journal article·2004-11

Neutron diffraction study of texture development during hot working of different gamma-titanium aluminide alloys

H. -G. Brokmeier, M. Oehring, U. Lorenz, F. Appel, H. Clemens

Publisher page

Abstract

The evolution of preferred orientations during processing appears to be of significant importance for the use of γ-titanium aluminide alloys, since the desired lamellar microstructures exhibit a strong anisotropy of mechanical properties. In this work, texture development has been investigated after hot extrusion and sheet rolling, which are considered to be technologically relevant wrought processes. As texture evolution certainly is dependent on several factors, involving deformation properties, recrystallization kinetics, and, particularly, the phase constitution at hot-working temperature, different processing conditions and alloy compositions were investigated. By comparing the results, it is indicated that the determined textures can be understood by the deformation modes of the dominating phase at hot-working temperature and the subsequent phase transformations. However, the current understanding of texture evolution is far from being complete, as no model can be presented which quantitatively accounts for the contribution of the different processes mentioned.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Y.-W. Kim and D.M. Dimiduk: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 531–43.
2. D.M. Dimiduk: Mater. Sci. Eng. A, 1999, vol. 263, pp. 281–88.10.1016/S0921-5093(98)01158-7 ↗
3. M. Yamaguchi, H. Inui, and K. Ito: Acta Mater., 2000, vol. 48, pp. 307–22.10.1016/S1359-6454(99)00301-8 ↗
4. Y. He, R.B. Schwarz, A. Migliori, and S.H. Whang: J. Mater. Res., 1995, vol. 10, pp. 1187–95.10.1557/JMR.1995.1187 ↗
5. M.J. Blackburn: in The Science, Technology and Application of Titanium, R.I. Jaffee and N.E. Promisel, eds., Pergamon Press, Oxford, United Kingdom, 1970, pp. 633–43.10.1016/B978-0-08-006564-9.50071-3 ↗
6. T. Fujiwara, A. Nakamura, M. Hosomi, S.R. Nishitani, Y. Shirai, and M. Yamaguchi: Phil. Mag. A, 1990, vol. 61, pp. 591–606.10.1080/01418619008231937 ↗
7. D.R. Johnson, H. Inui, and M. Yamaguchi: Acta Mater., 1996, vol. 44, pp. 2523–35.10.1016/1359-6454(95)00338-X ↗
8. M. Yamaguchi and Y. Umakoshi: Progr. Mater. Sci., 1990, vol. 34, pp. 1–148.10.1016/0079-6425(90)90002-Q ↗
9. F. Appel and R. Wagner: Mater. Sci. Eng. R., 1998, vol. 22, pp. 187–268.10.1016/S0927-796X(97)00018-1 ↗
10. R.W. Cahn: in High Temperature Aluminides and Intermetallics, S.H. Whang, C.T. Liu, D.P. Pope, and J.O. Stiegler, eds., TMS, Warrendale, PA, 1990, pp. 245–70.
11. R.W. Cahn, M. Takeyama, J.A. Horton, and C.T. Liu: J. Mater. Res., 1991, vol. 6, pp. 57–70.10.1557/JMR.1991.0057 ↗
12. D.E. Larsen, S.L. Kampe, and L. Christodoulou: in Intermetallic Matrix Composites, Materials Research Society Symposia Proceedings, D.L. Anton, R. McMeeking, D. Miracle, and P.L. Martin, eds., MRS, Pittsburgh, PA, 1990, vol. 194, pp. 285–92.
13. A. Hellwig, M. Palm, and G. Inden: Intermetallics, 1998, vol. 6, pp. 79–94.10.1016/S0966-9795(97)00043-5 ↗
14. S.-C. Huang: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 299–307.
