441108520544 ↗
3. D. Samanta and N. Zabaras: Int. J. Heat Mass Transfer, 2006, vol. 49, pp. 4850–66.10.1016/j.ijheatmasstransfer.2006.05.045 ↗
4. A. Kao, B. Cai, P.D. Lee, and K. Pericleous: J. Cryst. Growth, 2017, vol. 457, pp. 270–74.10.1016/j.jcrysgro.2016.07.003 ↗
5. Q. Wang, T. Liu, A. Gao, C. Zhang, C.J. Wang, and J.C. He: Scripta Mater., 2007, vol. 56, pp. 1087–90.10.1016/j.scriptamat.2007.02.026 ↗
6. X. Li, A. Gagnoud, Z.M. Ren, Y. Fautrelle, and R. Moreau: Acta Mater., 2009, vol. 57, pp. 2180–97.10.1016/j.actamat.2009.01.016 ↗
7. J. Wang, Z.M. Ren, Y. Fautrelle, X. Li, H. Nguyen-Thi, N. Mangelinck-Noel, G.S.A. Jaoude, Y.B. Zhong, I. Kaldre, and A. Bojarevics: J. Mater. Sci., 2013, vol. 48, pp. 213–19.10.1007/s10853-012-6730-6 ↗
8. X. Li, Y. Fautrelle, and Z.M. Ren: Scripta Mater., 2008, vol. 59, pp. 407–10.10.1016/j.scriptamat.2008.04.028 ↗
9. Y. Mitsui, K. Oikawa, K. Koyama, and K. Watanabe: J. Alloys Compd., 2013, vol. 577, pp. 315–19.10.1016/j.jallcom.2013.05.198 ↗
10. L. Li, Z.H. Zhao, Y.B. Zuo, Q.F. Zhu, and J.Z. Cui: J. Mater. Res., 2013, vol. 28, pp. 1567–73.10.1557/jmr.2013.155 ↗
11. S. Asai: ISIJ Int., 2007, vol. 47, pp. 519–22.10.2355/isijinternational.47.519 ↗
12. X. Li, Y. Fautrelle, K. Zaidat, A. Gagnoud, Z.M. Ren, R. Moreau, Y.D. Zhang, and C. Esling: J. Cryst. Growth, 2010, vol. 312, pp. 267–72.10.1016/j.jcrysgro.2009.10.002 ↗
13. X. Li, A. Gagnoud, Y. Fautrelle, Z.M. Ren, R. Moreau, Y.D. Zhang, and C. Esling: Acta Mater., 2012, vol. 60, pp. 3321–32.10.1016/j.actamat.2012.02.019 ↗
14. W.D. Xuan, Z.M. Ren, and C.J. Li: J. Alloy Compd., 2015, vol. 620, pp. 10–17.10.1016/j.jallcom.2014.09.114 ↗
15. D.F. Du, L. Hou, A. Gagnoud, Z.M. Ren, Y. Fautrelle, G.H. Cao, and X. Li: J. Alloy Compd., 2014, vol. 588, pp. 190–98.10.1016/j.jallcom.2013.11.011 ↗
16. Y. Mishima, S. Ochiai, and Y.M. Yodagama: Trans. JIM, 1986, vol. 27, pp. 41–50.10.2320/matertrans1960.27.41 ↗
17. P. Jozwik, W. Polkowski, and Z. Bojar: Materials, 2015, vol. 8, pp. 2537–68.10.3390/ma8052537 ↗
18. S.C. Deevi, V.K. Sikka, and C.T. Liu: Progr. Mater. Sci., 1997, vol. 42, pp. 177–92.10.1016/S0079-6425(97)00014-5 ↗
19. K. Aoki and O. Izumi: J. Jpn. Inst. Met., 1979, vol. 43, pp. 358–59.10.2320/jinstmet1952.43.4_358 ↗
20. S.C. Deevi and V.K. Sikka: Intermetallics, 1996, vol. 4, pp. 357–75.10.1016/0966-9795(95)00056-9 ↗
21. V.K. Sikka, M.L. Santella, and J.E. Orth: Mater. Sci. Eng. A, 1997, vols. 239–240, pp. 564–69.10.1016/S0921-5093(97)00631-X ↗
22. N.S. Stoloff, C.T. Liu, and S.C. Deevi: Intermetallics, 2000, vol. 8, pp. 1313–20.10.1016/S0966-9795(00)00077-7 ↗
23. V.K. Sikka, J.T. Mavity, and K. Anderson: Mater. Sci. Eng. A, 1992, vol. 153, pp. 712–21.10.1016/0921-5093(92)90276-7 ↗
24. C.T. Liu and V.K. Sikka: JOM, 1986, vol. 38, pp. 19–21.10.1007/BF03257837 ↗
25. V.K. Sikka, S.C. Deevi, S. Viswanathan, R.W. Swindeman, and M.L. Santella: Intermetallics, 2000, vol. 8, pp. 1329–37.10.1016/S0966-9795(00)00078-9 ↗
26. O. Hunziker and W. Kurz: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3167–75.10.1007/s11661-999-0227-1 ↗
27. F. Baltaretu, J. Wang, S. Letout, Z.M. Ren, X. Li, O. Budenkova, and Y. Fautrelle: Magnetohydrodynamics, 2015, vol. 51, pp. 45–55.10.22364/mhd.51.1.6 ↗
28. J.E. Enderby and B.C. Dupree: Philos. Mag., 1997, vol. 35, pp. 791–93.10.1080/14786437708236005 ↗
29. H. Carreon: Nondestruct. Testing Eval., 2009, vol. 24, pp. 233–41.10.1080/10589750802339679 ↗
30. N.S. Stoloff: Int. Mater. Rev., 1989, vol. 34, pp. 153–84.10.1179/imr.1989.34.1.153 ↗
31. G. Pottlacher, H. Hosaeus, B. Wilthan, E. Kaschnitz, and A. Seifter: Thermochim. Acta, 2002, vol. 382, pp. 255–67.10.1016/S0040-6031(01)00751-1 ↗
32. D.R. Lide: CRC Handbook of Chemistry and Physics, 90th ed., CRC Press, Boca Raton, FL, 2010, pp. 12–41
33. H.C. Yi, A. Varma, A.S. Rogachev, and P.J. Mcginn: Ind. Eng. Chem. Res., 1996, vol. 35, pp. 2982–85.10.1021/ie950750v ↗
34. P. Lehmann, R. Moreau, D. Camel, and R. Bolcato: Acta Mater., 1998, vol. 46, pp. 4067–79.10.1016/S1359-6454(98)00064-0 ↗
35. W. Kurz and D.J. Fisher: Acta Metall., 1981, vol. 29, pp. 11–20.10.1016/0001-6160(81)90082-1 ↗
36. A.K. Mukherjee, J.E. Bird, and J.E. Dorn: Trans. ASM, 1969, vol. 62, pp. 155–79.
37. T.G. Langdon: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 249–60.10.1007/s11661-002-0087-4 ↗
38. F.C. Monkman and N.J. Grant: Proc. ASTM, 1956, vol. 56, pp. 593–620.
39. J.D. Hunt: Mater. Sci. Eng., 1984, vol. 65, pp. 75–83.10.1016/0025-5416(84)90201-5 ↗
40. A.E. Mikelson and Y.K. Karklin: J. Cryst. Growth, 1981, vol. 52, pp. 524–29.10.1016/0022-0248(81)90333-X ↗
41. J. Delafond, A. Junqua, and J. Mimault: Phys. Status Solidi A, 1973, vol. 20, pp. 195–200.10.1002/pssa.2210200118 ↗