Laser Cladding of γ-TiAl Intermetallic Alloy on Titanium Alloy Substrates
Source abstract
Abstract
The enhancement of titanium and titanium alloy's tribological properties is of major interest in many applications such as the aerospace and automotive industry. Therefore, the current research paper investigates the laser cladding of Ti48Al2Cr2Nb powder onto Ti6242 titanium alloy substrates. The work was carried out in two steps. First, the optimal deposition parameters were defined using the so-called “combined parameters,” i.e., the specific energy E specific and powder density G. Thus, the results show that those combined parameters have a significant influence on the geometry, microstructure, and microhardness of titanium aluminide-formed tracks. Then, the formation of dense, homogeneous, and defect-free coatings based on optimal parameters has been investigated. Optical and scanning electron microscopy techniques as well as energy-dispersive spectroscopy and X-ray diffraction analyses have shown that a duplex structure consisting of γ-TiAl and α 2-Ti3Al phases was obtained in the coatings during laser cladding. Moreover, it was shown that produced coatings exhibit higher values of microhardness (477 ± 9 Hv0.3) and wear resistance (average friction coefficient is 0.31 and volume of worn material is 5 mm3 after 400 m) compared to those obtained with bare titanium alloy substrates (353 Hv0.3, average friction coefficient is 0.57 and a volume of worn material after 400 m is 35 mm3).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Entropy Alloys Studies · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. C. Leyens and M. Peters: Titanium and Titanium Alloys: Fundamentals and Applications, Wiley, Weinheim, 2003, p. 532.10.1002/3527602119 ↗
2. F.H. Froes: Mater. Sci. Eng. A, 1994, vol. 184, pp. 119–33.10.1016/0921-5093(94)91026-X ↗
3. K. Kothari, R. Radhakrishnan, and N.M. Wereley: Prog. Aerospace Sci., 2012, vol. 55, pp. 1–16.10.1016/j.paerosci.2012.04.001 ↗
4. R. Hutchings, and W.C. Oliver: Wear, 1983, vol. 92, pp. 143-53.10.1016/0043-1648(83)90014-5 ↗
5. Y. Itoh, A. Itoh, H. Azuma, and T. Hioki: Surf. Coat. Technol., 1999, vol. 111, pp. 172–76.10.1016/S0257-8972(98)00728-2 ↗
6. R. Martinella, S. Giovanardi, G. Chevallard, M. Villani, A. Molinari, and C. Tosello: Mater. Sci. Eng., 1985, vol. 69, pp. 247-52.10.1016/0025-5416(85)90399-4 ↗
7. A. Zhecheva, S. Malinov, and W. Sha: Surf. Coat. Technol., 2006, vol. 201, pp. 2467–74.10.1016/j.surfcoat.2006.04.019 ↗
8. F. Borgioli, E. Galvanetto, F. Iozzelli, and G. Pradelli: Mater. Lett., 2005, vol. 59 2159–62.10.1016/j.matlet.2005.02.054 ↗
9. H. Guleryuz, and H. Cimenoglu: Surf. Coat. Technol., 2005, vol. 192, pp. 164–70.10.1016/j.surfcoat.2004.05.018 ↗
10. H. Guleryuz, and H. Cimenoglu: Biomaterials, 2004, vol. 25, pp. 3325–33.10.1016/j.biomaterials.2003.10.009 ↗
11. V. Higuera, F.J. Belzunce, and J. Riba: Surf. Coat. Technol., 2006, vol. 200, pp. 5550–56.10.1016/j.surfcoat.2005.07.070 ↗
12. Y.P. Kathuria: Surf. Coat. Technol., 2000, vol. 132, pp. 262−69.10.1016/S0257-8972(00)00735-0 ↗
13. Y.S. Tian, C.Z. Chen, S.T. Li, and Q.H. Huo: Appl. Surf. Sci., 2005, vol. 242, pp. 177-84.10.1016/j.apsusc.2004.08.011 ↗
14. B. Cárcel, A. Serrano, J. Zambrano, V. Amigó, and A.C. Cárcel: Phys. Procedia, 2014, vol. 56, pp. 284-93.10.1016/j.phpro.2014.08.173 ↗
15. O.G. Lenivtseva, I.A. Bataev, M.G. Golkovsky, V.V. Samoylenko, and R.A. Dostovalov: Obrabotka Metallov, 2013, vol. 60, pp. 103-9, (in Russian).
