Effects of Low Temperature on Hydrogen-Assisted Crack Growth in Forged 304L Austenitic Stainless Steel
Source abstract
Abstract
The objective of this study was to evaluate effects of low temperature on hydrogen-assisted crack propagation in forged 304L austenitic stainless steel. Fracture initiation toughness and crack-growth resistance curves were measured using fracture mechanics specimens that were thermally precharged with 140 wppm hydrogen and tested at 293 K or 223 K (20 °C or −50 °C). Fracture initiation toughness for hydrogen-precharged forgings decreased by at least 50 to 80 pct relative to non-charged forgings. With hydrogen, low-temperature fracture initiation toughness decreased by 35 to 50 pct relative to room-temperature toughness. Crack growth without hydrogen at both temperatures was microstructure-independent and indistinguishable from blunting, while with hydrogen microcracks formed by growth and coalescence of microvoids. Initiation of microvoids in the presence of hydrogen occurred where localized deformation bands intersected grain boundaries and other deformation bands. Low temperature additionally promoted fracture initiation at annealing twin boundaries in the presence of hydrogen, which competed with deformation band intersections and grain boundaries as sites of microvoid formation and fracture initiation. A common ingredient for fracture initiation was stress concentration that arose from the intersection of deformation bands with these microstructural obstacles. The localized deformation responsible for producing stress concentrations at obstacles was intensified by low temperature and hydrogen. Crack orientation and forging strength were found to have a minor effect on fracture initiation toughness of hydrogen-supersaturated 304L forgings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. M.R. Louthan, Jr.: Hydrogen in Metals: Proceedings of an International Conference on the Effects of Hydrogen on Materials Properties and Selection and Structural Design, Champion, PA, 23–27 Sept 1973, I.M. Bernstein and A.W. Thompson, eds., ASM, New York, 1974, pp. 53–75.
2. G.R. Caskey Jr: Scripta Metall., 1977, vol. 11, pp. 1077–83.10.1016/0036-9748(77)90311-8 ↗
3. G.R. Caskey, Jr.: Proceedings of the Conference on Environmental Degradation of Engineering Materials, Blacksburg, VA, 10–12 Oct 1977, Virginia Polytechnic Institute, pp. 437–49.
4. G.R. Caskey, Jr.: Proceedings of the 2nd International Conference on Environmental Degradation of Engineering Materials, Blacksburg, VA, 21 Sept 1981, Virginia Polytechnic Institute, pp. 283–302.
5. G.R. Caskey, Jr.: Fractography and Materials Science, ASTM STP 733, L.N. Gilbertson and R.D. Zipp, eds., ASTM, Philadelphia, PA, 1981, pp. 86–97.
6. G.R. Caskey Jr: Hydrogen Compatibility Handbook for Stainless Steels (DP-1643), E.I. du Pont de Nemours & Co. and Savannah River Laboratory, Aiken, SC, 1983.10.2172/5906050 ↗
7. J.H. Holbrook and A.J. West: Hydrogen Effects in Metals, I.M. Bernstein and A.W. Thompson, eds., The Metallurgical Society of AIME, Warrendale, PA, 1981, pp. 655–63.
8. J.R. Buckley and D. Hardie: Corros. Sci., 1993, vol. 34, pp. 93-107.10.1016/0010-938X(93)90261-E ↗
9. G. Han, J. He, S. Fukuyama, and K. Yokogawa: Acta Mater., 1998, vol. 46, pp. 4559-70.10.1016/S1359-6454(98)00136-0 ↗
10. L. Zhang, M. Wen, M. Imade, S. Fukuyama, and K. Yokogawa: Fracture of Nano and Engineering Materials and Structures: Proceedings of the 16th European Conference of Fracture (ECF16), Alexandroupolis, Greece, 3–7 July 2006.