15. G.L. Chen, W.J. Zhang, Y. Wang, J.G. Wang, Z.Q. Sun, Y.Q. Wu, and L. Zhou: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 319–24.
16. J.D.H. Paul, F. Appel, and R. Wagner: Acta Mater., 1998, vol. 46, pp. 1075–85.10.1016/S1359-6454(97)00332-7 ↗
17. F. Appel, U. Lorenz, J.D.H. Paul, and M. Oehring: in Gamma Titanium Aluminides 1999, Y.-W. Kim, D.M. Dimiduk, and M.H. Loretto, eds., TMS, Warrendale, PA, 1999, pp. 381–88.
18. W.H. Tian and M. Nemoto: Intermetallics, 1997, vol. 5, pp. 237–44.10.1016/S0966-9795(96)00086-6 ↗
19. U. Christoph, F. Appel, and R. Wagner: Mater. Sci. Eng. A, 1997, vols. 239–240, pp. 39–45.10.1016/S0921-5093(97)00558-3 ↗
20. H.J. Bunge: Text. Microstr., 1989, vol. 10, pp. 265–308.10.1155/TSM.10.265 ↗
21. H.-G. Brokmeier: Text. Microstr., 1999, vol. 33, pp. 13–34.10.1155/TSM.33.13 ↗
22. M. Oehring, U. Lorenz, F. Appel, and D. Roth-Fagaraseanu: in Structural Intermetallics 2001, K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds., TMS, Warrendale, PA, 2001, pp. 157–66.
23. H. Clemens, P. Schretter, K. Wurzwallner, A. Bartels, and C. Koeppe: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 205–14.
24. H. Clemens and H. Kestler: Adv. Eng. Mater., 2000, vol. 2, pp. 551–70.10.1002/1527-2648(200009)2:9<551::AID-ADEM551>3.0.CO;2-U ↗
25. H.-G. Brokmeier, U. Zink, R. Schnieber, and B. Witassek: in Texture and Anisotropy of Polycrystals, R. Schwarzer, ed., TTP Transtech Publications, Zürich; Mater. Sci. Forum, 1998, vols. 273–275, pp. 277–82.10.4028/www.scientific.net/MSF.273-275.277 ↗
26. J. Tobisch and H.J. Bunge: Textures, 1972, vol. 1, pp. 125–27.10.1155/TSM.1.125 ↗
27. M. Dahms and H.J. Bunge: J. Appl. Cryst., 1989, vol. 22, pp. 439–47.10.1107/S0021889889005261 ↗
28. M. Dahms: J. Appl. Cryst., 1992, vol. 25, pp. 258–67.10.1107/S0021889891012499 ↗
29. H.J. Bunge: Mathematische Methoden der Texturanalyse, Akademie Verlag, Berlin, 1969.
30. H.J. Bunge: Texture Analysis in Materials Science, Butterworth Publishers, London, 1982.
31. S. Matthies, H.-R. Wenk, and G.W. Vinel: J. Appl. Cryst., 1988, vol. 21, pp. 285–304.10.1107/S0021889888000275 ↗
32. G. Hug, A. Loiseau, and P. Veyssière: Phil. Mag. A, 1988, vol. 57, pp. 499–523.10.1080/01418618808204682 ↗
33. C. Hartig, X.F. Fang, H. Mecking, and M. Dahms: Acta Metall. Mater., 1992, vol. 40, pp. 1883–94.10.1016/0956-7151(92)90175-E ↗
34. A. Bartels, C. Hartig, S. Willems, and H. Uhlenhut: Mater. Sci. Eng. A, 1997, vols. 239–240, pp. 14–22.10.1016/S0921-5093(97)00556-X ↗
35. A. Bartels, H. Kestler, and H. Clemens: Mater. Sci. Eng. A, 2002, vols. 329–331, pp. 153–62.10.1016/S0921-5093(01)01552-0 ↗
36. H. Hu, P.R. Sperry, and P.A. Beck: Trans. AIME, 1952, vol. 194, pp. 76–81.
37. A. Merlini and P.A. Beck: Trans. AIME, 1955, vol. 203, pp. 385–94.
38. G. Wassermann and J. Grewen: Texturen Metallischer Werkstoffe, Springer-Verlag, Berlin, 1962.10.1007/978-3-662-13128-2 ↗
39. C. Koeppe, A. Bartels, H. Clemens, P. Schretter, and W. Glatz: Mater. Sci. Eng. A, 1995, vol. 201, pp. 182–93.10.1016/0921-5093(94)09754-2 ↗
40. E.A. Calnan and C.J.B. Clews: Phil. Mag., 1950, vol. 41, pp. 1085–1100.10.1080/14786445008561151 ↗