16. E. Toyserkani, A. Khajepour, and S. Corbin: Laser Cladding, 1st ed., CRC Press, Boca Raton, 2004, p. 263.10.1201/9781420039177 ↗
17. Q. Meng, L. Geng, and D. Ni: Mater. Lett., 2005, vol. 59, pp. 2774–77.10.1016/j.matlet.2005.03.056 ↗
18. R.L. Sun, D.Z. Yang, L.X. Guo, and S.L. Dong: Surf. Coat. Technol., 2000, vol. 132, pp. 251-5.10.1016/S0257-8972(00)00904-X ↗
19. J.A. Vreeling, V. Ocelik, and J.T.M. De Hosson: Acta Mater., 2002, vol. 50, pp. 4913–24.10.1016/S1359-6454(02)00366-X ↗
20. R.L. Sun, D.Z. Yang, L.X. Guo, and S.L. Dong: Surf. Coat. Technol., 2001, vol. 35, pp. 307-12.10.1016/S0257-8972(00)01082-3 ↗
21. H.M. Wang, and Y.F. Liu: Mater. Sci. Eng. A, 2002, vol. 338, pp. 126-32.10.1016/S0921-5093(02)00076-X ↗
22. K. Van Acker, D. Vanhoyweghen, R. Persoons, and J. Vangrunderbeek: Wear, 2005, vol. 258, pp. 194–202.10.1016/j.wear.2004.09.041 ↗
23. S. Mridha, and T.N. Baker: J. Mater. Process. Technol., 1997, vol. 63, pp. 432-37.10.1016/S0924-0136(96)02660-X ↗
24. Y.W. Kim: Journal of Materials, 1989, vol. 41, pp. 24-30.
25. E.A. Loria: Intermetallics, 2000, vol. 8, pp. 1339-45.10.1016/S0966-9795(00)00073-X ↗
26. E.A. Loria: Intermetallics, 2001, vol. 9, pp. 997-1001.10.1016/S0966-9795(01)00064-4 ↗
27. M.H. Loretto, D. Hu, and Y.G. Li: Intermetallics, 2000, vol. 8, pp. 1243-49.10.1016/S0966-9795(00)00035-2 ↗
28. D. Srivastava, I.T.H. Chang, and M.H. Loretto: Intermetallics, 2001, vol. 9, pp. 1003-13.10.1016/S0966-9795(01)00063-2 ↗
29. S. Biamino, A. Penna, U. Ackelid, S. Sabbadini, O. Tassa, P. Fino, M. Pavese, P. Gennaro, and C. Badini: Intermetallics, 2011, vol. 19, pp. 776-781.10.1016/j.intermet.2010.11.017 ↗
30. U. de Oliveira, V. Ocelik, and J.T.M. De Hosson: Surf. Coat. Technol., 2005, vol. 197, pp. 127–36.10.1016/j.surfcoat.2004.06.029 ↗
31. I.U. Smurov: Surf. Coat. Technol., 2008, vol. 202, pp. 4496–502.10.1016/j.surfcoat.2008.04.033 ↗
32. O.B. Kovalev, A.V. Zaitsev, D. Novichenko, and I. Smurov: J. Therm. Spray Technol., 2011, vol. 20, pp. 465-78.10.1007/s11666-010-9539-3 ↗
33. J.M. Pelletier, M.C. Sahour, M. Pilloz, and A.B. Vannes: J. Mater. Sci., 1993, vol. 28 5184-88.10.1007/BF00570061 ↗
34. X. Wu, B. Zhu, X. Zeng, X. Hu, and K. Cui: Surf. Coat. Technol., 1996, vol. 79, pp. 200-4.10.1016/0257-8972(95)02452-2 ↗
35. W.M. Steen, and C.G. H. Courtney: Mater. Sci. Technol., 1980, vol. 7, pp. 232-237.
36. Y. Liu, H. Li, S. Wang, and H. Ye: J. Mater. Res., 2009, vol. 24, pp. 3165-73.10.1557/jmr.2009.0394 ↗