11. L. Zhang, M. Wen, M. Imade, S. Fukuyama, and K. Yokogawa: Acta Mater., 2008, vol. 56, pp. 3414-21.10.1016/j.actamat.2008.03.022 ↗
12. L. Zhang, M. Imade, B. An, M. Wen, T. Iijima, S. Fukuyama, and K. Yokogawa: ISIJ Int., 2012, vol. 52, pp. 240-46.10.2355/isijinternational.52.240 ↗
13. C. San Marchi, N.Y.C. Yang, T.J. Headley, and J. Michael: Proceedings of the 18th European Conference on Fracture (ECF18), Dresden, Germany, 30 Aug–3 Sep 2010.10.1016/j.engfailanal.2010.12.016 ↗
14. C. San Marchi, B.P. Somerday, and H.F. Jackson: 2nd International Conference of Engineering Against Fracture (ICEAF II), Mykonos, Greece, 22–24 June 2011.
15. M.R. Dietrich, G.R. Caskey, Jr., and J.A. Donovan: Proceedings of the 3rd International Conference on Effects of Hydrogen on Materials, Jackson Lake, WY, 26–31 Aug 1980.
16. M.J. Morgan and M.H. Tosten: Proceedings of the 5th International Conference on Hydrogen Effects on Material Behavior, Moran, WY, 11–15 Sept 1994.
17. M.J. Morgan: ASME 2008 Pressure Vessels and Piping Conference, Chicago, IL, 27–31 July 2008, PVP2008-61390.
18. K.A. Nibur, B.P. Somerday, D.K. Balch, C. SanMarchi: Acta Mater., 2009, 57: 3795-809.10.1016/j.actamat.2009.04.027 ↗
19. A.W. Thompson and I.M. Bernstein: Advances in Corrosion Science and Technology, vol. 7, M.G. Fontana and R.W. Staehle, eds., Plenum Press, New York, 1980, pp. 53–175.
20. D.G. Ulmer and C.J. Altstetter: Acta Metall. Mater., 1991, vol. 39, pp. 1237-48.10.1016/0956-7151(91)90211-I ↗
21. J. Talonen and H. Hänninen: Acta Mater., 2007, vol. 55, pp. 6108-18.10.1016/j.actamat.2007.07.015 ↗
22. C.G. Rhodes and A.W. Thompson: Metall. Trans. A, 1977, vol. 8A, pp. 1901-06.10.1007/BF02646563 ↗
23. D.P. Abraham and C.J. Altstetter: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2859-71.10.1007/BF02669644 ↗
24. C. Altstetter and D. Abraham: Proceedings of the 5th International Conference on the Effect of Hydrogen on the Behavior of Materials, Moran, WY, 11–14 Sept 1994, A.W. Thompson and N.R. Moody, eds., TMS, Warrendale, 1996, pp. 599–609.10.1002/9781118803363.ch52 ↗
25. H.F. Jackson, C. San Marchi, D.K. Balch, and B.P. Somerday: Corros. Sci., 2013, vol. 77, pp. 210-21.10.1016/j.corsci.2013.08.004 ↗
26. ASTM E8-11: Standard Test Method for Tension Testing of Metallic Materials, ASTM International, West Conshohocken, PA.
27. ASTM E1820-09: Standard Test Method for Measurement of Fracture Toughness, ASTM International, West Conshohocken, PA.
28. ASTM E1737-96: Standard Test Method for J-Integral Characterization of Fracture Toughness, ASTM International, West Conshohocken, PA.
