journal article·2011-12Open access

A Revised Criterion for the Portevin–Le Châtelier Effect Based on the Strain-Rate Sensitivity of the Work-Hardening Rate

Peter Van Liempt, Jilt Sietsma

Abstract

An improved analysis is presented of the stability of plastic deformation under conditions where dynamic strain aging (DSA) occurs, which leads to instabilities known as the Portevin-Le Chatelier (PLC) effect. It is shown that PLC instabilities can occur for conditions that are not covered by the currently prevailing criterion presented by Estrin and Kubin (1991), which focuses on a negative strain rate sensitivity of the flow stress, caused by interactions of solutes with thermally activated glide of mobile dislocations. The current analysis recognizes that the strain-rate sensitivity of the flow stress consists of two contributions, one associated with glide of mobile dislocations and the second with work hardening, related to storage of immobile dislocations. In this paper, an instability criterion is proposed that takes into account the possibility of a negative strain-rate sensitivity of the work-hardening rate, which is caused by diffusion of solutes to immobile dislocations. The latter contribution leads to an extended instability criterion. This criterion also provides an explanation for the existence of a critical strain above which instabilities occur. In this article, previously published tensile test data are used to show that a negative strain-rate sensitivity of the work-hardening rate, which influences significantly the occurrence of the PLC effect, can indeed occur under DSA conditions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. R.A. Mulford and U.F. Kocks: Acta Metall., 1979, vol. 27, pp. 1125-34.10.1016/0001-6160(79)90130-5 ↗
2. C. Schwink and A. Nortmann: Mater. Sci. Eng. A, 1997, vols. 234-236, pp. l-7.
3. P. Penning: Acta Metall., 1972, vol. 20, pp. 1169-75.10.1016/0001-6160(72)90165-4 ↗
4. Y. Estrin and L.P. Kubin: Mater. Sci. Eng. A, 1991, vol. 137, pp. 125-34.10.1016/0921-5093(91)90326-I ↗
5. L.P. Kubin and Y. Estrin: Acta Metall., 1985, vol. 33, no. 3, pp. 397-407.10.1016/0001-6160(85)90082-3 ↗
6. A. Korbel and H. Dybiec: Acta Metall., 1980, vol. 29, pp. 89-93.10.1016/0001-6160(81)90089-4 ↗
7. H. Dybiec: Scripta Metall., 1988, vol. 22, pp. 595-99.10.1016/S0036-9748(88)80166-2 ↗
8. L.P. Kubin and Y. Estrin: Scripta Metall., 1989, vol. 23, pp. 815-17.10.1016/0036-9748(89)90537-1 ↗
9. H. Dybiec: Scripta Metall., 1989, vol. 23, pp. 1997-2000.10.1016/0036-9748(89)90498-5 ↗
10. J.R. Klepaczko and C.Y. Chiem: J. Mech. Phys. Solids, 1986, vol. 34, no. 1, pp. 29-54.10.1016/0022-5096(86)90004-9 ↗
11. K. Domkin: Masters Thesis, Luleå University of Technology, Luleå, Sweden, 2005.
12. F.J. Zerilli: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2547-55.10.1007/s11661-004-0201-x ↗
13. U.F. Kocks and H. Mecking: Progr. Mater. Sci., 2003, vol. 48, pp. 171-273.10.1016/S0079-6425(02)00003-8 ↗
14. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865-75.10.1016/0001-6160(81)90112-7 ↗
15. Y. Bergström: Mater. Sci. Eng., 1969/70, vol. 5, pp. 193–200.
