journal article·2010-09

Probing Reliability of Transport Phenomena Based Heat Transfer and Fluid Flow Analysis in Autogeneous Fusion Welding Process

S. Bag, A. De

Publisher page

Abstract

The transport phenomena based heat transfer and fluid flow calculations in weld pool require a number of input parameters. Arc efficiency, effective thermal conductivity, and viscosity in weld pool are some of these parameters, values of which are rarely known and difficult to assign a priori based on the scientific principles alone. The present work reports a bi-directional three-dimensional (3-D) heat transfer and fluid flow model, which is integrated with a real number based genetic algorithm. The bi-directional feature of the integrated model allows the identification of the values of a required set of uncertain model input parameters and, next, the design of process parameters to achieve a target weld pool dimension. The computed values are validated with measured results in linear gas-tungsten-arc (GTA) weld samples. Furthermore, a novel methodology to estimate the overall reliability of the computed solutions is also presented.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. G.M. Oreper and J. Szekely: J. Fluid Mech., 1984, vol. 147, pp. 53–51.10.1017/S0022112084001981 ↗
2. C. Chan, J. Mazumder, and M.M. Chen: Metall. Mater. Trans. A, 1984, vol. 15A, pp. 2175–84.10.1007/BF02647100 ↗
3. S. Kou and D.K. Sun: Metall. Trans. A, 1985, vol. 16A, pp. 203–13.10.1007/BF02815302 ↗
4. K.C. Tsao and C.S. Wu: Weld. J., 1988, vol. 67 (3), pp. 70s–75s.
5. R. McLay and G.F. Carey: Int. J. Num. Meth. Fluids, 1989, vol. 9, pp. 713–30.10.1002/fld.1650090605 ↗
6. T. DebRoy and S.A. David: Rev. Mod. Phys., 1995, vol. 67 (1), pp. 85–112.10.1103/RevModPhys.67.85 ↗
7. B. Zhang, Y.M. Zhang, and R. Kovaceevic: J. Manuf. Sci. Eng. Trans. ASME, 1998, vol. 120 (12), pp. 600–08.10.1115/1.2830164 ↗
8. W. Pitscheneder, R. Ebner, T. Hong, T. DebRoy, K. Mundra, and R. Benes: Proc. 4th Int. Seminar on Numerical Analysis Weldability, Graz-Seggau, Austria, Sept. 4–5, 1997, The Institute of Materials, London, UK, 1997, pp. 379–95.
9. V. Babu, A.K. Korpela, and N. Ramanan: J. Appl. Phys., 1990, vol. 67, pp. 3990–99.10.1063/1.344982 ↗
10. C. Limmaneevichitr and S. Kou: Weld. J., 2000, vol. 79 (8), pp. 231s–237s.
11. X. He, P.W. Fuerschbach, and T. DebRoy: J. Phys. D: Appl. Phys., 2003, vol. 36, pp. 1388–98.10.1088/0022-3727/36/12/306 ↗
12. X. He, J.W. Elmer, and T. DebRoy: J. Appl. Phys., 2005, vol. 97, pp. 084909:1–084909:9.10.1063/1.1873032 ↗
13. W. Zhang, G.G. Roy, J.W. Elmer, and T. DebRoy: J. Appl. Phys., 2003, vol. 93 (5), pp. 3022–33.10.1063/1.1540744 ↗
14. A. Kumar and T. DebRoy: J. Appl. Phys., 2003, vol. 94 (2), pp. 1267–77.10.1063/1.1587006 ↗
15. W. Zhang: Ph.D. Thesis, Pennsylvania State University, University Park, PA, 2004.
16. S. Bag, A. De, and T. DebRoy: Mater. Manufact. Process., 2003, vol. 24, pp. 384–97.10.1080/10426910802679915 ↗
17. R.T.C. Choo and J. Szekely: Weld. J., 1994, vol. 73 (2), pp. 25s–31s.
18. K. Hong, D.C. Weckman, A.B. Strong, and W. Zheng: Sci. Technol. Weld. Join., 2002, vol. 7 (3), pp. 125–36.10.1179/136217102225002619 ↗
19. K. Hong, D.C. Weckmann, A.B. Strong, and W. Zheng: Sci. Technol. Weld. Join., 2003, vol. 8 (5), pp. 313–24.10.1179/136217103225005507 ↗
20. J. Jaidi and P. Dutta: Sci. Technol. Weld. Join., 2004, vol. 9 (5), pp. 407–14.10.1179/136217104225021814 ↗
21. N. Chakraborty and S. Chakraborty: Trans. ASME, 2005, vol. 127 (4), pp. 848–62.10.1115/1.1928913 ↗
22. J.N. Reddy and D.K. Gartling: The Finite Element Method in Heat Transfer and Fluid Dynamics, 2nd ed., CRC Press, Boca Raton, FL, 2000.
23. O.P. Gupta: Finite and Boundary Element Methods in Engineering, Oxford and IBH Publications, New Delhi, 2002.
24. M.R. Frewin and D.A. Scott: Weld. J., 1999, vol. 78, pp. 15s–22s.
25. J.N. Reddy: Int. J. Num. Methods Fluids, 1982, vol. 2, pp. 151–71.10.1002/fld.1650020204 ↗
26. T.J. Oden, N. Kikuchi, and Y.J. Song: Comput. Meth. Appl. Mech. Eng., 1982, vol. 31, pp. 297–329.10.1016/0045-7825(82)90010-X ↗
27. P. Dutta, Y. Joshi, and R. Janaswami: Num. Heat Transfer A, 1995, vol. 27, pp. 499–518.10.1080/10407789508913715 ↗
28. K. Deb, A. Anand, and D. Joshi: Evol. Comput., 2002, vol. 10, pp. 371–95.10.1162/106365602760972767 ↗
29. S. Bag and A. De: Sci. Technol. Weld. Join., 2009, vol. 14 (4), pp. 333–45.10.1179/136217108X356791 ↗
30. P. Dutta, Y. Joshi, and C. Franche: Exp. Therm. Fluid Sci., 1994, vol. 9, pp. 80–89.10.1016/0894-1777(94)90011-6 ↗
31. G.E. Dieter: Engineering Design—A Material and Processing Approach, McGraw-Hill, New York, 2000.