29. C. San Marchi, B.P. Somerday, and S.L. Robinson: Int. J. Hydrogen Energy, 2007, vol. 32, pp. 100-116.10.1016/j.ijhydene.2006.05.008 ↗
30. F. Lecroisey and A. Pineau: Metall. Trans., 1972, vol. 3, pp. 387-96.10.1007/BF02642042 ↗
31. P.L. Mangonon Jr. and G. Thomas: Metall. Trans., 1970, vol. 1, pp. 1577-86.10.1007/BF02642003 ↗
32. J.F. Breedis and L. Kaufman: Metall. Trans., 1971, vol. 2, pp. 2359-71.10.1007/BF02814874 ↗
33. L. Rémy and A. Pineau: Metall. Trans., 1974, vol. 5, pp. 963-65.10.1007/BF02643159 ↗
34. L. Rémy: Metall. Trans. A, 1981, vol. 12A, pp. 387-408.10.1007/BF02648536 ↗
35. G. Olson and M. Cohen: Metall. Trans. A, 1976, vol. 7A, pp. 1915–23.10.1007/BF02659824 ↗
36. A. West and M. Louthan: Metall. Trans. A, 1982, vol. 13, pp. 2049-58.10.1007/BF02645950 ↗
37. C. San Marchi, B.P. Somerday, X. Tang, and G.H. Schiroky: Int. J. Hydrogen Energy, 2008, vol. 33, pp. 889-904.10.1016/j.ijhydene.2007.10.046 ↗
38. M.R. Louthan Jr, G.R. Caskey Jr, J.A. Donovan, and D.E. Rawl Jr: Mater. Sci. Eng., 1972, vol. 10, pp. 357-68.10.1016/0025-5416(72)90109-7 ↗
39. C.D. Beachem: Metall. Trans., 1972, vol. 60, pp. 437-51.
40. H.K. Birnbaum and P. Sofronis: Mater. Sci. Eng., A, 1994, vol. A176, pp. 191-202.10.1016/0921-5093(94)90975-X ↗
41. K.A. Nibur, D.F. Bahr, and B.P. Somerday: Acta Mater., 2006, vol. 54, pp. 2677-84.10.1016/j.actamat.2006.02.007 ↗
42. R.P. Reed and M.W. Austin: Scripta Metall., 1989, vol. 23, pp. 1359-62.10.1016/0036-9748(89)90059-8 ↗
43. C. San Marchi, T. Michler, K.A. Nibur, and B.P. Somerday: Int. J. Hydrogen Energy, 2010, vol. 35, pp. 9736-45.10.1016/j.ijhydene.2010.06.018 ↗
44. S. Liu, T. Hashida, H. Takahashi, H. Kuwano, and Y. Hamaguchi: Metall. Mater. Trans. A, 1998, vol. 29, pp. 791-98.10.1007/s11661-998-0270-3 ↗
45. S. Liu, S. Liu, and D. Liu: J. Mater. Sci., 2004, vol. 39, pp. 2841-48.10.1023/B:JMSC.0000021462.52100.99 ↗
46. S. Liu, D. Liu, and S. Liu: J. Mater. Sci., 2007, vol. 42, pp. 7514-19.10.1007/s10853-007-1614-x ↗
47. S. Takaki, T. Furuya, and Y. Tokunaga: ISIJ Int., 1990, vol. 30, pp. 632-38.10.2355/isijinternational.30.632 ↗
48. P. Müllner, C. Solenthaler, P.J. Uggowitzer, and M.O. Speidel: Acta Metall. Mater., 1994, vol. 42, pp. 2211-17.10.1016/0956-7151(94)90300-X ↗
49. P. Müllner: Mater. Sci. Eng., A, 1997, vol. A234-236, pp. 94-97.10.1016/S0921-5093(97)00196-2 ↗
50. R.L. Tobler and D. Meyn: Metall. Trans. A, 1988, vol. 19, pp. 1626-31.10.1007/BF02674040 ↗
51. R.J. Ilola, H.E. Hanninen, and K.M. Ullakko: ISIJ Int., 1996, vol. 36, pp. 873-77.10.2355/isijinternational.36.873 ↗
52. Y. Tomota, Y. Xia, and K. Inoue: Acta Mater., 1998, vol. 46, pp. 1577-87.10.1016/S1359-6454(97)00350-9 ↗
53. B. An, H. Itouga, T. Iijima, C. San Marchi, and B. Somerday: ASME 2013 Pressure Vessels and Piping Conference, Paris, France, 14–18 July 2013, PVP2013-97355.