16. E. Nes, K. Marthinsena, and Y. Brechet: Scripta Mater., 2002, vol. 47, pp. 607-11.10.1016/S1359-6462(02)00235-X ↗
17. H.P. Stüwe: Acta Metall., 1965, vol. 13, pp. 1337-42.10.1016/0001-6160(65)90045-3 ↗
18. C.Y. Gaoa and L.C. Zhang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3138-43.10.1016/j.msea.2010.01.083 ↗
19. C.G. Schmid and A.K. Miller: Acta Metall., 1982, vol. 30, pp. 615-35.10.1016/0001-6160(82)90110-9 ↗
20. J. Cheng and S. Nemat-Nasser: Acta Mater., 2000, vol. 48, pp. 3131-44.10.1016/S1359-6454(00)00124-5 ↗
21. K. Dehghani and J.J. Jonas: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1375-84.10.1007/s11661-000-0256-2 ↗
22. K. Dehghani: Masters Thesis, McGill University, Montreal, Canada, 1999.
23. G.A. Henshall and A.K. Miller: Acta Metall., 1989, vol. 37, no. 10, pp. 2693-2704.10.1016/0001-6160(89)90303-9 ↗
24. D.J. Lloyd and K. Tangri: Mater. Sci. Eng., 1972, vol. 10, pp. 75-80.10.1016/0025-5416(72)90070-5 ↗
25. W.A. Spitzig and R.J. Sober: Mater. Sci. Eng., 1975, vol. 20, pp. 179-84.10.1016/0025-5416(75)90147-0 ↗
26. B.J. Brindley and J.T. Barnby: Acta Metall., 1966, vol. 14, pp. 1765-80.10.1016/0001-6160(66)90028-9 ↗
27. D.V. Wilson and B. Russell: Acta Metall., 1960, vol. 8, pp. 36-45.10.1016/0001-6160(60)90138-3 ↗
28. W.C. Leslie: The Physical Metallurgy of Steels, McGraw-Hill, New York, NY, 1981.
29. S. Rajesh and G. Ananthakrishna: Phys. Rev. E, 2000, vol. 61, no. 4, pp. 3664-74.10.1103/PhysRevE.61.3664 ↗
30. C. Fressengeas, A.J. Beaudoin, M. Lebyodkin, L.P. Kubin, and Y. Estrin: Mater. Sci. Eng. A, 2005, vols. 400-1, pp. 226-30.10.1016/j.msea.2005.02.073 ↗
31. G. Ananthakrishna and M.S. Bharathi: Phys. Rev. E, 2004, vol. 70, pp. 026111-1-15.10.1103/PhysRevE.70.026111 ↗
32. H. Ait-Amokhtara, C. Fressengeas, and S. Boudrahema: Mater. Sci. Eng. A, 2008, vol. 488, pp. 540-46.10.1016/j.msea.2007.11.075 ↗
33. H.M. Zbib and E.C. Aifantis: Scripta Metall., 1988, vol. 22, pp. 1331-36.10.1016/S0036-9748(88)80157-1 ↗
34. P. Hähner: Mater. Sci. Eng. A, 1996, vol. 207, pp. 208-15.10.1016/0921-5093(95)10033-4 ↗
35. M.A. Soare and W.A. Curtin: Acta Mater., 2008, vol. 56, pp. 4046-61.10.1016/j.actamat.2008.04.027 ↗
36. A.H. Cottrell and B.A. Bilby: Proc. Phys. Soc. LXII, 1948, vol. I-A, pp. 49-62.
37. J.Z. Zhao, A.K. De, and B.C. De Cooman: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 417-23.10.1007/s11661-001-0273-9 ↗
38. A.S. Keh, Y. Nakada, and W.C. Leslie: Dislocation Dynamics, Ed. A.R. Rosenfield, McGraw-Hill, New York, NY, 1968, pp. 381-408.
39. U.F. Kocks, R.E. Cook, and R.A. Mulford: Acta Metall., 1985, vol. 33, no. 4, pp. 623-38.10.1016/0001-6160(85)90026-4 ↗
40. Y. Bergström: Rev. Powder Met. Phys. Cer., 1983, pp. 79–265.
41. A. Karimi Taheri, T.M. Maccagno, and J.J. Jonas: ISIJ Int., 1995, vol. 35, no. 12, pp. 1532-40.10.2355/isijinternational.35.1532 ↗
42. A. Gilat and X. Wu: Int. J. Plast., 1997, vol. 13, nos. 6–7, pp. 611-32.10.1016/S0749-6419(97)00028-4 ↗
43. P.G. McCormick: Acta Metall., 1988, vol. 36, no. 12, pp. 3061-67.10.1016/0001-6160(88)90043-0 ↗
44. P. van Liempt, M. Onink, and A. Bodin: Adv. Eng. Mat., 2002, vol. 4, no. 4, pp. 225-32.10.1002/1527-2648(200204)4:4<225::AID-ADEM225>3.0.CO;2-7 ↗