41. C. McCullough, J.J. Valencia, C.G. Levi, and R. Mehrabian: Acta Metall., 1989, vol. 37, pp. 1321–36.10.1016/0001-6160(89)90162-4 ↗
42. J. Grewen: Proc. 3rd Coll. Eur. Sur Textures, Pont-à-Mousson, France, 1973, p. 195.
43. J.W. Christian and D.E. Laughlin: Acta Metall., 1988, vol. 24, pp. 1617–42.10.1016/0001-6160(88)90230-1 ↗
44. M.H. Yoo, C.L. Fu, and J.K. Lee: in Twinning in Advanced Materials, M.H. Yoo and M. Wuttig, eds., TMS, Warrendale, PA, 1994, pp. 97–106.
45. V.K. Vasudevan, M.A. Stucke, S.A. Court, and H.L. Fraser: Phil. Mag. Lett., 1989, vol. 59, pp. 299–307.10.1080/09500838908206358 ↗
46. H. Mecking, C. Hartig, and U.F. Kocks: Acta Mater., 1996, vol. 44, pp. 1309–21.10.1016/1359-6454(95)00308-8 ↗
47. B.K. Kad and R.J. Asaro: Phil. Mag. A, 1997, vol. 75, pp. 87–104.10.1080/01418619708210284 ↗
48. S.H. Whang and Y.D. Hahn: Scripta Metall. Mater., 1990, vol. 24, pp. 1679–84.10.1016/0956-716X(90)90527-N ↗
49. A. Bartels, H. Clemens, C. Hartig, and H. Mecking: in High-Temperature Ordered Intermetallic Alloys VII, Materials Research Society Symposia Proceedings, C.C. Koch, C.T. Liu, N. Stoloff, and A. Wanner, eds., MRS, Warrendale, PA, 1997, vol. 460, pp. 141–46.
50. A. Bartels, W. Schillinger, A. Chatterjee, and H. Clemens: in High-Temperature Ordered Intermetallic Alloys IX, Materials Research Society Symposia Proceedings, J. Schneibel, K.J. Hemker, R.D. Noebe, S. Hanada, and G. Sauthoff, eds., MRS, Warrendale, PA, 2001, vol. 646, pp. N1.5.1-N.1.5.6.
51. P.A. Beck and H. Hu: in Recrystallization, Grain Growth and Textures, H. Margolin, ed., ASM, Cleveland, OH, 1966, p. 393.
52. I.L. Dillamore and H. Katoh: Met. Sci., 1974, vol. 8, p. 73.10.1179/msc.1974.8.1.73 ↗
53. J. Hjelen, R. Ørsund, and E. Nes: Acta Metall. Mater., 1991, vol. 39, pp. 1377–404.10.1016/0956-7151(91)90225-P ↗
54. R.D. Doherty, K. Kashyap, and S. Panchanadeeswaran: Acta Metall. Mater., 1993, vol. 41, pp. 3029–53.10.1016/0956-7151(93)90117-B ↗
55. C.S. Barrett and T. Massalski: Structure of Metals, 3rd ed., Pergamon, Oxford, United Kingdom, 1980.
56. F.J. Humphreys and M. Hatherly: Recrystallization and Related Phenomena, Pergamon, Oxford, United Kingdom, 1995.
57. F. Appel, M. Oehring, and P.J. Ennis: in Gamma Titanium Aluminides 1999, Y.-W. Kim, D.M. Dimiduk, and M.H. Loretto, eds., TMS, Warrendale, PA, 1999, pp. 603–18.
58. F. Appel: Phys. Status Solidi (a), 1989, vol. 116, pp. 153–63.10.1002/pssa.2211160114 ↗
59. F. Appel, U. Sparka, and R. Wagner: Intermetallics, 1999, vol. 7, pp. 325–34.10.1016/S0966-9795(98)00109-5 ↗
60. J.D.H. Paul, U. Sparka, and F. Appel: in Structural Intermetallics 2001, K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds., TMS, Warrendale, PA, 2001, pp. 403–12.
61. M. Oehring, F. Appel, P.J. Ennis, and R. Wagner: Intermetallics, 1999, vol. 7, pp. 335–45.10.1016/S0966-9795(98)00113-7 ↗
62. W.-J. Zhang, U. Lorenz, and F. Appel: Acta Mater., 2000, vol. 48, pp. 2803–13.10.1016/S1359-6454(00)00093-8 ↗
63. I.L. Dillamore and W.T. Roberts: Metall. Rev., 1965, vol. 10, pp. 271–380.10.1179/095066065790138348 ↗
64. F. Appel, M. Oehring, and R. Wagner: Intermetallics, 2000, vol. 8, pp. 1283–312.10.1016/S0966-9795(00)00036-4 ↗