54. L. Rémy: Acta Metall., 1977, vol. 25, pp. 711-14.10.1016/0001-6160(77)90013-X ↗
55. T. Ezaz, M.D. Sangid, and H. Sehitoglu: Philos. Mag., 2011, vol. 91, pp. 1464-88.10.1080/14786435.2010.541166 ↗
56. C.L. Lai, L.W. Tsay, and C. Chen: Materials Science and Engineering: A, 2013, vol. 584, pp. 14-20.10.1016/j.msea.2013.07.004 ↗
57. T.C. Chen, S.T. Chen, and L.W. Tsay: Int. J. Hydrogen Energy, 2014, vol. 39, pp. 10293-302.10.1016/j.ijhydene.2014.04.144 ↗
58. Y.H. Chang, C. Luo, C.A. Chen, and S.X. Chen: Materials Science and Engineering: A, 2013, vol. 577, pp. 23-28.10.1016/j.msea.2013.04.030 ↗
59. C. San Marchi, D.K. Balch, K. Nibur, and B.P. Somerday: Journal of Pressure Vessel Technology, 2008, vol. 130, pp. 041401.10.1115/1.2967833 ↗
60. R.M. Latanision and J. A.W. Ruff: Metall. Trans., 1971, vol. 2, pp. 505-09.10.1007/BF02663341 ↗
61. F. Abrassart: Metall. Trans., 1973, vol. 4, pp. 2205-16.10.1007/BF02643289 ↗
62. J. Singh: J. Mater. Sci., 1985, vol. 20, pp. 3157-66.10.1007/BF00545181 ↗
63. H.F. Jackson, K.A. Nibur, C. San Marchi, J.D. Puskar, and B.P. Somerday: Corros. Sci., 2012, vol. 60, pp. 136-44.10.1016/j.corsci.2012.03.046 ↗
64. S. Suresh, A.K. Vasudevan, M. Tosten, and P.R. Howell: Acta Metall., 1987, vol. 35, pp. 25-46.10.1016/0001-6160(87)90210-0 ↗
65. S. Suresh and C.F. Shih: Int. J. Fracture, 1986, vol. 30, pp. 237-59.10.1007/BF00019705 ↗
66. G. Kurdjumov and G. Sachs: Z. Phys., 1930, vol. 64, pp. 325–43.10.1007/BF01397346 ↗
67. Z. Nishiyama: Sci. Rep. Res. Inst., 1934, vol. 23, pp. 637–64.
68. G. Wasserman: Arch. Eisenhuttenwes., 1933, vol. 16, p. 647.
69. R.O. Ritchie and A.W. Thompson, Metall. Trans A, 1985, vol. 16A, pp. 233-48.10.1007/BF02816050 ↗
70. M. Koyama, H. Springer, S.V. Merzlikin, K. Tsuzaki, E. Akiyama, and D. Raabe: Int. J. Hydrogen Energy, 2014, vol. 39, pp. 4634-46.10.1016/j.ijhydene.2013.12.171 ↗
71. M. Hatano, M. Fujinami, K. Arai, H. Fujii, and M. Nagumo: Acta Mater., 2014, vol. 67, pp. 342-53.10.1016/j.actamat.2013.12.039 ↗
72. L. Zhang, B. An, T. Iijima, C. San Marchi, and B. Somerday: ASME 2015 Pressure Vessels & Piping Conference, Boston, MA, 19–23 July, 2015, PVP2015-45211.
73. M.R. Louthan, Jr., G.R. Caskey, Jr., J.A. Donovan, and D.E. Rawl, Jr.: Materials Science and Engineering A, 1972, vol. 10, pp. 357-68.10.1016/0025-5416(72)90109-7 ↗
74. A.J. West, Jr. and M.R. Louthan, Jr.: Metall. Trans. A, 1982, vol. 13A, pp. 2049-58.10.1007/BF02645950 ↗
75. G.R. Caskey: Hydrogen Degradation of Ferrous alloys, R.A. Oriani, J.P. Hirth, and M. Smialowski, eds., Noyes Publications, Park Ridge, NJ, 1985, p. 822–62.